2013 SMART FORTWO COUPE Setting the

C
CAC (Customer Assistance Center) ......17
California retail buyers and
lessees, important notice for ...........13
Cargo compartment cover blind ........100
CD player ...................................... 91
Center console .............................. 25
Central locking Automati c................................ 51
Locking/unlocking from inside ....51
Certification label .......................208
Charge level gauge ......................... 79
Charging High-voltage battery ................108
Charging cable
Connecting .............................. 114
Control element ....................... 113
Storing .................................. 112
Children in the vehicle ...................40
Air bags .................................. 31
Indicator lamp, passenger front
air bag off ......................... 39, 168
Infant and child restraint
systems ................................... 41
OCS (Occupant Classification
System) ....................................37
Safety notes ............................. 40
Tether anchorage points .............43
Child safety
see Children in the vehicle
Cockpit ........................................ 20
Coin holder ................................. 102
Cold tire inflation pressure ...........138
Combination switch ........................64
Control system Charge and depart menu ..............86
Charging mode display ...............83
Contro llever ............................ 81
Introduction ............................. 81
Menus and submenu s................... 85
Message smenu .......................... 89
Multifunction display ................81
Odomete rmenu .......................... 85
Reset menu ............................... 86
Setting smenu ........................... 89Start menu
............................... 86
Time menu ............................... 90
Coolant
Anticorrosion/antifreeze .....213, 214
Battery ................................... 119
Capacities ........................ 212, 213
Drive system ........................... .119
Temperature warning lamp .........165
Coolant temperature ......................146
Cruise control ............................... 93
Curb weight ................................. 138
Customer Assistance Center (CAC) ......17 D
Dashboard see Instrument cluster
Data recording .............................. 18
Daytime running lamp mode ..............63
Deep water see Standing water
Defroster
Rear window ............................. 99
Windshield .............................. 99
Department of Transportation
see DOT
Direction of rotation (tires) ...........131
Door control panel ......................... 26
Door handles ................................. 26
Doors Locking/unlocking from outside ...51
Opening from inside ..................52
DOT (Department of
Transportation) ...................... 136, 138
Drinking and driving .....................141
Drive diagnostics Indicator lamp ........................ 166
Warnin glamp .......................... 166
Driving
Abroad ................................... 146
Coolant temperature .................146
Hydroplaning .......................... 144
Instructions ....................... 74, 141
In winter ................................ 145
Safety systems .......................... 44
Through standing water .............145
Tips, transmissio n.................... 78 Index
5

Problems with your vehicle
..............17
Product information .......................12
Production options weight ..............139
PSI (air pressure unit) ...................139 R
Radio .......................................... .91
Radio transmitters ........................ 146
Rain-light sensor .......................... 67
READY indicator ............................ 82
Rear lamps Overview ................................ 174
Rear window defroster .....................99
Rear window wiper/washer ...............68
Replacing wiper blade ..............178
Recommended tire inflation
pressure ................................ 122, 139
Remote control see Key
Replacing bulbs ............................ 172
Reporting safety defects ..................17
Restraint systems see Occupant safety
Rims ..................................... 139, 210
Roadside Assistance .......................14
Roof see Soft top system S
Safety Driving safety systems ...............44
Occupant safety ......................... 28
Reporting defects ......................17
Safety belts
see Seat belts
Saving energy .............................. 143
Seat belt force limiter ....................31
Seat belts ..................................... 29
Children in the vehicle ..............40
Fastening ................................ 60
Proper use of ............................ 29
Safety guidelines ......................33
Safet ynotes ............................. 29
Telltale .................................. 161
Seat heating ................................. 58
Seating capacity ........................... 128 Seats
........................................... 56
Adjustment ............................... 56
Armrest ................................... 57
Heating ................................... 58
Passenger seat .......................... 57
Self-test
OCS (Occupant Classification
System) ................................... 40
SRS ......................................... 28
Service
see Maintenance
Service, parts .............................. 206
Service and warranty Booklet .................................. 206
Service flap ................................. 117
Service life (tires) .......................131
Setting the departur etime (Control
system) ........................................ 86
Setting the maximum charge current
(Control system) ............................. 88
Side marker lamps ......................... 173
Sidewall (tires) ............................ 139
Side windows Operatio n................................ 73
Signs and labels ........................... 208
smart surround sound system ............93
Snow chains ................................. 140
Snow tires see Winte rtires
Soft top system .............................. 68
Cleaning the soft top fabric .......151
Locking rear soft top manually ....171
Mounting the side rails ..............72
Opening and closing the rear
soft top ............................... 54, 70
Opening and closing the
retractable soft top ...............53, 69
Removing the side rails ..............71
Storing the side rails ................72
Sound package ............................... 93
SRS (Supplemental Restraint
System)
Indicator lamp ........................ 162
Standing water, driving through ......145
Starter switch positions .................. 55
Starting the engine ........................74
Steering wheel paddle shifters .........77 Index
9

