0000-00
Specified
valueover 11V: Normal
9 ~ 11V: Charging required
below: 9V: Over discharged,
battery replacement required
7. INSPECTION - BATTERY
Perform the basic inspection (all electric devices OFF). -
Battery tester
1) Voltage Check (without load)
terminal of battery first, then connect the
clamps in the reverse order). 1.
Read the measurement. 2.
8710-01
4) REKES Key Configuration
Battery cover Side cover Battery (CR2032)
TransponderKey plate
Remote controller PCB
Battery replacement
Remove the battery cover with a flat-bladed screwdriver to replace the battery.
Transponder replacement
Remove the battery cover to remove the battery.
Remove the key plate after removing the rubber cover and screws.
Remove the side cover and main cover.
Replace the transponder -
-
-
-Main cover
Spring
