2013 TOYOTA xD ESP

60
60
Setting Up the Phone
An explanation regarding how to
set up hands-free phoning follows.Establishing the Sound Settings
for Hands-Free Phoning
You can adjust the call and ring tone
volumes, as well as the ring tone
type.
1. To

uch [
] d [Phone] d [Phone
Sound Settings].
2. To

uch any of the setting items
below to establish the sound
settings.
Touch [Default] to return to the fac-
tory settings.
[Call
Volume] Touch [+] to increase
the call volume
incrementally; touch
[–] to decrease the call
volume incrementally.
Touch [OK] after
establishing the Call
Volume settings.
•
[Ring Tone
Volume]Touch [+] to increase
the ring tone volume
incrementally; touch
[–] to decrease the
ring tone volume
incrementally. Touch
[OK] after establishing
the Ring Tone Volume
settings.
[Ring Tone] Touch on one of [Tone 1] - [Tone 3] to select
the ring tone, and then
touch [OK].
3 . To

uch [Save].
Setting Up Automatic Updates
for Contacts
You can set up an option for auto -
matically updating contacts in the
system using the address book of
the cell phone that is connected.
1. To

uch [
] d [Phone] d
[Phonebook] d [Manage
Contacts] d [Transfer Contacts].
2. To

uch [Automatically Download
Contacts], and then touch either
[On] or [Off].
•
[0 - 9] Use this to forward the tone data. Input the
tone data and touch
[Send].
[Mute] Mutes the dial tone.
[Handsfree
Mode] Touch this to change
to hands-free phoning
when directly
manipulating the cell
phone during a call.
NOTE
You cannot change to hands-
free phoning by touching
[HandsfreeMode], when the
source is BeSpoke or Bluetooth
Audio.
Select another source to change
to hands-free phoning(Bluetooth
phone).
Changing to a Phone That Will
be Connected to the System
Up to five Bluetooth devices can be
registered to the system. You can
switch the phone to be used for
hands-free phoning to another phone
that has been registered.
Touch [Connect Phone], and then
touch on the phone that you want to
connect.
•

6
6
• The folder selection sequence for playback
and other operations becomes the writing
sequence used by the writing software.
For this reason, the expected sequence at
the time of playback may not coincide with
the actual playback sequence. However,
there also is some writing software which
permits setting of the playback order.
IMPORTANT
When naming an MP3/ WMA
file, add the corresponding
filename extension (.mp3,
.wma).
This unit plays back files
with the filename extension
(.mp3, .wma) as an MP3/ WMA
file. To prevent noise and
malfunctions, do not use these
extensions for files other than
MP3/ WMA files.
•
•
MP3 additional
information
•
Files are compatible with the ID3 Tag Ver.
1.0, 1.1, 2.2, 2.3 and 2.4 formats for display
of album (disc title), track (track title), artist
(track artist) and comments. Ver. 2.x of ID3
Tag is given priority when both Ver. 1.x and
Ver. 2.x exist.
• The

emphasis function is valid only when
MP3 files of 32 kHz, 44.1 kHz and 48 kHz
frequencies are played back. (16 kHz,
22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz,
48 kHz sampling frequencies can be played
back.)
• There is no m3u playlist compatibilit

y.
• There is no compatibility with the MP3i
(MP3 interactive) or mp3 PRO formats.
• The sound quality of MP3 files generally
becomes bet

ter with an increased bit
rates. This unit can play recordings with
bit rates from 8 kbps to 320 kbps, but
in order to be able to enjoy sound of a
cert