good view of the road and traffic
conditions.
Exterior rear view mirrors
G
WARNING
Exercise care when using the passenger-
side exterior rear view mirror. The mirror
surface is convex (outwardly curved surface
for a wider field of view). Objects in mirror
are closer than they appear. Check your
interior rear view mirror and glance over
your shoulder to determine whether any
vehicles are in the ’blind spot’ of your field
of vision, before changing lanes.
Power exterior rear view mirrors The operating control is on the door
control panel.
X
Make sure the key is in starter switch
position 1.
X Selecting the mirror: Turn knob0002to the
left for the driver’s side exterior rear
view mirror or to the right for the
passenger side exterior rear view
mirror.
X Adjusting the mirror: Move adjustment
button 0003up, down, left, or right to the
desired setting.
Exterior rear view mirror heating After switching on the rear window
defroster, the exterior rear view mirrors will be heated automatically. This
prevents icing up the exterior rear view
mirrors and also creates a clear view when
the exterior rear view mirrors have fogged
up.
If the rear window defroster is
automatically deactivated after
approximately 10 minutes of operation, the
exterior rear view mirror heating also
deactivates.
X
Make sure the key is in starter switch
position 1.
X Switching on: Switch on the rear window
defroster (Y page 99).
The exterior rear view mirror heating is
switched on.
X Switching off: Switch off the rear window
defroster (Y page 99).
The exterior rear view mirror heating is
switched off.
i The exterior rear view mirror heating
also switches off if the key is turned to
starter switch position 0. Interior rear view mirror
X
Adjusting the mirror: Manually move the
interior rear view mirror up, down, left,
or right to the desired setting.
X Selecting the antiglare position: Tilt
the interior rear view mirror to the
antiglare position by moving lever 0002
forward or backward. Mirrors
59>> Controls. Z

When returning to the vehicle
X
Press button 0006on the key either once or
twice.
The vehicle is either selectively or
globally unlocked.
The interior lamps come on and then go
out again after 12 seconds. Ambient lighting*
The ambient lighting illuminates the
vehicle interior with 6 LEDs when the low-
beam headlamps are switched on. The LEDs
can be dimmed.
The LEDS are located
R in the overhead control panel
R in the door pockets, driver’s and
passenger side
R in the storage trays to the left and right
of the steering wheel
In addition to the ambient lighting, the
footwells on the driver’s and passenger
side are also illuminated by separate
lamps.
i When you open a door, the interior
lighting comes on and the brightness of
lamps in the footwells increases. X
Make sure the key is in starter switch
position 1.
X Switch on the parking lamps.
X To brighten or dim ambient lighting:
Press button 0002on the instrument cluster repeatedly until the desired setting is
reached.
The current setting is stored.
i When adjusting the ambient lighting,
the illumination level for instrument
cluster is also changed (Y page 80). Front fog lamps
G
WARNING
Vehicles with rain-light sensor*:
In low ambient lighting or foggy
conditions, only switch from position
0002 to0002 with the vehicle at a
standstill in a safe location. Switching
from 0002 to0002 will briefly switch off
the headlamps. Doing so while driving in
low ambient lighting conditions may result
in an accident.
i Fog lamps will operat ewith the parking
lamps and/or the low‑beam headlamps on.
Fog lamps should only be used in
conjunction with low‑beam headlamps.
Consult your State or Province Motor
Vehicle Regulation sregarding
permissible lamp operation.
i Vehicle with rain-light sensor*:
Fog lamps cannot be switched on manually
with the exterior lamp switch in
position 0002. To switch on the fog
lamps, turn the exterior lamp switch to
position 0002first. Lighting
65>> Controls.
* optional Z

