2013 TOYOTA IQ hood release

12
Pictorial indexInstrument panel
Tire pressure warning reset switch P. 221
Hood lock release lever P. 197
Gauges and meters P. 119
Fuel filler door opener P. 56
Multi-information display P. 124

197
4-3. Do-it-yourself maintenance
4
Maintenance and care
Hood
Release the lock from the inside of the vehicle to open the hood.
Pull the hood lock release
lever.
The hood will pop up slightly.
Pull up the hood catch lever
and lift the hood.
Hold the hood open by insert-
ing the supporting rod into the
slot.

310 5-2. Steps to take in an emergency
CAUTION
■To prevent an accident or injury when inspecting under the hood of
your vehicle
● If steam is seen coming from under the hood, do not open the hood until
the steam has subsided. The engine compartment may be very hot, caus-
ing serious injury such as burns.
● Keep hands and clothing away from the fan and other belts while the
engine is running.
● Do not loosen the coolant reservoir cap while the engine and radiator are
hot.
Serious injury, such as burns, may result from hot coolant and steam
released under pressure.
NOTICE
■When adding engine coolant
Wait until the engine has cooled down before adding engine coolant.
When adding coolant, do so slowly. Adding cool coolant to a hot engine too
quickly can cause damage to the engine.

372
GAS STATION INFORMATION
Auxiliary catch leverP. 197Fuel filler doorP. 5 6Hood lock release lever P. 197
Fuel filler door openerP. 5 6Tire inflation pressure
P. 323
Fuel tank capacity
(Reference) 8.5 gal. (32.0 L,
7.0 Imp. gal.)
Fuel type Unleaded gasoline, Octane Rating 87
(Research Octane Number 91) or higher
Cold tire inflation
pressure
P. 3 2 3
Engine oil capacity
(Drain and refill
- reference)qt. (L, Imp. qt.)
With filter 3.7 (3.5, 3.1)
Without filter 3.5 (3.3, 2.9)
Engine oil type Toyota Genuine Motor Oil or equivalent
Oil grade: P. 319
ILSAC multigrade engine oil
Recommended oil viscosity: SAE 0W-20