2013 SUZUKI ERTIGA length

Downloaded from www.Manualslib.com manuals search engine 2-23BEFORE DRIVING
60MK0-14E
60A040
To reduce the risk of sliding under the belt
during a collision, position the lap portion
of the belt across your lap as low on your
hips as possible and adjust it to a snug fit
by pulling the shoulder portion of the belt
upward through the latch plate. The length
of the diagonal shoulder strap adjusts itself
to allow freedom of movement.
All Seat Belts Except Center of 2nd
Row Seat
60A036
To fasten the seat belt, sit up straight and
well back in the seat, pull the latch plate
attached to the seat belt across your body
and press it straight into the buckle until
you hear a “click”.
60A039
To unfasten the seat belt, push the button
on the buckle and retract the belt slowly
while attaching a hand to the belt or/and
the latch plate.
Low on hips

Downloaded from www.Manualslib.com manuals search engine 2-24
BEFORE DRIVING
60MK0-14E
Center Seat Belt of 2nd Row SeatLap belt
60MH021
Sit up straight and well back in the seat. To
fasten the belt, pull the latch plate attached
to the seat belt across your hips and press
it straight into the buckle until you hear a
“click”. To reduce the risk of sliding under
the belt during a collision, position the belt
across your lap as low on your hips as pos-
sible and adjust it to a snug fit.
To tighten the belt, pull the free end of the
belt across alongside the lap strap.
60MH022
To lengthen, release the latch plate from
the buckle, pull the latch plate (adjuster) in
the direction of the arrow. The latch plate
should then be refitted into the buckle and
the belt tightened as previously described.
80J2008
NOTE:
The word “CENTER” is marked into the
buckle for the rear center belt. The buckles
are designed so a latch plate cannot be
inserted into the wrong buckle.
TO TIGHTENLow on hips
TO LOOSEN
EXAMPLE

Downloaded from www.Manualslib.com manuals search engine 2-29BEFORE DRIVING
60MK0-14E
Installation with Lap-Shoulder Seat
BeltsELR type belt
80JC021
Install your child restraint system accord-
ing to the instructions provided by the child
restraint system manufacturer.
Make sure that the seat belt is securely
latched.
Try to move the child restraint system in all
directions to make sure it is securely
installed.Installation with a Lap Belt
60G132
Install your child restraint system accord-
ing to the instructions provided by the child
restraint system manufacturer.
To lengthen or tighten the belt, refer to the
“Lap-belt” item in this “Seat Belts and
Child Restraint Systems” section. After
making sure that the seat belt is securely
latched, try moving the child restraint sys-
tem in all directions, to make sure it is
securely installed. If you need to tighten
the belt, pull the free end of the webbing.
WARNING
Children could be endangered in a
crash if their child restraint systems
are not properly secured in the vehi-
cle. When installing a child restraint
system, be sure to follow the instruc-
tions below. Be sure to secure the
child in the restraint system accord-
ing to the manufacturer’s instruc-
tions.
WARNING
In an accident or sudden stop, the
rear seat armrest (if equipped) could
fall forward. If there is a child in a
rear-facing child restraint in the cen-
ter seating position, the falling arm-
rest could injure the child. Make sure
the armrest is back in the seat when
not in use.
NOTICE
Before installing a child restraint sys-
tem in the rear seat, raise the head
restraint (if equipped) to the most
upper position.
EXAMPLE
EXAMPLE
Pull to tighten

Downloaded from www.Manualslib.com manuals search engine 11-1
SPECIFICATIONS
60MK0-14E
11
SPECIFICATIONSNOTE:
Specifications are subject to change with-
out notice.M/T: Manual transaxle
A/T: Automatic transaxle
ITEM: DimensionsUNIT: mm (in.)
Overall length4265 (167.9)
Overall width1695 (66.7)
Overall height1685 (66.3)
Wheelbase2740 (107.9)
Track Front 1480 (58.3)
Rear 1490 (58.7)
Ground clearance185 (7.3)
ITEM: Mass (weight)UNIT: kg (lbs)
Curb mass (weight) 1160 - 1180 (2557 - 2601)
Gross vehicle mass (weight) rating 1760 (3880)
Gross axle mass (weight) rating Front 800 (1764)
Rear 960 (2116)