2013 TOYOTA HILUX engine

265
3-1. Using the air conditioning system and defogger
3
Interior features
HILUX_OM_OM0K134E_(EE)
Power heater
: If equipped
Power heater can be operated when
The engine is running.
This feature is used to keep the cabin warm in cold conditions.
Turns the power heater on/off
If you do not turn the switch to
off, the engine speed is
increased whenever the
engine is started.

267 3-1. Using the air conditioning system and defogger
3
Interior features
HILUX_OM_OM0K134E_(EE)
The defoggers can be operated when
The engine switch is in the “ON” position.
The outside rear view mirror defoggers
Turning the rear window defogger on will turn the outside rear view mirror
defoggers on.
CAUTION
When the outside rear view mirror defoggers are on
Do not touch the outside surface of the rear view mirrors, as they can
become very hot and burn you.

269 3-2. Using the audio system
3
Interior features
HILUX_OM_OM0K134E_(EE)
Using cellular phones
Interference may be heard through the audio system’s speakers if a cellular
phone is being used inside or close to the vehicle while the audio system is
operating.
CAUTION
Certification for the disc player
This product is a class 1 laser product.
A laser beam leak may result in hazardous radiation exposure.
Do not open the cover of the player or attempt to repair the unit yourself.
Refer servicing to qualified personnel.
NOTICE
To prevent battery discharge
Do not leave the audio system on longer than necessary with the engine off.
To avoid damaging the audio system
Take care not to spill drinks or other fluids over the audio system.

330 3-3. Using the “touch screen”
HILUX_OM_OM0K134E_(EE)
CAUTION
Laser product
This product is a class 1 laser product.
A laser beam leak may result in hazardous radiation exposure.
Do not open the cover of the player or attempt to repair the unit yourself.
Refer servicing to qualified personal.
Laser power: No hazardous.
NOTICE
To prevent battery discharge
Do not leave the audio system on longer than necessary when the engine is
off.
To avoid damaging the audio system
Take care not to spill drinks or other fluids on the audio system.

376 3-3. Using the “touch screen”
HILUX_OM_OM0K134E_(EE)
Connecting the Bluetooth® audio player
There are two connection methods available.
When the connection method is set to “From vehicle”
When the portable audio player is on standby for the connection, it
will be automatically connected whenever the engine switch is in
either the “ACC” or “ON” position.
When the connection method is set to “From audio player”
Operate the portable player and connect it to the Bluetooth
® audio
system.
Display the “Bluetooth
* Audio” screen.
Touch “Connect”.
Touch the device to connect.
A message is shown if connection
has been successful.
If connection fails, a message will
be displayed and connection will
be re-attempted.
*: Bluetooth is a registered trademark of Bluetooth SIG. Inc.
STEP1
STEP2
STEP3

382 3-3. Using the “touch screen”
HILUX_OM_OM0K134E_(EE)
Compatible models
Portable audio players must correspond to the specifications.
Bluetooth
® specifications:
Ver. 1.1, or higher (Recommended: Ver. 2.1 + EDR or higher)
Profiles:
• A2DP (Advanced Audio Distribution Profile) Ver. 1.0, or higher
(Recommended: Ver. 1.2 or higher)
This is a profile to transmit stereo audio or high quality sounds to the
headphone.
• AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher
(Recommended: Ver. 1.4 or higher)
This is a profile to remote control the A/V equipment.
However, please note that some functions may be limited depending on the
type of portable audio player.
Certification
P. 393
Reconnecting the portable audio player
If the portable audio player is disconnected due to a poor reception when the
engine switch is in the “ACC” or “ON” position, the system automatically
reconnects the portable audio player when possible.
If you have switched off the portable audio player yourself, follow the instruc-
tions below to reconnect:
Select the portable audio player again
Enter the portable audio player
When you release your car
Be sure to initialize your data. (P. 321)

398 3-3. Using the “touch screen”
HILUX_OM_OM0K134E_(EE)
Connecting a Bluetooth® phone
There are two connecting methods available-automatic and manual.
Automatic
When you register your phone, auto connection will be activated.
Always set it to this mode and leave the Bluetooth
® phone in a place
where connection can be established.
When the engine switch is turned to the “ACC” or “ON” position, the
system will search for a nearby cellular phone you have registered.
Next, the system automatically connects with the most recent of the
phones connected to in the past. Then, the connection result is dis-
played.

400 3-3. Using the “touch screen”
HILUX_OM_OM0K134E_(EE)
Making a call
Once the Bluetooth
® phone is registered, you can make a call using
the following procedure:
Dialing
Display the “Telephone” screen. (P. 395)
Input the phone number.
To delete the inputted phone
number, touch
.
For the first digit, you can enter
“+” by touching “
” for a while.
Press on the steering wheel or touch .
Reconnecting to the Bluetooth® phone
If the system cannot connect due to poor signal strength with the engine
switch in the “ACC” or “ON” position, the system will automatically attempt to
reconnect.
If the phone is turned off, the system will not attempt to reconnect. In this
case, connection must be made manually, or the phone must be re-selected.
Connecting the phone while Bluetooth
® audio is playing
Bluetooth
® audio will stop temporarily.
It may take time to connect.
STEP1
STEP2
STEP3