2013 VOLKSWAGEN BEETLE CONVERTIBLE warning

Fig. 140 Convertible top emergency closing (2).
Please first read and note the introductory information and heed the WARNINGS on
page 290.
The convertible top can be closed by hand if there is a malfunction ⇒ . Before using the
emergency closing function, make sure the preliminary requirements for the normal convertible top
closing process are met 64.
Only use the convertible top emergency closing procedure if the top will not close even though all
of the technical requirements are met, or if all of the requirements cannot be met.
The X indicator light in the instrument cluster will flash if there is a convertible top malfunction. A
message providing information or instructions may also appear in the instrument cluster display. Only
perform these steps in the specified order.
1. Release the convertible top
Release the open convertible top as follows:
x Remove the cover (boot) from the convertible top if it is installed .
x Remove the hexagonal socket wrench for releasing the convertible top, the emergency handle for
latching the convertible top, and the screwdriver from the vehicle tool kit
x Unscrew the bolts ⇒ fig. 139 A (1) (arrow) on both sides of the convertible top counterclockwise
using the rounded end of the hexagonal socket wrench. Remove the bolts completely.
2. Close the convertible top
Lift the convertible top out of the tray and close it by hand as follows:
x Close the convertible top until it meets the windshield B (2) (arrow). Have a second person help
(one person on either side), if necessary ⇒ .
3. Latch the convertible top
Latch the convertible top using the emergency handle as follows:
x Carefully remove the front cover under the convertible top using the flat blade of the screwdriver
⇒ fig. 140 C (3). The emergency locking mechanism is located behind it.
x Push the end of the screw in the top of the emergency handle down so the end of the screw is
flush with the top of the handle.
x Insert the emergency handle in the emergency release opening and turn until it locks into place D
(4) (small arrow).
x Keep the handle pressed in place and turn the screw in the center of the emergency clockwise to
tighten using the Phillips head end of the screwdriver D (4).
x Turn the handle counterclockwise to open the convertible top hooks. You may have to push up on
the front of the convertible top slightly so the hooks can open all the way.

x Pull the convertible top down using the emergency handle and turn the handle clockwise until the
convertible top latches completely and securely. The X indicator light goes out.
x Turn the screw in the center of the emergency handle counterclockwise to loosen using the Phillips
head end of the screwdriver and remove the handle.
x Reinstall the front cover over the emergency lock opening.
x Put the hexagonal socket wrench, emergency handle, and screwdriver back into the vehicle tool kit
298.
x Drive to an authorized Volkswagen dealer or an authorized Volkswagen Service Facility to have
the convertible top serviced. The bolts that were removed cannot be reused and must be replaced with
new bolts before the top can be opened again ⇒ .
WARNING
The wind generated by driving can open the convertible top if it is not latched. This can cause
accidents and serious injuries.
x Never drive if the convertible top is not latched.
CAUTION
To help reduce the risk of personal injury, never touch moving parts when the convertible top
is closing.
x Always be careful not to pinch your hands when closing the convertible top manually.
x Always be careful not to pinch yourself or others when pressing the convertible top onto
the windshield frame.
NOTICE
To help prevent significant vehicle damage, do not operate the convertible top after performing
the emergency closing procedure until the bolts are replaced with correct, new bolts by an
authorized Volkswagen dealer or an authorized Volkswagen Service Facility.
Emergency release for the selector lever

Fig. 141 Removing the selector gate cover.

Please first read and note the introductory information and heed the WARNINGS
The vehicle tool kit is in the luggage compartment in one of several places, such as under the luggage
compartment floor panel.
x Open the luggage compartment lid 134.
x Lift the floor panel ⇒ fig. 143 (1) and remove it from the luggage compartment.
Completely retract the jack after use. Otherwise it will not fit in its compartment and cannot be
stowed safely.
Contents

Fig. 144 Contents of the vehicle tool kit.

Installing the wheel cover (Version 2)
x Press the wheel cover onto the wheel rim. Make sure that the wheel cover is latched onto the rim
along the entire circumference.
Wheel bolt caps

Fig. 149 Pulling cover caps off wheel bolts.
Please first read and note the introductory information and heed the WARNINGS
x Take the wire clip out of the vehicle tool kit .
x Insert the wire clip through the opening of the cover cap ⇒ fig. 149 and pull off in the direction of
the arrow.
The caps are designed to protect the wheel bolts and should be installed again after the wheel
change.
The anti-theft wheel bolt has a separate cap. This only fits the anti-theft wheel bolt, but not the
standard wheel bolts.