Windshield wipers
Switching windshiel
dwipers on and off Example illustration coupé
X
Make sure the key is in starter switch
position 1.
X Switching on: Turn the wiper switch to
position 0005or0006, depending on the
intensity of the rain.
! Do not operate the windshield wipers
when the windshield is dry. Dust that
accumulates on a windshield might
scratch the glass and/or damage the
wiper blades when wiping occurs on a dry
windshield. If it is necessary to operate
the windshield wipers in dry weather
conditions, always operate the
windshield wipers with windshield
washer fluid.
! If anything blocks the windshield
wipers (leaves, snow, etc.), switch them
off immediately.
For safety reasons, stop the vehicle in a
safe location and
R -
remove the key from the starter
switch
- engage the parking brake
before attempting to remove any
blockage.
R Remove blockage.
R Turn the windshield wipers on again.
X Switching off: Turn the wiper switch to
position 0008. Intermittent wiping
Only switch on intermittent wiping under
wet weather conditions or in the presence
of precipitation.
Vehicle swith rain-ligh tsensor*: When you
select intermittent wiping, the sensor is
activated. The sensor automatically sets a
suitablew iping interval depending on the
wetness of the sensor surface.
! Vehicles with rain-light sensor*:
Do not leave windshield wipers in
intermittent setting when the vehicle is
taken to an automatic car wash or during
windshield cleaning. Windshield wipers
will operate in the presence of water
sprayed on the windshield, and
windshield wipers may be damaged as a
result.
! Vehicles with rain-light sensor*:
If you have set intermittent wiping, dirt
on the surface of the sensor or optical
effects may cause the windshield wipers
to wipe in an undesired fashion. This
could then damage the windshield wiper
blades or scratch the windshield. You
should therefore switch off the
windshield wipers when weather
conditions are dry.
X Make sure the key is in starter switch
position 1.
X Activating intermittent wiping: Turn the
wiper switch to position 0004.
After the initial wipe, pauses between
wipes are automatically controlled
depending on the vehicle speed and by the
rain-light sensor*.
X Deactivating intermittent wiping: Turn
the wiper switch to position 0008. Windshield wipers
67>> Controls.
* optional Z

Compensate for the reduced engine braking
effect by pressing the brake pedal
accordingly, as required.
Using the steering wheel paddle shifters,
you can increase or decrease the
recuperation in overrun phases.
Recuperation means that energy is
recovered while driving - the electric
motor functions as a generator. The kinetic
energy of the vehicle is converted into
electric power and stored in the high-
voltage battery. The more the recuperation
increases, the more the vehicle will be
decelerated.
In overrun phases, there are three levels of
recuperation:
R no recuperation (level 0, coasting)
R mid-level recuperation (level 1)
R high-level recuperation (level 2)
The amount of recuperation in overrun
mode is displayed in the power gauge
(Y page 79).
When you switch on the ignition, level 1 is
automatically preset. X
Decrease recuperation: Pull left
steering wheel paddle shifter 0002.
X Increase recuperation: Pull right
steering wheel paddle shifter 0003.Use the different levels 0 to 2 for
conditions as described below: Level 0 Driving without frequent
breaking. No sharp bends on
the road ahead.
Maximum kinetic energy
remains for the vehicle.
Level 1 Normal driving, standard
setting.
Level 2 Sporty driving.
The break pedal has to be
depressed less often, as the
deceleration due to
recuperation is higher than
in level 1.
The energy efficiency is
substantially higher than if
the vehicle is decelerated by
depressing the brake pedal.
At levels
1and 2the vehicle can be
steplessly decelerated by depressing the
brake pedal.
i Under certain circumstances, in
overrun phases recuperation does not
work as described above. This may be e. g
the case if the high-voltage battery is
already fully charged or has not reached
operating temperature. Driving tips
Driving on uphill grades G
WARNING
The hill-start assist system is not
designed to function as a parking brake and
does not prevent the vehicle from moving
when parked on an incline.
Always engage the parking brake in
addition to shifting to park position P.78
Transmission>> Controls.

