Downloaded from www.Manualslib.com manuals search engine 98CUP_2013 Release
C-7
B.3 CAPACITIES
REGULATIONS / RECOMMENDATIONS
Capacity Characteristics Comments
Fuel tank 42L ·
Free practice or private testing: SP 98
grade unleaded
· Events: see technical regulations Tolerance:
-0L/+1.5L
Engine lubricant
4.0L : engine
(4.2L with the oil filter) Elf EXCELLIUM NF
5W40
See technical
regulations
Gearbox lubricant
Casing : 1.3L
(1.5L with the
cooling circuit) ELF HTX 755 or
Motul Gear Competition
(SADEV preconisation ) 80 W 140
75W140 See technical
regulations
Coolant 6.5L Glaceol RX Type D free
Front/rear brake
fluid <800mL CASTROL SRF See technical
regulations
The use of :
· Elf Excelcium 5W40 engine oil
· CASTROL SRF brake fluid
are mandatory
(refer to technical regulations).
You are free to use alternatives for all other flui ds, but they must comply with the
characteristics specified above.
All brand new cars are delivered with
TOTAL SP98 grade unleaded : 10L Elf Excellium NF 5w40 engine oil
CASTROL SRF brake fluid
ELF HTX 755 gearbox oil
Downloaded from www.Manualslib.com manuals search engine 98CUP_2013 Release
C-31
Checks
-
Extinguisher cylinder compliance check:
The following information must be clearly
visible on the cylinder: · Serial number.
· Capacity and weight or volume of
extinguisher product.
· Activation date or date of last system check.
· Date of next service.
· Homologation number.
Take care not to exceed the extinguisher’s
next scheduled service date.
- Pressure check
The pressure of the cylinder may be checked using a
manometer placed on the cylinder.
The needle must be situated in the green area on th e
manometer dial.
B.7.2 CIRCUIT BREAKER
There is an emergency circuit breaker control at
the base of the windshield pillar. It must be
indicated by a sticker with a red lightening symbol
on a blue background. This button may be used to
switch off the vehicle’s electrics from the outside .
B.7.3 OTHER SAFETY EQUIPMENT
- The presence of the window safety net (ref. 77 11 160 041) on the driver side of
the roll cage is mandatory.
- It is mandatory for foam (ref 77 11 160 040) to be placed on all parts of the roll
cage with which the driver’s helmet may come into c ontact.
- The seats (original part ref: 77 11 167 158 and XL version part ref: 77 11 167
160 ) and the harness (ref 77 111 167 161) are compatible with FHR system.
The use of « FHR » system must be in compliance with the installation
standard of FIA.
