5
5
[Advanced
Sound
Retriever]The Sound Retriever
function provides a
wide, deep and rich
quality to CD/MP3/
WMA /USB/iPod
sound, which gives
the user a lively
impression.
Establish the Sound
Retriever mode by
touching either [Low
Rate] or [High Rate].
Touch [Off] to
deactivate the Sound
Retriever.NOTICE
The Sound Retriever function
can only be selected when
playing MP3/ WMA from CD
and iPod, USB portable audio
player/USB memory.
The Sound Retriever function
does not support external
compressed audio media.
BASS function and TREBLE
function values can be set for
each of the modes (AM, FM,
CD/MP3/ WMA, iPod/ USB
portable audio player/ USB
memory, XM Satellite Radio).
When you switch modes, the
settings change to the BASS
and TREBLE values set for the
selected mode.
The ASL function is only
ef fective when the vehicle is
moving.
•
•
•
•
Setting Up the Subwoofer
Touch [Sub -W] on the Sound
Settings menu to display the
Subwoofer Settings Menu and then
touch on the settings that follow to
set them up.
( This will only display when the sub -
woofer settings have been activated.
You can set this item, when the
[Subwoofer Setting] is set to [ON].
(page 52)) After the end of setup,
touch [OK] to return to the previous
screen.
[Phase] Establish the
Subwoofer Output
Phase mode by
touching either
[NORMAL] or
[REVERSE].
[Level
Adjustment] Each time you touch
[+], the subwoofer
level steps increase
up to a maximum level
of 6.
Each time you touch
[–], the subwoofer
level steps decrease
down to a minimum
level of -24.
•