2013 TOYOTA PRIUS PLUS display

275 2-4. Using other driving systems
2
When driving
PRIUS +_OM_OM47841E_(EE)
Changing the vehicle-to-vehicle distance
Pressing the button changes
the vehicle-to-vehicle dis-
tance as follows:
Long
Medium
Short
The vehicle-to-vehicle distance
is set automatically to long
mode when the “POWER”
switch is turned to ON mode.
If a vehicle is running ahead of
you, the preceding vehicle
mark will also be displayed.
Vehicle-to-vehicle distance settings
Select a distance from the table below. Note that the distances
shown correspond to a vehicle speed of 80 km/h (50 mph). Vehi-
cle-to-vehicle distance increases/decreases in accordance with
vehicle speed.
Preceding vehicle mark
Distance optionsVehicle-to-vehicle distance
LongApproximately 50 m (160 ft.)
MediumApproximately 40 m (130 ft.)
ShortApproximately 30 m (100 ft.)

283 2-4. Using other driving systems
2
When driving
PRIUS +_OM_OM47841E_(EE)
Warning lights, warning code and buzzers for dynamic radar cruise
control
Warning lights, warning code and buzzers are used to indicate a system
malfunction or to inform the driver of the need for caution while driving.
The warning codes displayed on the meter indicate the following situations.
Fix each problem in accordance with the correction procedure, and check
that the system is operating normally.
If the warning code persists even after fixing, have the vehicle inspected by
any authorized Toyota dealer or repairer, or another duly qualified and
equipped professional.
Warning code/
warning lightDetailsCorrection procedure
(yellow)Indicates that the radar
cruise control sensor is
dirty or covered with
ice.Clean the sensor.
(yellow)Indicates that the radar
cruise control system is
unable to judge vehi-
cle-to-vehicle distance.If the windshield wip-
ers are on, turn them
off or set them to either
the intermittent or the
slow mode.
(yellow)Indicates a malfunction
in the radar cruise con-
trol system.Press the “ON-OFF”
button once to deacti-
vate the system, and
then press the button
again to reactivate the
system.

300
2-4. Using other driving systems
PRIUS +_OM_OM47841E_(EE)
PCS (Pre-Crash Safety System)
: If equipped
When the radar sensor detects possibility of a frontal collision, the
pre-crash safety systems such as the brakes and seat belts are auto-
matically engaged to lessen impact to occupants as well as vehicle
damage.
Pre-crash seat belts (front seat belts only)
If the pre-crash sensor detects that a collision is unavoidable, the pre-
crash safety system will retract the seat belt before the collision occurs.
The same will happen if the driver makes an emergency braking or
loses control of the vehicle. (P. 1 1 9 )
However, when the VSC system is disabled, the system will not oper-
ate in the event of skidding.
Pre-crash brake assist
When there is a high possibility of a frontal collision, the system applies
greater braking force in relation to how strongly the brake pedal is
depressed.
Pre-crash braking
When there is a high possibility of a frontal collision, the system warns
the driver using a warning light, warning display and buzzer. If the sys-
tem determines that a collision is unavoidable, the brakes are automat-
ically applied to reduce the collision speed. Pre-crash braking can be
disabled using the pre-crash braking off switch.

320
PRIUS +_OM_OM47841E_(EE)
3-1. Using the air conditioning system and defogger
Automatic air conditioning system
Air outlets and fan speed are automatically adjusted according to the
temperature setting.
The illustration is for a left-hand drive vehicles. Some button posi-
tions are reversed for right-hand drive vehicles.
“OFF” button
Fan speed display
Pollen removal mode
Cooling and
dehumidification
function on/off
button
Outside/recirculated
air mode button
Outside
temperature
display
Windshield
defogger
button
Air outlet display Temperature setting display
Automatic mode Function select Adjust/select

321 3-1. Using the air conditioning system and defogger
3
Interior features
PRIUS +_OM_OM47841E_(EE)
Switching functions and changing settings
Slide left and right to
select the function.
The function currently being set
up will be surrounded by a frame.
The arrows displayed at the sides
of the frame indicate the direc-
tions in which the frame can be
moved.
Fan speed
Temperature setting
Air outlet
Turn to adjust/select the setting.
STEP 1
STEP 2

322 3-1. Using the air conditioning system and defogger
PRIUS +_OM_OM47841E_(EE)
Using automatic air conditioning system
Press .
*
The air conditioning system begins to operate. Air outlets and
fan speed are automatically adjusted according to the tem-
perature setting.
To switch the air conditioning (cooler/dehumidifier functions) ON or
OFF, press . (ON and OFF are switched between each time
the button is pressed.)
*: When is pressed, the current temperature setting display
( ) will be automatically selected.
Turn to the clockwise to raise the temperature, or
counterclockwise to lower.
STEP 1
STEP 2

323 3-1. Using the air conditioning system and defogger
3
Interior features
PRIUS +_OM_OM47841E_(EE)
Adjusting the settings manually
Basic setting
Adjusting the fan speed
Slide to the right to select the fan speed display
().
Turn to the clockwise to increase the fan speed, or
counterclockwise to decrease.
The fan speed can be adjusted in 7 stages.
To switch the air conditioning (cooler/dehumidifier functions) ON or
OFF, press . (ON and OFF are switched between each time
the button is pressed.)
To stop the air flow, press .
STEP 1
STEP 2

324 3-1. Using the air conditioning system and defogger
PRIUS +_OM_OM47841E_(EE)Adjusting the temperature setting
Slide to the left or right to select the temperature set-
ting display ( ).
Turn to the clockwise to raise the temperature, or
counterclockwise to lower.
Changing the air outlets
Slide to the left to select the air outlet display
().
Turn clockwise or counterclockwise.
The air flow shown on the display indicates the following:
Air flows to the upper body.
STEP 1
STEP 2
STEP 1
STEP 2