2013 Seat Altea Freetrack jack points

223
Checking and refilling levels
WARNING (Continued)
● Never touch the radiator fan. It is temperature controlled and could
start automatically, even when the engine has been switched off and the
key removed from the ignition!
● Do not unscrew the cap on the coolant expansion tank when the en-
gine is hot. If the coolant is hot, the cooling system will be pressurised!
● Protect face, hands and arms by covering the cap with a large, thick
cloth to protect against escaping coolant and steam.
● Always make sure you have not left any objects, such as cleaning
cloths and tools, in the engine compartment.
● If you have to work underneath the vehicle, you must use suitable
stands additionally to support the vehicle, there is a risk of accident!. A
hydraulic jack is insufficient for securing the vehicle and there is a risk of
injury.
● If any work has to be performed when the engine is started or with
the engine running, there is an additional, potentially fatal, safety risk
from the rotating parts, such as the drive belts, alternator, radiator fan,
etc., and from the high-voltage ignition system. You should also observe
the following points:
–Never touch the electrical wiring of the ignition system.
– Ensure that jewellery, loose clothing and long hair do not get trap-
ped in rotating engine parts. Danger of death. Before starting any
work remove jewellery, tie back and cover hair, and wear tight-fitting
clothes.
– Never accelerate with a gear engaged without taking the necessary
precautions. The vehicle could move, even if the handbrake is ap-
plied. Danger of death.
● If work has to be carried out on the fuel system or on electrical com-
ponents, you must observe the following safety notes in addition to the
above warnings:
–Always disconnect the battery from the on-board network. The ve-
hicle must be unlocked when this is done, otherwise the alarm will be
triggered.
– Do not smoke.WARNING (Continued)
– Never work near naked flames.
– Always have a fire extinguisher on hand.
CAUTION
When topping up service fluids, make sure not to mistake them. Using the
wrong fluids could cause serious malfunctions and engine damage!
For the sake of the environment
Service fluids leaks are harmful to the environment. For this reason you
should make regular checks on the ground underneath your vehicle. If you
find spots of oil or other fluids, have your vehicle inspected in a specialised
workshop. 
Safety FirstOperating InstructionsPractical TipsTechnical Specifications

253
If and when
WARNING
Loosen the wheel bolts only about one turn before raising the vehicle
with the jack, otherwise there is a risk of accident.
Note
● If the wheel bolt is very tight, you may be able to loosen it by pushing
down the end of the spanner carefully with your foot. Hold on to the vehicle
for support and take care not to slip. 
Raising the vehicle
In order to remove the wheel, the vehicle must be raised
with a jack.
Fig. 171 Jack position
points
Fig. 172 Fitting the jack
– Locate the jacking point under the door sill closest to the wheel
to be changed ⇒ Fig. 171.
– Place the jack under the jacking point and turn the crank until
the arm of the jack is directly below the vertical rib under the
door sill.
– Align the jack so that the arm of the jack fits around the rib un-
der the door sill and the movable base plate of the jack is flat
on the ground ⇒ Fig. 172.
– Raise the jack until the defective wheel is just clear of the
ground.
Recesses at the front and rear of the door sills mark the jacking points
⇒  Fig. 171. There is only one jacking point for each wheel. Do not fit the jack
anywhere else.
An unstable surface under the jack may cause the vehicle to slip off the
jack. Therefore, the jack must be fitted on solid ground offering good sup-
port. Use a large and stable base, if necessary. On a hard, slippery surface
(such as tiles) use a rubber mat or similar to prevent the jack from slipping. 
Safety FirstOperating InstructionsPractical TipsTechnical Specifications

254If and when
WARNING
● Take all precautions so that the base of the jack does not slip. Failure
to do so could result in an accident.
● The vehicle can be damaged if the jack is not applied at the correct
jacking points. There is also a risk of injury since the jack can slip off
suddenly if it is not properly engaged.