ain quality, we recommend using only
discs recorded with a bit rate of at least
128 kbps.
MP3 and WMA files
• MP3 is short for MPEG Audio Layer 3 and
refers to an audio compression technology
standard.
• WMA is short for Windows Media™
Audio and refers to an audio compression
technology that is developed by Microsoft
Corporation. WMA data can be encoded by
using Windows Media Player.
• With some applications used to encode
WMA files, this unit may not operate cor-
rectly.
• With some applications used to encode
WMA files, album names and other text
information may not be correctly displayed.
• This unit allows playback of MP3/WMA files
on CD-ROM, CD-R, CD-RW discs and USB
portable audio player/USB memory. Disc
recordings compatible with level 1 and level
2 of ISO9660 and with the Romeo and Joliet
file system can be played back.
• MP3/WMA files are not compatible with
packet write data transfer.
• The maximum number of characters which
can be displayed for a file name, including
the extension (.mp3, .wma), is 32, from
the first character.
• The maximum number of characters whic

h
can be displayed for a folder name is 32.
• In case of files recorded according to the
Romeo file system, only the first 32 c

har-
acters can be displayed.

66
66
USB portable audio
player/ USB memory
compatibility
• USB version: 2.0, 1.1 and 1.0
• USB data transfer rate: High speed
•
USB Class: MSC (Mass Storage Class) device• Protocol: Bulk
• Minimum amount of memory: 256 MB
• Maximum amount of memory: 250 GB
• File system: FAT32 and FAT16
• Supply current: 1 A
NOTES
Partitioned USB memory
is not compatible with this
unit.
Depending on the kind of
USB portable audio player/
USB memory you use, this
unit may not recognize
the USB audio player/USB
memory or audio files
may not be played back
properly.
•
•
This unit can playback
files in the USB portable
audio player/USB memory
that is USB Mass Storage
Class. However, copyright
protected files that are
stored in above-mentioned
USB devices cannot be
played back. (If the iPod is
connected to this unit, file
playback condition depends
on the iPod specifications.)
You cannot connect a USB
portable audio player/USB
memory to this unit via a
USB hub.
Not all multimedia portable
devices are compatible.
We cannot guarantee
compatibility with all USB
mass storage devices and
assumes no responsibility
for any loss of data on media
players, smart phones, or
other devices while using this
product.
•
•
•
•
It is not possible to check
folders that do not include
MP3/ WMA files. (These
folders will be skipped
without displaying the
folder number.)
MP3/ WMA files in up to
eight tiers of folders can
be played back. However,
there is a delay in the
start of playback on discs
and USB portable audio
player/USB memory with
numerous tiers. For this
reason we recommend
creating discs with no more
than two tiers.
It is possible to playback up
to 19
 f

olders on one disc.
It is possible to playback up
to  55 f

olders on one USB
portable audio player/USB
memory.
•
•
•
•

70
70
BeSpoke Troubleshooting
SymptomAction
BeSpoke does not work.
Is the application installed in the iPhone?
Are you logged in?
Please check the iPhone.
Forgotten the password for
BeSpoke.Reset Password from the iPhone.
You can change the password from the link that will be sent to your registered mail
address.
The map does not display.
Are you in the coverage area?
Is the cable connected correctly?
The map does not scroll.Flick operation is not supported.
Scroll the map by dragging it with your finger.
There is no sound from the
internet radio.Are you in the coverage area?
Switch the source to iPod or Pandora, and then to BeSpoke.
The Voice Recognition does not
work.
Start talking after the beep stops.
Start talking within 3 seconds after the beep stops.
Is the Bluetooth connected?
Are you in the coverage area?
* Touch [] on your iPhone and then use [Help] to check the operating procedures for each icon.
* For more details, please visit our website at w w w.Scion.com/BeSpoke.

71
71
Error indications
If the CD player does not work, the CD stops suddenly during playback, or a similar problem occurs, an error
indication will appear on the display. The cause of the trouble will be indicated by an error number, and you
should check the corresponding item shown in the table below.
Check DISCWhen the disc is dirty or has been inserted upside-down.
Check the disc.
DISC ErrorThere is probably an electrical or mechanical fault in the CD player.
Contact your Scion dealer and ask for repair.
No music files found.
This appears when an MP3/WMA file format is unusual and not supported by this unit
like WAV format recordings.
Please check the MP3/WMA file format.