WARNING
Changing a wheel, especially on the side of the road, can be dangerous. To help reduce the
risk of serious personal injury:
x Always stop the vehicle as soon as it is safe to do so. Move the vehicle a safe distance off
the road where it is safe to change the wheel.
x Always make sure that all passengers, especially children, are in a safe place outside the
vehicle and away from the vehicle and traffic (such as behind a guard rail).
x Turn on the emergency flashers and set up another warning device about 25 yards
(25 meters) behind the vehicle to warn approaching traffic.
x Change a wheel by yourself only if you are familiar with the necessary steps. Otherwise,
get expert assistance.
x Always switch the engine off, firmly apply the parking brake, and shift the transmission
into Park (P) (automatic transmission) or any gear (manual only) to help prevent the vehicle
from moving suddenly and slipping off the jack.
x Always make sure that the ground is level and firm. If necessary, place the jack on a large
and sturdy board or on a similar ground support.
x Always block the wheel diagonally opposite the wheel being changed with chocks or other
similar things.
x Always use proper and undamaged tools when changing a wheel.
x Once a wheel is lifted off the ground, having the transmission in Park (P) or in gear will not
prevent sudden vehicle movement.
x Always use a jack that has been approved by the manufacturer for your vehicle. Never use
other jacks, even if they have been approved for use on other Volkswagen models.
x To reduce the risk of losing control, crashes, and serious personal injuries, never loosen
the screws on rims with threaded rim rings.
x After changing a wheel, have the wheel bolt tightening torque checked with an accurate
torque wrench.
x After changing a wheel or tire, reset the Tire Pressure Monitoring System

WARNING
Improper replacement of burned out headlights and other light bulbs can cause serious
personal injury.
x Stop! Always read and heed the WARNINGS before doing any work in the engine
compartment 224. The engine compartment of any motor vehicle is a potentially dangerous
area, and work in this area can lead to serious personal injury.
x HID – High Intensity Discharge (Xenon) headlights get power from a high voltage source
that can cause severe personal injury and even death if handled improperly.
x HB2 (H4) bulbs and HID – High Intensity Discharge (Xenon) headlights are under high
pressure and can explode if handled improperly.
x Always let a burned out light bulb cool down before replacing it.
x Never replace a light bulb unless you are familiar with all of the necessary procedures. In
particular, never remove a headlight unless you know exactly how to carry out the job and
have the correct tools and light bulbs.
x If you are uncertain about what to do, have the work performed by an authorized
Volkswagen dealer, an authorized Volkswagen Service Facility, or another qualified
workshop. Serious personal injury may result from improperly performed work.
x We strongly recommend that you always have HID – High Intensity Discharge (Xenon)
headlights and HB2 (H4) bulbs replaced by a qualified technician.
x Do not touch the glass of light bulbs with your bare hands. Fingerprints left on the bulb
evaporate due to the heat when the bulb is switched on and cause the reflector to “cloud.”
x There are sharp edges on and around the headlight housing in the engine compartment
and the rear light housing. Wear hand protection if you replace bulbs.
NOTICE
After replacing a headlight bulb or other light bulb, always make sure that the rubber covers or
plastic caps have been properly and securely reinstalled to help prevent water from getting
into the electrical connections and headlight housing and damaging the electrical system.
You cannot replace the LEDs in LED daytime running lights. Contact your authorized
Volkswagen dealer or an authorized Volkswagen Service Facility for assistance.
Indicator light
Please first read and note the introductory information and heed the WARNINGS on
page 309.

Lights
up Possible cause Proper response
 Light bulb of the exterior vehicle lighting
not working. Replace the light bulb that isn't working.

When the ignition is switched on, several warning and indicator lights come on briefly for a function
check. They go out after a few seconds.

WARNING
Failure to heed warning lights and instrument cluster text messages can cause the vehicle to
break down in traffic and result in a collision and serious personal injury.
x Never ignore warning lights or text WARNINGS.
x Always stop the vehicle as soon as it is safe to do so.
NOTICE
Failure to heed warning lights or text WARNINGS can result in vehicle damage.
Failure of a single LED within a taillight is not indicated. However, the = indicator light will come
on if all LEDs fail.
Information on light bulb replacement

WARNING
Disregarding the safety-related checklist may lead to accidents and serious personal injuries.
x Always review and follow the checklist. Follow accepted safety practices and use common
sense.
NOTICE
Always insert and remove lamps carefully to help prevent damage to the vehicle paint or to
other parts of the vehicle.