2013 RENAULT KANGOO check engine

82A-35
AFTER REPAIRDeal with any faults displayed by the diagnostic tool.
Clear the faults from the computer memory using command RZ001 Fault memory.
V1 MR-376-X76-82A000$110.mif
ENGINE IMMOBILISER
Fault finding – Fault finding chart82A
SVT
Vdiag No.: 04
ALP1
CONTINUED 4
Check the continuity and insulation of the following connections:
For LOGAN, SANDERO and DUSTER:
–BP56 between components 225 and 1016 (+ before ignition feed),
–AP10 between components 225 and 1016 (+ after ignition feed),
–NC (left-hand drive) or MAM and NC (right-hand drive) of component 225.
For MEGANE II and SCENIC II:
–BP32 between components 225 and 260 (+ before ignition feed),
–AP43 between components 225 and 1337 (+ after ignition feed),
–MAM and NAM of component 225.
For MASTER II:
–BCP3 between components 225 and 1016 (+ before ignition feed),
–AP21 between components 225 and 1016 (+ after ignition feed),
–NC and MQ (left-hand drive) or NJ and MQ (right-hand drive) of component 225.
For THALIA 2/SYMBOL 2 and CLIO II F6:
–BP10 between components 225 and 1016 (+ before ignition feed),
–AP10 between components 225 and 1016 (+ after ignition feed)
,
–N and M of component 225.
For KANGOO VLL:
–BP10 between components 225 and 260 (+ before ignition feed),
–AP10 between components 225 and 260 (+ after ignition feed),
–MK and NA of component 225.
If the connection or connections are faulty and there is a repair method (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise replace the wiring.

82A-36
AFTER REPAIRDeal with any faults displayed by the diagnostic tool.
Clear the faults from the computer memory using command RZ001 Fault memory.
V1 MR-376-X76-82A000$110.mif
ENGINE IMMOBILISER
Fault finding – Fault finding chart82A
SVT
Vdiag No.: 04
ALP1
CONTINUED 5
Check the continuity and insulation of the following connection:
•HK between components 225 and 2186.
If the connection is faulty and there is a repair procedure (see Technical Note 6015A, Electrical wiring repair,
Wiring: Precautions for repair), repair the wiring, otherwise replace the wiring.
Check that the diagnostic socket, component code 225, is correctly supplied by checking the following
connections:
For LOGAN, SANDERO and DUSTER:
–BP56 on component 225 (+ before ignition feed),
–AP10 on component 225 (+ after ignition feed).
For MEGANE II and SCENIC II:
–BP32 on component 225 (+ before ignition feed),
–AP43 on component 225 (+ after ignition feed).
For MASTER II:
–BCP3 on component 225 (+ before ignition feed),
–AP21 on component 225 (+ after ignition feed).

82A-37
AFTER REPAIRDeal with any faults displayed by the diagnostic tool.
Clear the faults from the computer memory using command RZ001 Fault memory.
V1 MR-376-X76-82A000$110.mif
ENGINE IMMOBILISER
Fault finding – Fault finding chart82A
SVT
Vdiag No.: 04
ALP1
CONTINUED 6
For THALIA 2/SYMBOL 2, CLIO II F and KANGOO VLL:
–BP10 on component 225 (+ before ignition feed),
–AP10 on component 225 (+ after ignition feed).
If the connection or connections are faulty and there is a repair method (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise replace the wiring.
If dialogue is still not established after these various checks, replace the anti-theft tracking unit, component code
2186.
If the fault is still present, contact Techline.