Counter for distance drivenFig. 6
Segment display / MAXI DOT dis-
play
First read and observe the introductory information and safety warn-
ings on page 11.
Daily trip counter (trip)
The daily trip counter
A
» Fig. 6 shows the distance driven since the time the
counter was last reset - in steps of 100 m.
Reset daily trip counter
›
Briefly press the button
6
» Fig. 2 on page 11.
Odometer
The odometer
B
» Fig. 6 displays the total distance the vehicle has travelled.
First read and observe the introductory information and safety warn-
ings on page 11.
›
Switch on the ignition.
›
Press and hold the button
6
» Fig. 2 on page 11 until the Time is shown in the
display.
›
Release the button
6
, and the system switches to the time setting function.
›
Press the button
6
again and set the hours.
›
Wait around 4 seconds - the system switches to the minutes setting.
›
Press the button
6
again and set the minutes.
The time can also be set in the Infotainment » operating instructions for Infotain-
ment , chapter Device settings .
Viewing the charge level vehicle battery
First read and observe the introductory information and safety warn-ings
on page 11.
›
Switch off the ignition.
›
Press and hold the button
6
» Fig. 2 on page 11 until the Battery status or BAT-
TERY SOC is shown in the display.
›
Release the button
6
- the current charge level of the vehicle battery is dis-
played in %.
Auto-check control
First read and observe the introductory information and safety warn-ings
on page 11.
Certain functions and conditions of individual vehicle systems are checked contin-
uously when the ignition is switched on.
Error messages and/or other information are displayed in the instrument clusterdisplay.
Some messages are displayed simultaneously with the warning lights » page 15
or warning icons in the display » page 21.
While the operational faults remain unrectified, the messages are always indica-
ted again. After they are displayed for the first time, the symbols
or
continue
to be indicated without any extra messages for the driver.
SymbolMeaningWarningDangerWARNINGIf you have to stop for technical reasons, then park the vehicle at a safe dis-
tance from the traffic, switch off the engine and switch on the hazard warning
lights » page 61 . The warning triangle must be set up at the prescribed dis-
tance - observe the national legal provisions when doing so.
14Using the system
