85A-15V1 MR-376-X76-85A000$080.mif
85A
UCH
Vdiag No.: 0F
NOTESOnly perform this conformity check after a complete check with the diagnostic tool.
The values indicated in this conformity check are given as examples.
Test conditions: Engine stopped, ignition on.
FunctionParameter or status
Checked or actionDisplay
and notesFault finding
Windscreen
wiperET027:Windscreen wiper
park positionActive when the wiper
control is in the
intermittent speed
position at each wiper
stop.In the event of a fault,
apply the interpretation of
the fault DF097
Windscreen wiper park
position.
ET097:Rear screen wiper
park positionActive when the wiper
control is in the
intermittent speed
position at each wiper
stop.In the event of a fault,
apply the interpretation of
fault DF040 Rear screen
wiper park position.
ET558:Windscreen wiper
speed setting
selectionYes when the wiper
control is in the
intermittent speed
position.In the event of a fault,
apply the interpretation of
status ET558.
ET555:Rear screen wiper
signalPresent during the rear
screen wiper command.In the event of a fault,
apply the interpretation of
status ET555
Windscreen
washerET492:Windscreen
washer signalPresent during the
windscreen washer/wiper
command.In the event of a fault,
apply the interpretation of
status ET492
ET557:Rear screen
washer signalPresent during the rear
screen washer/wiper
command.In the event of a fault,
apply the interpretation of
status ET557
UCH_V0F_CCONF
WIPERS - WASHERS
Fault finding – Conformity check
