2013 SMART FORTWO COUPE roof

[x] Cancel search: roof

Page 11 of 218

SMART FORTWO COUPE 2013  Owners Manual Problems with your vehicle
..............17
Product information .......................12
Production options weight ..............139
PSI (air pressure unit) ...................139 R
Radio ...........

Page 13 of 218

SMART FORTWO COUPE 2013  Owners Manual Wheel change
........................... 188
Winte rtires ...................... 140, 210
Tire speed rating ....................135, 139
Top tether see Children in the vehicle
Total load limit .......

Page 38 of 218

SMART FORTWO COUPE 2013  Owners Manual 0002
Head-thorax air bag
Window curtain air bags and thorax-
pelvis side air bags (coupé only) G
WARNING
There is a possibility for a thorax-pelvis
side air bag related injury if occupants,
especiall

Page 71 of 218

SMART FORTWO COUPE 2013  Owners Manual When loading, make sure no sharp objects
come into contact with the soft top or the
rear window.
Do not place any evenly distributed loads
with a weight of more than 165 lbs (75 kg)
on the rear soft t

Page 103 of 218

SMART FORTWO COUPE 2013  Owners Manual Fitting
If you wish to use cargo compartment cover
blind 0002as normal, assemble it in top
mountings 0003. If you do not need the cargo
compartment cover blind, insert in bottom
mountings 002B.
X Open

Page 106 of 218

SMART FORTWO COUPE 2013  Owners Manual X
Opening: Press on the center of
drawer 0002.
The drawer opens slightly.
X Pull drawer0002 to open completely.
X Closing: Press on drawer 0002until it
engages.
Storage compartment in the tailgate
(co

Page 107 of 218

SMART FORTWO COUPE 2013  Owners Manual G
WARNING
Do not store any flammable substances
inside the vehicle that could ignite and
start a fire. G
WARNING
The manufacturer has not approved your
vehicle for towing a trailer. A trailer can
perm

Page 114 of 218

SMART FORTWO COUPE 2013  Owners Manual Carry out the following steps within
30 seconds:
X If the value of the charg ecurrent is not
set to 8 A: set the value to 8 Aand confirm.
X Set the value of the charge current to
10 A and confirm.
X S
Page:   1-8 9-16 next >