Page 5 of 48
82D-5V1 MR-376-X76-82D000$030.mif
82D
UCH
Vdiag No.: 0F
Anti-theft tracking unit:
• List of system components and associated component codes:
•Anti-theft tracking unit diagram: Component code Component name
957Transponder unit
2186Anti-theft tracking unit
225Diagnostic socket
260Passenger compartment fuse box and relay
ACCESS - SECURITY
Fault finding – Operating diagram
Page 6 of 48
82D-6V1 MR-376-X76-82D000$030.mif
ACCESS - SECURITY
Fault finding – Operating diagram82D
UCH
Vdiag No.: 0F
Central door locking
• List of system components and associated component codes:
Component
codeComponent name
645Passenger compartment electrical control unit
123Central door locking switch
260Passenger compartment fuse box and relay
140Driver's door central locking
141Passenger's door central locking
142Luggage compartment lid central locking
1200Side door locking ECU (depending on version)
1199Fuel cap presence sensor (depending on version)
Page 22 of 48

82D-22
AFTER REPAIRFollow the instructions.
Deal with any other faults.
Clear the stored faults.
V1 MR-376-X76-82D000$080.mif
ACCESS - SECURITY
Fault finding – Interpretation of faults82D
UCH
Vdiag No.: 0F
DF274
PRESENTCENTRAL DOOR LOCKING BUTTON1. DEF: (-) button jammed
2. DEF: (+) button jammed
NOTESThe fault is declared stored after activation of the door locking button.
Special Note:
Use Wiring Diagrams Technical Note for Kangoo VLL.
Check the condition and presence of fuse F31 in the passenger compartment fuse and relay box, component code
260 (see MR 374 Mechanical, 81C, Fuses, Fuses: List and location of components).
Check the connection and condition of the UCH connector, component code 645 and check the electric door
locking control connector, component code 123.
If the connector(s) are faulty and there is a repair procedure (see Technical Note 6015A, Electrical wiring repair,
Wiring: Precautions for repair), repair the connector, otherwise replace the wiring.
Check the insulation and continuity of the following connections:
•20B between components 645 and 123,
•20A between components 645 and 123.
•MK of component 123.
If the connection or connections are faulty and if there is a repair method (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise replace the wiring.
If the fault is still present, contact the Techline.
UCH_V0F_DF274P
Page 31 of 48

82D-31
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
V1 MR-376-X76-82D000$150.mif
82D
UCH
Vdiag No.: 0F
AC004
AC005
AC006OPENING ELEMENT LOCKINGOPENING ELEMENT UNLOCKING
DRIVER'S DOOR UNLOCKING
NOTESThere must be no present or stored faults.
This command is for testing locking relay operation.
This command lasts for 2 seconds.
Special Note:
Use Wiring Diagrams Technical Note for Kangoo VLL.
Check the condition and connection of the UCH connector, component code 645.
If the connector is faulty and there is a repair procedure (see Technical Note 6015A, Electrical wiring repair,
Wiring: Precautions for repair), repair the connector, otherwise replace the wiring.
Check the condition and connection of the connectors of the components: driver's door central locking,
component code 140, passenger door central locking, component code 141, luggage compartment lid central
locking, component code 142 and side door central locking computer, component code 1200 (depending on
version).
If the connectors are faulty and if there is a repair procedure (see Technical Note 6015A, Repairing electrical
wiring, wiring: Precautions for repair), repair the connector, otherwise replace the wiring.
Check the continuity, insulation and the absence of interference resistance on the following connections:
Driver's door electric lock:
–20AU between components 140 and 645,
–20D between components 140 and 645.
UCH_V0F_AC004/UCH_V0F_AC005/UCH_V0F_AC006
ACCESS - SECURITY
Fault finding – Interpretation of commands
Page 43 of 48
82D-43
AFTER REPAIRCarry out a complete check with the diagnostic tool.
V1 MR-376-X76-82D000$170.mif
ACCESS - SECURITY
Fault finding – Fault finding chart82D
UCH
Vdiag No.: 0F
ALP 8 No electric window operation
Switch on the + after ignition
Check the presence and condition of the fuses F19 (25 A) for the driver's electric window control, component code
132 and F20 (25 A) for the driver's electric window control for the front passenger window, component code 133
and F32 (25 A) for the passenger electric window control, component code 532 on the passenger compartment
fuse and relay box, component code 260.
Are they in good condition?
Replace the fuse(s) if the checks are not correct
(see MR 374, Mechanical, 81C, Fuses, Fuses:
List and location of components).
A
YESNO
UCH_V0F_ALP08