Power gauge
G
WARNING
The operating condition of the high-
voltage battery (e.g. not yet at normal
operating temperature or fully charged)
influences the braking effect of the
electric motor.
In overrun or braking mode, the motor's
braking effect may therefore be reduced or
may not be present at all.
As a result of the reduced engine braking
effect, you may cause an accident and
injure yourself or others.
Compensate for the reduced engine braking
effect by pressing the brake pedal
accordingly, as required.
! Do not hang any objects on the power
gauge.
This could cause the power gauge to be
torn from its mountings and be damaged.
Power gauge 0003contains two segments:
R Section right of 0
Power gauge 0003indicates the current
power that the drive system delivers to
the rear wheels. 100 % correspond to
55 kW peak power.
R Section left of 0
When you release the accelerator pedal
or when you depress the brake pedal, the
electric motor operates as a generator.
Electric current is produced and stored
in the high-voltage battery. As long as
the high-voltage battery is being
charged, the electric motor simulates an
engine brake.
When the pointer of power gauge 0003is in
the "OFF “position, the vehicle is not ready
to drive, because:
R the drive system has not been started
R the gear selector lever has not been
moved to position Nor Pwhen starting
the drive system R
the charging cable is connected to the
vehicle
R there is not enough power from the high-
voltage battery
R a problem occured in the high-voltage
system
After the drive system has been started, the
pointer of power gauge 0003moves to
position 0.READY appears in the
multifunction display (Y page 82). The
vehicle is ready to drive. Adjusting instrument cluster
illumination
You can adjust the illumination of
R the switches and dials in the instrument
cluster
R the radio
R the climate control panel
R the charge level and power gauges
Five illumination levels are available. X
Make sure the key is in starter switch
position 1.
X Switch on the parking lamps.
X To brighten or dim illumination: Press
button 0002on the instrument cluster
repeatedly until the desired setting is
reached.
The current setting is stored. 80
Instrument cluster>> Controls.

Control system
Introduction
The control system is activated when you
turn the key in the starter switch to
position 1. G
WARNING
Ad river’s attention to the road and traffic
conditions must always be his/her primary
focus when driving.
In order to avoid distraction which could
lead to an accident, the driver should
select features and change settings in the
control system only vehicle at a standstill
or when traffic and road conditions permit
it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h ), your vehicle is
covering adistance of 44 feet
(approximately 14 m) every second. Control lever
You can select the displays in the
multifunction display and change settings
in the control system with the control
lever. 0002
Control switch
Pressing up selects a menu.
0003
OK button
Confirming a selection.
Scrolling through stored messages
in the
Messages menu
002B
Control switch
Pressing down selects a menu.
Multifunction display
The multifunction display shows values and
settings as well as display messages.
X Activating the multifunction display:
Unlock the vehicle.
X Confirming messages: Press the OK
button on the control lever briefly
(Y page 81).
X Exiting menu: Press the control switch on
the control lever up or down until the
message Back appears in the
multifunction display.
X Press the OK button on the control lever
briefly. Transmission position indicator
The transmission position indicator
0002
displays the current gear selector lever
position. Display Function
P
Park position
R
Reverse gear Control system
81>> Controls. Z