2013 SUBARU TRIBECA lock

[x] Cancel search: lock

Page 122 of 420

SUBARU TRIBECA 2013 1.G Owners Manual mode. 
To exit valet mode, change the setting of 
your vehicle’s alarm system for activation
mode. Refer to “Activating and deactivat-
ing the alarm system ”F 2-16.
& Passive arming
When passive

Page 124 of 420

SUBARU TRIBECA 2013 1.G Owners Manual Child safety locks
WARNING
Always use the child safety lock 
whenever a child rides in the rear.
Serious injury could result if a child
accidentally opened the door and
fell out.
Each rear door has a

Page 126 of 420

SUBARU TRIBECA 2013 1.G Owners Manual To close: 
Pull the switch up and hold it until the 
window reaches the desired position.! Locking the passengers ’win-
dows
Push the lock switch. When the lock 
switch is in the “LOCK ”position

Page 127 of 420

SUBARU TRIBECA 2013 1.G Owners Manual 2-24Keys and doors/Rear gate
Rear gate
The rear gate can be locked and unlocked 
using any of the following systems. .Power door locking switch: Refer to
“ Power door locking switches ”F 2-7.
. Re

Page 128 of 420

SUBARU TRIBECA 2013 1.G Owners Manual NOTE 
If the rear gate cannot be unlocked due 
to a discharged vehicle battery, a
malfunction in the door locking/unlock-
ing system or other causes, you can
unlock it by manually operating the
rear g

Page 132 of 420

SUBARU TRIBECA 2013 1.G Owners Manual Ignition switch..................................................... 3-3
LOCK .................................................................. 3-3
Acc................................................

Page 134 of 420

SUBARU TRIBECA 2013 1.G Owners Manual Ignition switch
WARNING
. Never turn the ignition switch to
“ LOCK ”while the vehicle is
being driven or towed because 
that will lock the steering wheel,
preventing steering control. And
when the

Page 135 of 420

SUBARU TRIBECA 2013 1.G Owners Manual 3-4Instruments and controls/Ignition switch
&Acc
In this position the electrical accessories 
(radio, accessory power outlet, etc.) can
be used. & ON
This is the normal operating position after 
the e