2013 TOYOTA iQ EV display

2
BASIC OPERATION
SETUP Button
Adjust preferences for general settings,
voice, navigation, vehicle maintenance,
phone, Bluetooth and audio.
ZOOM IN/ZOOM OUT Icons
Touch to magnify or reduce the map
scale.
INFO Button
Access energy monitor, traf c, fuel prices,
sports, stocks, weather, range map and
map data.

MAP/VOICE Button
Repeat the last voice guidance prompt,
cancel the map scrolling feature, or
display the current position. DESTINATION Button
Input the destination by one of several
methods.
CURRENT VEHICLE POSITION Mark
Indicates the current position of the
vehicle and its directional heading.
NORTH-UP OR COMPASS MODE Icon
Touch to change the map display between
North-up or Head-up perspectives.£
Ó
Î
{
x
È
Ç
2
5
6
4
13
7
DEST
INFOSETUP
MAPVOICE

4
CALLING BY VOICE RECOGNITION
After the beep say, “Dial .”
Say the phone number digits
individually, without pausing (e.g. “Dial
Three, one, zero, four…”).step2
step3
Press on the steering wheel. After
the beep say, “Use the Phone.”step1
After the beep, say “Dial” or press
on the steering wheel. Call is active when is
indicated. To end call, press

on the screen or
on the steering
wheel.
step4
Quick Tip - It is recommended that you reduce
background noise prior to using the Voice
Recognition system. Conversation, high fan speed,
wind noise (open windows), etc., may prevent the
voice recognition system from understanding your
commands.
Quick Tip - If you know your next command, you
can press
at any time to interrupt the prompt.
Speak your command after the beep.
Some Bluetooth® equipped cell
phones may or may not show battery or signal strength
on the display. DIAL BY NUMBER
Quick Tip - You can skip Step 1 and say Dial
commands immediately from the Shortcut Menu.

6
DESTINATION INPUT
BY ADDRESS
Press
DEST on the faceplate followed
by
. Touch
and move to
step 4. To change State/Province, touch
and move to step 3.
Input the city name.
Touch the desired city name. Input the street name and touch
.
Select the desired State/Province.
step1step2
step3step4
step5step6
Quick Tip - Enter the street name without pre xes
such as North or the letter N. The system will display
the base street name without pre xes or suf xes on
the next screen.

14
SET HOME
Input the street name and touch
.
Con rm location and touch
.
Touch followed by the
desired icon for your home. Touch
.
step8
step9
step11step12
Touch the desired city name. step7
Touch the desired street name. Input the house number and touch . step10
Quick Tip - Enter the street name without pre xes
such as North or the letter N. The system will display
the base street name without pre xes or suf xes on
the next screen.

15
ADDITIONAL NAVIGATION FEATURES
Once the address has been inputted, select the desired
route preference(s) for the trip. When the yellow bar
appears, the preference has been selected. For example,
if Toll Roads is not selected, the system will route over
non-toll roads which may take longer to reach the
destination.ROUTE PREFERENCES
PRESS
MAPVOICE >
Select what information to display with the map. Some
selections are available during route guidance mode only.
3 ROUTES
SCREEN CONFIGURATIONS One of three routes may be chosen for the trip:
Preferred- is the easiest route, usually the fastest
Alternate- is the second fastest route
Short- is the most direct based upon driven mileage
SEARCH AREA
Prior to inputting the desired address select the State/
Province by pressing . The system
is only capable of searching for an address within one
state or province at a time.
OPERATION OF EMERGENCY SCREEN
PRESS DEST>
Touch the desired emergency category. If the vehicle is in
motion, only nearby police stations, dealers, hospitals or
re stations are shown.

16
SYSTEM TIME
PRESS
SETUP >
Adjust Time Zone, Daylight Saving and Auto Adjust Clock.
Touch
.
ADDITIONAL NAVIGATION FEATURES
LANGUAGE
PRESS
SETUP >
Select Language Preference: English, French or Spanish.
Touch
. PRESS
SETUP >
Adjust the Voice Guidance volume level. Touch
.
BEEP SETTING
VOICE VOLUME
AUTO SCREEN CHANGE
PRESS
SETUP > >
Once the screen transition is switched off, the audio
screen will remain without reverting to the map display.
Touch
.
PRESS
SETUP >
Turn the Beep sound On or Off. Touch .
ESTIMATED DISTANCE AND TIME
The system can be customized to match your driving
habits. Adjust the speed settings. Touch
. Please
refer to the Navigation Owner's manual for a complete
description of this feature. PRESS
SETUP > >
>

17NavTraf c integrates with your navigation system to display continuously updated traf c
information for over 100 markets.

For more information, see www.siriusxm.com/navtraf c
NAVTRAFFIC
Route guidance with ow information and traf c events,
such as accidents and disabled vehicles
Traf c events - road construction
Press
MAPVOICE on the faceplate followed
by
.
step1step2Touch . When the
yellow bar appears, the preference has
been selected. Touch
, traf c ow
is displayed by colored lines alongside
freeway or highways:
SHOW NAVTRAFFIC INFORMATION
Free ow traf c
Moderate traf c
Heavy congestion
New Scion iQ EV owners with factory-installed navigation receive a 90-day complimentary trial
subscription to NavTraf c, NavWeather, Sports, Stocks and Fuel from SiriusXM.

18
Press SETUP on the faceplate followed
by
. step1step2Touch to display Traffi c Incident
Warning option on page 2. Select
to receive voice noti cation of
traf c events within 20 miles along the
current route. Touch
followed
by .
TRAFFIC INCIDENT WARNING Press
SETUP on the faceplate followed
by
. step1step2Touch .
AUTOMATICALLY AVOID TRAFFIC
step3
Select from the Avoid Traffi
c
option. Touch followed by . The system will automatically
select another route when moderate or
heavy traf c is detected during route
guidance.
NAVTRAFFIC