Jack position points for vehicles with sill panel trim*
Fig. 173 Plastic sill pan-
el trim with jack allot-
ment cover
Vehicles with plastic sill panel trim, with cover*
– Remove the cap A
to access the anchor point for the vehicle
jack ⇒ 
Fig. 173.
– Pull on the cover and remove it from its allotment in the direc-
tion of the arrow ⇒ 
Fig. 173. –
Once the cover has been released, it will remain connected to
its strap so that is not lost. 
Removing and fitting the wheel
For removal and fitting the wheel, the following tasks must
be completed.
After loosening the wheel bolts and raising the vehicle with the
jack, change the wheel as described below:
Removing a wheel
– Unscrew the wheel bolts using the box spanner and place them
on a clean surface.
Fitting a wheel
– Screw on the wheel bolts in position and tighten them loosely
with a box spanner.
The wheel bolts should be clean and easily screwed. Before fitting the spare
wheel, inspect the wheel condition and hub mounting surfaces. These sur-
faces must be clean before fitting the wheel.
If tyres with a specific direction of rotation are fitted, note the direction of
rotation. 

Headlight range control . . . . . . . . . . . . . . . . . . 117
HeadlightsDriving abroad . . . . . . . . . . . . . . . . . . . . . . 200
Fog lights . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Headlight washer . . . . . . . . . . . . . . . . . . . . 127
Head restraints Adjusting . . . . . . . . . . . . . . . . . . . . . . 132, 133
Adjustment of the head restraint angle . . 133
Removing . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Heated front seats . . . . . . . . . . . . . . . . . . . . . . 135
Heated rear window 2C-Climatronic . . . . . . . . . . . . . . . . . . . . . . 160
Heating element wires . . . . . . . . . . . . . . . . 209
Heating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
High pressure cleaners . . . . . . . . . . . . . . . . . . 207
Hill-start aid . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
How to jump start description . . . . . . . . . . . . . 272
Hydraulic Brake Assist . . . . . . . . . . . . . . . . . . . 187
I
Identification number . . . . . . . . . . . . . . . . . . . 278
Identification plate . . . . . . . . . . . . . . . . . . . . . . 278
Ignition key . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Ignition lock . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Information in the multifunction display Memory displays . . . . . . . . . . . . . . . . . . . . . 63
Information messages in the display . . . . . . . . 65
Instrument and switch lighting . . . . . . . . . . . . 117
Instrument lighting . . . . . . . . . . . . . . . . . . . . . . 55 Instrument panel menu
Lights and visibility menu . . . . . . . . . . . . . . 74
Instrument panel menus Configuration menu . . . . . . . . . . . . . . . . . . . 72
Example of menu use . . . . . . . . . . . . . . . . . . 67
Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Vehicle status menu . . . . . . . . . . . . . . . . . . . 72
Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Interior lights . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Interior rear vision mirror . . . . . . . . . . . . . . . . . 128
Interval wipe, windscreen . . . . . . . . . . . . . . . . 124
ISOFIX system . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
J
Jack position points Sill panel trim with cover . . . . . . . . . . . . . . 254
Jump-starting . . . . . . . . . . . . . . . . . . . . . . . . . . 271
Jump leads . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
K
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
L
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Load compartment in the luggage compart- ment
see Loading the luggage compartment . . . 17
Loading the luggage compartment . . . . . . . . . . 17
Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Luggage compartment . . . . . . . . . . . . . . . . . . . 150
see also Loading the luggage compartment . .17
Luggage compartment net . . . . . . . . . . . . . . . 141
M
Main beam . . . . . . . . . . . . . . . . . . . . . . . . 113, 120
Main beam headlights control lamp . . . . . . . . . . . . . . . . . . . . . . . . . 81
Main headlight bulbs . . . . . . . . . . . . . . . . . . . . 263
Maintenance Airbags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Maintenance and cleaning . . . . . . . . . . . . . . . 205
Manual gearbox . . . . . . . . . . . . . . . . . . . . . . . . 174
Manual mode 2C-Climatronic . . . . . . . . . . . . . . . . . . . . . . 162
MEDIA-IN connector* . . . . . . . . . . . . . . . . . . . . 149
MFI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Mirrors Exterior mirrors . . . . . . . . . . . . . . . . . . . . . . 129
Interior rear vision mirror . . . . . . . . . . . . . . 128
Vanity mirrors . . . . . . . . . . . . . . . . . . . . . . . 123
Mobile phone . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Multi-purpose mobile storage compartment* 145 Closing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Opening . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Uses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Multifunction display . . . . . . . . . . . . . . . . . . . . . 62
293
Index