2013 SUZUKI ALTO audio

OTHER CONTROLS AND EQUIPMENT
5
53MH0-74E
OTHER CONTROLS AND EQUIPMENT
Manual Heating and Air Conditioning System
(if equipped) ......................................................................... 5-1
Fuel Filler Cap ..................................................................... 5-6
Engine Hood ........................................................................ 5-7
Sun Visor ............................................................................. 5-8
Interior Light Switch ........................................................... 5-8
Accessory Socket (if equipped) ......................................... 5-9
Assist Grips (if equipped) .................................................. 5-9
Glove Box ............................................................................ 5-10
Cup Holder and Storage Area ............................................ 5-10
Floor Mats ............................................................................ 5-10
Shopping Hook (if equipped) ............................................. 5-11
Luggage Compartment Cover (if equipped) ..................... 5-11
Frame Hooks ....................................................................... 5-12
Front Speaker Provision ..................................................... 5-12
Audio System (if equipped) ................................................ 5-13

5-13
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
Audio System (if equipped)
ALTO 800
Refer supplementary manual for audio
system (if equipped), provided along with
the vehicle.
ALTO K10
53M-07-047
Notes on Discs
Precautions
When the inside of the vehicle is very
cold and the player is used soon after
switching on the heater, condensation
may form on the disc or the optical parts
of the player and proper playback may
not be possible. If condensation forms
on the disc, wipe it off with a soft cloth. If
condensation forms on the optical parts
of the player, do not use the player forabout one hour. This will allow the con-
densation to disappear normally.
Driving on extremely bumpy roads which
cause severe vibrations may cause
sound to skip.
This unit uses a precision mechanism.
Even in the event that trouble arises,
never open the case, disassemble the
unit, or lubricate the rotating parts.
Please bring the unit to an authorized
MARUTI SUZUKI dealer.
Cautions on Handling
53M-07-048
This unit has been designed specifically for
playback of compact discs bearing mark
(A) shown above.
53M-07-049
To remove the compact disc from its stor-
age case, press down on the center of the
EXAMPLE
If you pay extended attention to oper-
ating the audio system or viewing the
audio system display while driving,
an accident can occur. If you set the
sound volume too loud, it could pre-
vent you from being aware of road
and traffic conditions.
• Keep your eyes on the road and
your mind on the drive. Avoid pay-
ing extended attention to operating
the audio system or viewing the
audio system display.
• Familiarize yourself with the audio
system controls and operation of
the audio system before driving.
• Preset your favorite radio stations
before driving so that you can
quickly tune to them using the pre-
sets.
• Set the sound volume to a level
that will allow you to continue to be
aware of road and traffic conditions
while driving.

5-27
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
Selecting a USB device mode
Press the Media Source Mode button to
select USB mode (1).
53M-07-075
Selecting a folder
Press the Folder Up button (7) to select
next folder. Press the Folder Down button
(6) select previous folder.
Selecting a track
Press the Up button (9) to listen to the
next track.
Press the Down button (8) twice to listen
to the previous track. When the Down
button (8) is pressed once, the track cur-
rently being played will start from the
beginning again.Fast forwarding/Rewinding a track
Hold down the Up button (9) to fast for-
ward the track.
Hold down the Down button (8) to fast
rewind the track.
If you keep pressing the UP (9)/DOWN
button(8) until the beginning or ending of
the disc, the unit release the fast-for-
ward/rewind operation and plays the first
track.
Scan play
File Scan
Press the SCAN button (2). The first 10
seconds of each file is play in sequence.
Folder Scan
press the SCAN button (2) for 1 second or
longer. The first 10 seconds of the first file
in each folder stored in the USB is played
in sequence.
NOTE:
To cancel the scan play, press the SCAN
button (2) again or eject the USB.
Random playback
Track random
Press the RDM button (4). the random indi-
cator “RDM” will light. The tracks in the
loaded USB device will be played in ran-
dom order.
Folder random
Press the RDM button (4) for 1 second or
longer. The random indicator “RDM and
FOLD.” will light. The tracks in the current
folder will be played in random order.
NOTE:
To cancel random playback, press the
RDM button (4) again or eject the USB.NOTICE
Do not connect any USB device other
than a USB memory or a USB audio
player. Do not connect multiple USB
devices to the USB connector using a
USB hub, etc. Supplying power to
multiple USB devices from the con-
nector could cause overheating and
smoking.

5-28
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
Repeat playback
File repeat
Press the RPT button (3). The repeat indi-
cator “RPT” will light. The track currently
being played will be played repeatedly.
Folder Repeat
press the RPT button (3) for 1 second or
longer. The repeat indicator “RPT and
FOLD.” will light. All tracks in the currently
selected folder will be played repeatedly.
NOTE:
To cancel the repeat playback, press the
RPT button (3) again or eject the USB.
Display change
Press the DISP button (7).
Each time the button is pressed, display
will change as follows:
53M-07-076
Press the DISP (6) for 1 second or lon-
ger.
Each time this button is pressed, the dis-
play switches as follows. First 8 character
next 8 characters.
A total of 16 characters can be dis-
played.
If the number of character is 8or less, dis-
play doesn’t switch. If the ID3 tag/tag info is
not available on the track, “NO TITLE” will
be displayed.
Notes on USB device
Compatible USB devices
USB Mass Storage Class
For details as to whether your USB
memory/USB Audio is compatible with
USB Mass Storage Class, please con-
tact the USB memory/USB Audio manu-
facturer.
USB Standard Compatibility 1.1/2.0 Full
Speed
File System FAT16/32
Maximum current less than 1 A
Capacity less than 32 GB (1 partition)

