7-28
INSPECTION AND MAINTENANCE
53MH0-74E
Side Turn Signal Light
53M-09-050
Pull down the lens by using a flat blade
screwdriver covered with a soft cloth as
shown. The bulb can be removed by sim-
ply pulling it out. Then remove the bulb.
Install a new bulb in the reverse order.
Other General Lights
Bulb holder
53M-09-051
(1) Removal
(2) Installation
To remove a bulb holder from a light hous-
ing, turn the holder counterclockwise and
pull it out. To install the holder, push the
holder in and turn it clockwise.
Bulb
53M-09-052
(3) Removal
(4) Installation
There are two types of bulb, “Full glass
type” (1) and “Glass/metal type” (2).
To remove and install a full glass type bulb
(1), simply pull out or push in the bulb.
To remove a glass metal type bulb (2) from
a bulb holder, push in the bulb and turn it
counterclockwise. To install a new bulb,
push it in and turn it clockwise.
You can access the individual bulb or bulb
holders as follows.
Front turn signal light (1)
Front position light (2)
ALTO 800
53MM07001
ALTO K10
53M-09-054
EXAMPLE
EXAMPLE
EXAMPLE(1) (2)
EXAMPLE
EXAMPLE
11-3
SPECIFICATIONS
53MH0-74E
ITEM: Lights
ALTO 800 ALTO K10
WATTAGE BULB No. WATTAGE BULB No.
Headlight 12V 60/55W H4 12V 60/55W
H4
Turn signal lightFront 12V 21W P21W 12V 21W PY21W
Rear 12V 21W PY21W 12V 21W PY21W
Side turn signal light 12V 5W W5W 12V 5W W5W
Position light 12V 5W W5W 12V 5W W5W
Brake/tail light 12V 21/5W P21/5W 12V 21/5W P21/5W
License plate light 12V 5W W5W 12V 5W W5W
Reversing light 12V 21W P21W 12V 21W P21W
Interior light 12V 8W – 12V 8W –
High mount stop light 12V 16W W16W 12V 16W W16W
