2013 RENAULT KANGOO diagram

82D-22
AFTER REPAIRFollow the instructions.
Deal with any other faults.
Clear the stored faults.
V1 MR-376-X76-82D000$080.mif
ACCESS - SECURITY
Fault finding – Interpretation of faults82D
UCH
Vdiag No.: 0F
DF274
PRESENTCENTRAL DOOR LOCKING BUTTON1. DEF: (-) button jammed
2. DEF: (+) button jammed
NOTESThe fault is declared stored after activation of the door locking button.
Special Note:
Use Wiring Diagrams Technical Note for Kangoo VLL.
Check the condition and presence of fuse F31 in the passenger compartment fuse and relay box, component code
260 (see MR 374 Mechanical, 81C, Fuses, Fuses: List and location of components).
Check the connection and condition of the UCH connector, component code 645 and check the electric door
locking control connector, component code 123.
If the connector(s) are faulty and there is a repair procedure (see Technical Note 6015A, Electrical wiring repair,
Wiring: Precautions for repair), repair the connector, otherwise replace the wiring.
Check the insulation and continuity of the following connections:
•20B between components 645 and 123,
•20A between components 645 and 123.
•MK of component 123.
If the connection or connections are faulty and if there is a repair method (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise replace the wiring.
If the fault is still present, contact the Techline.
UCH_V0F_DF274P

82D-26
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
V1 MR-376-X76-82D000$110.mif
ACCESS - SECURITY
Fault finding – Interpretation of statuses82D
UCH
Vdiag No.: 0F
ET185KEY CODE RECEIVED
NOTESCheck that no fault is present or stored.
The status is YES when the ignition is switched on (+ after ignition feed) with a valid key.
If the status remains NO, try another key assigned to the vehicle before performing any
operation.
Special Note:
Use Wiring Diagrams Technical Note for Kangoo VLL.
ET185: NO with ignition on and a key that belongs to the vehicle.
Check that status ET004 + 12 V After ignition feed is YES with the ignition on.
Remove any metal objects from the key-ring and try again.
Switch on the ignition with the key from another vehicle, changing the key inserts:
If status KEY CODE RECEIVED changes to YES, replace the vehicle key.
If status KEY CODE RECEIVED remains NO, check the connections between the transponder unit, component
code 957 and the UCH, component code 645.
If the connector is faulty and there is a repair method (see Technical Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair), repair the connector, otherwise replace the wiring.
If the problem persists, replace the transponder unit.
UCH_V0F_ET185

82D-31
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
V1 MR-376-X76-82D000$150.mif
82D
UCH
Vdiag No.: 0F
AC004
AC005
AC006OPENING ELEMENT LOCKINGOPENING ELEMENT UNLOCKING
DRIVER'S DOOR UNLOCKING
NOTESThere must be no present or stored faults.
This command is for testing locking relay operation.
This command lasts for 2 seconds.
Special Note:
Use Wiring Diagrams Technical Note for Kangoo VLL.
Check the condition and connection of the UCH connector, component code 645.
If the connector is faulty and there is a repair procedure (see Technical Note 6015A, Electrical wiring repair,
Wiring: Precautions for repair), repair the connector, otherwise replace the wiring.
Check the condition and connection of the connectors of the components: driver's door central locking,
component code 140, passenger door central locking, component code 141, luggage compartment lid central
locking, component code 142 and side door central locking computer, component code 1200 (depending on
version).
If the connectors are faulty and if there is a repair procedure (see Technical Note 6015A, Repairing electrical
wiring, wiring: Precautions for repair), repair the connector, otherwise replace the wiring.
Check the continuity, insulation and the absence of interference resistance on the following connections:
Driver's door electric lock:
–20AU between components 140 and 645,
–20D between components 140 and 645.
UCH_V0F_AC004/UCH_V0F_AC005/UCH_V0F_AC006
ACCESS - SECURITY
Fault finding – Interpretation of commands