2013 TOYOTA SEQUOIA lock

420 3-4. Using the rear seat entertainment system
●Setting the angle mark
If the BD/DVD disc has angle opti ons, you can turn the angle mark
on/off.
Each time “Angle Mark” is
selected, “ON” or “OFF” can be
selected.
● Setting the DVD parental lock
The level of viewer restrictions can be set.
Select “DVD Parental Lock”. Input the 4-digit personal code
and then select “OK”.
Select 10 times to reset
the personal code in case the
code was forgotten.
Select a restriction level (1-8)
and then select “OK”.

421
3-4. Using the rear seat entertainment system
3
Interior features
●
Setting the BD parental lock
The age of viewer restrictions can be set.
Select “BD Parental Lock”. Input the 4-digit personal code
and then select “OK”.
Select 10 times to reset
the personal code in case the
code was forgotten.
Input a restriction age (0-255)
and then select “OK”.
● Setting a quick playback (BD video)
After inserting a BD disc you can skip over to the first playback
point and can immediately playback the main story.
Each time “Quick Playback” is
selected, “ON” or “OFF” can be
selected.

444 3-4. Using the rear seat entertainment system
■SD cards that can be used ( P. 397)
■ Compatible files
The following files can be displayed.
●Picture file format: JPEG
• Picture resolution: between 34 34 and 8192 8192 pixels
• Gray scale JPEG is not supported
● Video file format: AVCHD
■ SD cards
●An SD card is not provided with the rear seat entertainment system and
needs to be purchased separately.
● Compatible formats
This system is compatible with SD memory cards that meet SD card spec-
ifications FAT16 formats, SDHC memory cards in FAT32 format, and
SDXC memory cards in exFAT format.
● The Panasonic SD memory card format software version 3.1 or higher is
recommended.
● Data stored in an SD card may be lost. Before playing back pictures and
videos stored in an SD card, make certain to back up the data.
● Before an SD card that contains any kind of data is played, slide the lock
switch on the SD card to “LOCK” in order to prevent any data from being
accidentally deleted or overwritten.
CAUTION
■SD cards
Keep away from children.
These are small and if swallowed by a child they can cause choking.

449
3-5. Using the hand
s-free phone system (for cellular phone)
3
Interior features
TitlePage
Using the hands-free phone system
■ Operating the system by using a voice
command
■ Using the hands-free phone system for
the first time
■ Menu list of the hands-free phone sys-
tem
P. 452
Making a phone call
■ Dialing by inputting a number
■ Dialing by inputting a name
■ Speed dialing
■ When receiving a phone call
■ Transferring a call
■ Using the call history memory
P. 461
Setting a cellular phone
■ Registering a cellular phone
■ Selecting the cellular phone to be used
■ Changing a registered name
■ Listing the registered cellular phones
■ Changing the passkey
■ Turning the hands-free phone auto-
matic connection on/off
P. 465
Security and system setup
■ Setting or changing the PIN
■ Locking or unlocking the phone book
■ Setting voice guidance volume
■ Initialization
P. 469
Using the phone book
■ Adding a new phone number
■ Setting speed dials
■ Changing a registered name
■ Deleting registered data
■ Deleting speed dials
■ Listing the registered data
P. 472

458 3-5. Using the hands-free phone system (for cellular phone)
“Setup”“Security”
“Set PIN” Setting a PIN code
“Phonebook
Lock”
Locking the phone book
“Phonebook
Unlock” Unlocking the phone book
“Phone
Setup” “Pair Phone”
Registering the cellular phone
to be used
“Change
Name” Changing a registered name
of a cellular phone
“Delete
Phone” Deleting a registered cellular
phone
“List phones” Listing the registered cellular
phones
“Select
phone” Selecting a cellular phone to
be used
“Set Passkey” Changing the passkey
“Hands-free
power” Setting the hands-free power
on/off
“System
Setup” “Guidance
Vol u me ”
Setting voice guidance vol-
ume
“Device
Name” Displaying device information
“Initialize” Initialization
First menuSecond menuThird menuOperation detail

459
3-5. Using the hand
s-free phone system (for cellular phone)
3
Interior features
■Using a short cut key
First menuSecond menuOperation detail
“Dial XXX (name)” - Dialing a number registered
in the phone book
“Dial XXX (number)” - Dialing the input numbers
“Phone book add
entry” - Adding a new number
“Phone book
change name” -Changing the name of a
phone number in the phone
book
“Phone book delete
entry” - Deleting phone book data
“Phone book set
speed dial” - Registering a speed dial
“Phone book delete
speed dial” - Deleting a speed dial
“Phonebook” “Phonebook Unlock” Unlocking the phone book
“Phonebook Lock” Locking the phone book

469
3-5. Using the hands-free phone system (for cellular phone)
3
Interior features
Security and system setup
Setting or changing the PIN■ Setting a PIN
Select “Set PIN” by using a voice command or .
Enter a PIN by using a voice command or .
When using , input the code 1 digit at a time.
To enter the menu of each setting, follow the steps below:
■ Security setting items and operation procedure
● Setting or changing t he PIN (Personal Identification Number)
1. “Setup”  2. “Security”  3. “Set PIN”
● Locking the phone book
1. “Setup”  2. “Security”  3. “Phonebook Lock”
● Unlocking the phone book
1. “Setup”  2. “Security”  3. “Phonebook Unlock”
■ System setup items and operation procedure
●Setting voice guidance volume
1. “Setup”  2. “System Setup”  3. “Guidance Volume”
● Displaying the Bluetooth
® device address and name
1. “Setup”  2. “System Setup”  3. “Device Name”
● Initialization
1. “Setup”  2. “System Setup”  3. “Initialize”
can only be used for system setup operation.

470 3-5. Using the hands-free phone system (for cellular phone)
■Changing the PIN
Select “Set PIN” by using a voice command or .
Enter the registered PIN by using a voice command or
.
Enter a new PIN by using a voice command or .
When using , input the code 1 digit at a time.
Locking or unlocking the phone book Select “Phonebook lock” or “Phonebook unlock” by using a
voice command or .
Input the PIN by either of the following methods and select
“Confirm” by using a voice command or :
a. Press the talk switch and say the registered PIN.
b. Input a new PIN by using .
Setting voice guidance volume
Select “Guidance Volume” by using .
Change the voice guidance volume.
To decrease the volume: Turn counterclockwise.
To increase the volume: Turn clockwise.