Page 12 of 35
Downloaded from www.Manualslib.com manuals search engine 98CUP_2013 Release
C-12
B.6.3 DASHBOARD: COSWORTH ICD 01D-032954-RST
B.6.3.1 Pages
The display contains 8 pages classified in 2 differ ent families :
- Family 1 : 3 “driver” pages
-
Family 2 : 5 “diagnostic” pages
B.6.3.1.1 D
RIVER PAGE 1 : RACE PAGE
Area “LAP” :
Time : Current lap time (stay displayed 10s after having being cut)
Lap # : number of lap completed during the RUN
Area “Speed” : Current speed displayed (depends on tyre diameter, configurable in Toolset (see
chapter G - Softwares )
Area “Default” :
When 1 or several defaults appear, they are scrolli ng on this area when the default is still
present.
NOTE :
Even if the defaults disappears (Oil_P min, or GB_p ot_def for example) :
- A letter in the area “Event” is recorded depending on the kind of default.
- A alarm LED appears on top right or top left positi on (engine or Gearbox alarm)
Area “Event: Each letter means that during the last or current R UN, an
alarm was recorded (even if it disappeared after) t o
encourage team to check the default.
W : Water temp alarm recorded (min or max)
O : Oil pressure recorded (min or max)
B : Battery voltage recorded (min or max)
E : engine alarm recorded (other engine sensor than W, O, B)
G : gearbox alarm recorded
Default
Engine alarm LED
Gearbox alarm LED
Page 13 of 35
Downloaded from www.Manualslib.com manuals search engine 98CUP_2013 Release
C-13
Area “MAP” “DRY” or “WET” depending on the engine MAP selected on the Facia switch panel
Area “GEAR”
Corresponds to Gearbox ratio engaged (R, N, 1, 2, 3 , 4, 5, 6)
Area “RPM” Current engine speed in RPM (“xxxx RPM”)
Area “RAIN LIGHT”
“OFF” (grey background) or “ON” (green backgound) d epending on the Facia switch
panel interrupter position.
Area “Engine”
Engine oil pressure (bars)
Engine water temperature (°C)
Battery voltage (V)
NOTE :
these 3 Values corresponds to the Category A alarm s
B.6.3.1.2 D
RIVER PAGE 2 : QUALIFICATION PAGE
Area “LAP”, “Speed”, “MAP”, “Events”, “Default”, “r ain light”, “RPM”, “GEAR” and “alarms
LED” remains the same as the RACE PAGE. Only the “S plits” replace the “engine” area
Area “Splits” This Area represents the Qualifying mode (QM) confi guration
- Time difference : current split compared to split recorded from
the best lap
- Bargraph : 1 bar = 1 tenth (+/- 1 sec)
- Split : Current split time : reference
NOTE :
Refer to chapter G-Softwares for the full Qualifying mode configuration
Default
Engine alarm LED
Gearbox alarm
LED
Page 14 of 35
Downloaded from www.Manualslib.com manuals search engine 98CUP_2013 Release
C-14
B.6.3.1.3 DRIVER PAGE 3 : CIRCUIT MAP PAGE
Refer to chapter G-Softwares to upload a circuit map (.bmp)
NOTE:
This map is just for information and is not dynami c
B.6.3.1.4 DIAGNOTIC PAGE 1 : ENGINE DIAGNOSTIC
Areas “Events”, “Default” and “rain light”, remains the same as DRIVERS PAGE.
NOTE:
When an alarm appears in the area “default”, the co rresponding value by default is
displayed in blue, red or orange.
Page 19 of 35
Downloaded from www.Manualslib.com manuals search engine 98CUP_2013 Release
C-19
B.6.3.2 Changing pages
The pages of the display may be changed by pressing on the push button ‘PAGE” of the
steering wheel - Pressing briefly on this button (one second) moves the display in the 3 driver
pages
- Pressing this button for longer (more than 2 second s) moves the display from
driver pages to diagnostic pages
- Pressing briefly on the button moves the display in the 5 diagnostic pages
You can return to the driver pages by pressing the button for a longer period (more than
2 seconds). The display returns to the first driver page
B.6.3.3 Leds / shiftlights
Shiftlights (8):
Shiftlight thresholds are fully configurable using the “Toolset” software, see chapter G-
Softwares
The LEDs light up in all gear ratios. By default, t he setup is the following one:
LEDs Alarm (2):
On the left side, 1 LED lights up when an engine al arm rises up
On the right side, 1 LED lights up when a Gearbox a larm rises up
These LEDs are associated with the message displaye d in the area “Default” and with the
letter recorded in the area “events”
Engine alarm LED gearbox
alarm LED
Shiftlights
5000 5200 5400 5600 5800 6000 6200 6300 Engine RPM at which LEDs
light up
