30
30
About handling the
iPod
• This unit supports only an iPod fea-
turing the Dock connector port.
• Op e
rations may vary depending on
the software version of iPod.
• Th e i
Pod Equalizer set by the iPod
is forcibly turned off.
• Th e S
huffle function of the iPod is
operated as Random on this unit.
CAUTION
Store the data into another
media, to avoid losing the
data during iPod operation
with this unit.
Do not allow direct sunlight
to fall on the iPod when it is
not being used. Extended
exposure to direct sunlight
can result in iPod malfunction
due to the resulting high
temperatures.
Do not leave the iPod in
high temperatures or direct
sunlight.
Fix the iPod securely when
using with this unit. Do not
let the iPod fall onto the floor,
where it may become jammed
under the brake or accelerator
pedal.
•
•
•
•
For details, refer to the User Guide of
your iPod.
About iPod software version
The iPod software versions that can
be used with this unit are as follows
(operations verified as of January
2012):
•
Made for
iPod (5th generation)
ver. 1.3
iPod classic ver. 1.1.2
iPod classic 120 GB ver. 2.0.1
iPod classic 160 GB ver. 2.0.4
iPod nano
(1st generation) ver. 1.3.1
iPod nano
(2nd generation) ver. 1.1.3
iPod nano
(3rd generation) ver. 1.1.3
iPod nano
(4th generation) ver. 1.0.4
iPod nano
(5th generation) ver. 1.0.2
iPod nano
(6th generation) ver. 1.0
iPod touch
(1st generation) iOS 3.1.3
iPod touch
(2nd generation) iOS 3.1.3
iPod touch
(3rd generation) iOS 5.0
iPod touch
(4th generation) iOS 5.0
iPhone iOS 3.1.3
iPhone 3G iOS 3.1.3
iPhone 3GS iOS 5.0
iPhone 4 iOS 5.0
iPhone 4S iOS 5.0
* Please note that no guarantee
applies to iPod operations and future
updated versions of iPod software.
31
31
Connecting the iPod
(iPhone)
Connect the USB connector.
Connect the iPod as indicated in
the figure below using an optional
cable.
Push the Dock connector into the
Dock connector port until you
hear a click to connect firmly. If it
does not go in smoothly, it may be
upside down so do not force it in
as this may result in damage.
To the vehicle's
connector
*3
*1
USB port
*2Jack port
Dock
connector iPod (iPhone) with Dock
connector port
When connecting the iPod, remove
a headphone cable from the iPod.
When connecting the iPod, it is
recommended to use a separately
purchased car kit.
*1
It is recommended to use a USB
cable which satisfies USB 2.0
standards.
(Measurements should satisfy USB
2.0 standards.)
*2 Fo
r United States model only.
Vehicle AUX jack will not function
as a AUX input.
*3 Co
nnection location differs depend -
ing on the vehicle.
Vehicle
type Connection location
tC Connect to the connector near the shift knob.
xB Connect to the connector near the parking brake.
xD Connect to the connector near the cup holder.
iQ Connect to the connector near the shift knob.
FR-S Connect to the connector near the shift knob.
As soon as the iPod is connected, its
power is automatically turned on.
While the iPod is connected to this
unit, indicates that an accessory
has been connected to the iPod. When the ignition switch is set
to ACC or ON, the iPod’s battery
is charged while the iPod is
connected to this unit.
You cannot use the iPod’s remote
control at the same time.
You may hear noise if you
disconnect during iPod playback.
NOTICE
To resolve most problems
when using your iPod with
the Scion Audio system,
disconnect your iPod from the
vehicle iPod connection and
reset it.
For instructions on how to
reset your iPod, refer to the
User Guide of your iPod.
Connect the Dock connector
directly to the iPod with
Dock connector port. Do not
connect it via the iPod Dock or
other connection.
When the iPod is connected
to this unit, sound will also be
heard from the headphone of
the iPod.
Disconnect the headphone
from the iPod before use.
•
•
•
•
•
•
•
•
