2013 TOYOTA SEQUOIA Owners Manual

Page 625 of 740

TOYOTA SEQUOIA 2013 2.G Owners Manual 5
When trouble arises
625
5-1. Essential information
If your vehicle needs to be towed
Before towingThe following may indicate a problem with your transmission. Contact
your Toyota dealer before towin

Page 626 of 740

TOYOTA SEQUOIA 2013 2.G Owners Manual 626 5-1. Essential information
Type BTowing eyelet
■Emergency towin g procedure
The engine switch must be in the ACC (engine off) or the ON
(engine running) position.
4WD models: Put the front wheel

Page 627 of 740

TOYOTA SEQUOIA 2013 2.G Owners Manual 5
When trouble arises
627
5-1. Essential information
Towing with a sling-type truck
NOTICE
■
To prevent causing serious da mage to the transmission
Never tow this vehicle from the rear with the four

Page 628 of 740

TOYOTA SEQUOIA 2013 2.G Owners Manual 628 5-1. Essential information
Towing with a wheel lift-type truck from the frontUse a towing dolly under the rear
wheels.
Towing with a wheel lift-type truck from the rear2WD models Turn the engine s

Page 629 of 740

TOYOTA SEQUOIA 2013 2.G Owners Manual 5
When trouble arises
629
5-1. Essential information
4WD models
When not using a towing dolly,
turn the engine switch to the
ACC position, shift the shift lever
to N and put the front wheel drive
cont

Page 630 of 740

TOYOTA SEQUOIA 2013 2.G Owners Manual 630 5-1. Essential information
Using a flat bed truckIf your Toyota is transported by a
flat bed truck, it should be tied
down at the locations shown in
the illustration.
Vehicles without electronica

Page 631 of 740

TOYOTA SEQUOIA 2013 2.G Owners Manual 5
When trouble arises
631
5-1. Essential information
If you think something is wrong
If you notice any of the following symptoms, your vehicle probably
needs adjustment or repair. Contact your Toyota

Page 632 of 740

TOYOTA SEQUOIA 2013 2.G Owners Manual 632
5-1. Essential information
Fuel pump shut off system
Follow the procedure below to restart the engine after the system is
activated.Turn the engine switch to the ACC or LOCK position.
Restart the