5-29
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
USB device connection
When connecting a USB device, make
sure that the connector is pushed all the
way into the port.
Do not leave the USB device for long
periods of time in places inside the vehi-
cle where the temperature can rise too
high.
Back up any important data beforehand.
We cannot accept responsibility for any
lost data.
It is recommended not to connect a USB
device that contains data files other than
MP3/WMA/AAC format.
We recommend against use of USB
devices that are non-standard shape
such as key chains, mobile phone
accessories, etc. which may damage or
stress the connection between USB
device and Socket terminal.
Always close the USB socket terminal
when not in use, since entry of foreignmaterial, dust, water, conductive liquids
may damage the audio system or USB
device.
Device such as MP3 player/Mobile
phone/digital camera may not be rec-
ognized by the audio system for playing
music.
Recording MP3/WMA/AAC
files on a USB device
Playback or display may not be possible
depending on the type of USB device in
use or the condition of the recording.
Depending on the connected USB mem-
ory, the files may be played in different
order from the order that the files were
stored.
During initialization, the reading time of
USB device may vary depending upon
factors such as file structure, size and
contents other than music files.
When files recorded contains VBR (vari-
able bit rate), during playback, fast-for-
ward or reverse operation are done.
The sound quality of MP3/WMA/AAC
files generally improves with higher bit
rate in order to achieve good sound qual-
ity recording with CBR 9continuous bit
rate) of at least 128kbps is recom-
mended.
Compression formatsMP3
MPEG 1,2 and 2.5 layer III
Bit rate
:– MPEG-1: 32, 44.1, 48 kHz
– MPEG-2: 16, 22.05, 24 kHz
– MPEG-2.5: 8, 12 kHz
– VBR
Sampling frequency:– MPEG-1: 32, 44.1, 48 kHz
– MPEG-2: 16, 22.05, 24 kHz
– MPEG-2.5: 8, 12 kHz
WMA
Supports only v7/8/9, DRM/Professional/
Loseless/Voice are not supported
Bit rate:48, 64, 80, 96, 128, 160, 192
kbps
Sampling frequency:8, 16, 22.05, 32,
44.1 kHz
AAC
MPEG AAC (Compliant with ISO/
IEC14496-12:2003 + iTunes Meta-data
Specification)
Bit rate: up to 320kbps
Sampling frequency:8/11.025/12/16/
22.05/24/32/44.1/48 kHz
Sampling frequency:8/11.025/12/16/
22.05/24/32/44.1/48 kHz
Maximum number of files/folders
Maximum number of files: 65280 (files +
folders)
Maximum number of files in a folder: 256
Maximum depth of tree structure: 8
Maximum number of folders: 255
(Root folder is included.)

5-34
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
AUX Function
53M-07-082
EXAMPLE
AUX connection
To listen to auxiliary audio sources (sold
separately) through the unit, follow the
instruction below. 1) Press the Media
Source Mode button (1). 2) Connect the
auxiliary audio source to the AUX socket
with an AUX cable.
NOTE
• Please consult your place of purchase
for details about whether a given auxil-
iary audio source can be connected and
the proper auxiliary cord to use.
• The volume and tone controls of the
auxiliary audio source can be adjusted
on the unit.
CAUTION
• Before connection, set the volume
for the unit to 0 (When AUX mode is
selected) and also keep the volume
of the auxiliary audio source within a
range that will not cause distortion.
• When the audio source is turned
off, noise may be emitted. Be sure
to turn off the unit or switch to
another mode before turning off the
audio source

5-35
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
Troubleshooting
FM/AM
SYMPTOM CAUSEREMEDY
The station cannot be received.The connection of the car antenna has
not been made correctly.Check the connection of the car antenna.
Automatic tuning is not possible.The broadcast signal is too weak. Perform manual setting.
The radio sensitivity is poor.Car antenna is not extended fully or
inclining.Check the car antenna.
No sound is coming out from front
speaker or rear speaker.Adjustment of the front and rear speakers
tilts towards either of the side.According to “Adjusting the audio”, adjust
the FAD level.
For the 2 speakers, adjust the FAD level
to “0”.

5-36
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
Troubleshooting
USB
SYMPTOM CAUSEREMEDY
NO DeviceUSB device is not connectedConnect USB memory device properly.
Also check if USB connector area is
clean.
No FileThere is no playable music filesCheck data stored in USB memory
device is in supported format
Unsupported (Check 04)The USB device is not supportedCheck if data stored in USB memory
device is in supported format
Read Error (Check 04)Cannot read the file which is trying to play
by some reason. (File system, Com-
pressed setting, data format, file name
expanding, data damaged, file recorded
by others may not be supported.)Check USB memory device if connected
properly. If it's not connected properly,
reconnect, and select the file which
player is able to read and check the data
stored in USB memory. You must format
the USB memory if necessary.
Operation ErrorCannot be controlled by some reason.Switch POWER or ACC ON/OFF. If still
not recovered, remove the USB memory
device and reconnect.
Over Current (Check 05)The USB device is over the current.Use other USB memory device whose
current consumption is 1A or below. Also
check if USB connector area is clean.
Audio will be muted and skip to next
track.The file is protected with copyright
(DRM).The file protected with copyright cannot
be played. Select the playable file.