Page 244 of 332
06
SELECTING A STATION
The exterior environment (hills, buildings, tunnel, car park, below ground...) may prevent reception, even in RDS station tracking mode.
This phenomenon is normal in the propagation of radio waves and is in no way indicative of a fault with the audio system.
Select "Radio".
Press MENUto display the " MAIN MENU
" then select " Media
".
Select a radio station from the list offered.
If necessar
y, select changing the source.
Pr
ess the MODEbutton until the radio is
displayed.
Select "FM Radio" or "AM Radio". OR
Select "Update" to refresh the list.
RADIO
242
Page 245 of 332
06
243
CHANGE A RADIO FREQUENCY
By alphabetical list
Press the current radio band then choose the radio station from the list offered.
B
y automatic frequency search
Pr
ess or to move the cursor for an automatic search down or up for a radiofrequency.
Select changing source.
B
y manual frequency search
Pr
ess "Frequency
", then enter the frequencyusing the keypad and confi rm.
Select "Radio
".
Press MENUto display the "MAIN MENU" thenselect "Media ".
Select " FM Radio
" or " AM Radio
".
OR
RADIO
Page 246 of 332
06
PRESET A STATION
From the permanent display, press "Memory".
Select a radio station or frequency
(refer to the corresponding section).
Select a number in the list to preset the
previously chosen radio station.
A long press on this number presets (momorises) the station.
Recall
pre-set stations
Press MENUto display the " MAIN MENU " then select " Media".
Select "Radio".
RADIO
Select "Memory".
244
Page 247 of 332
06
245
ACTIVATE / DEACTIVATE RDS
Select " RDS".
Press the MODE
button until the
RADIO / MEDIA display is obtained.
Select Alternative frequencies (RDS).
Select Confi rm.
RD
S, if activated, allows you to continue listening to the same
station by automatic retuning to alternative frequencies. However, incertain conditions, coverage of an RDS station may not be assured
throughout the entire country as radio stations do not cover 100 % of
the territory. This explains the loss of reception of the station during
a journey.
RADIO
Page 248 of 332

06
246
CD, MP3 CD, USB PLAYER, AUXILIARY
Insert the CD in the player, insert the USBmemory stick in the USB player or connect theUSB peripheral to the USB port using a suitablecable (not supplied).
The s
ystem builds playlists (in temporarymemory), an operation which can take froma few seconds to several minutes at the fi rstconnection.
R
educe the number of non-music fi les and the number of folders to reduce the waiting time.
The playlists are updated every time the ignition
is switched off or connection of a USB memory stick. However, the system memorises these
lists and if they are not modifi ed, the loadingtime will be shorter.SELECTION OF SOURCE
The steering mounted SRC(source) button can be used to go to thenext media source, available if the source is active.
"CD / CD MP
3"
"
USB, iPod
"
"
Bluetooth (streaming)
"
"Auxiliary
"
"Radio"
Select changing source then choose thesource. Pr
ess the MODE button
until the RADIO / MEDIA
display is obtained.
It is also possible to chan
ge source from the
top bar.
MUSIC
Page 252 of 332
06
USING THE AUXILIARY INPUT (AUX)
Cable not supplied
Connect the portable device (MP3 player…) to the auxiliary JACK
socket using an audio cable.
First ad
just the volume of your portable device (to a high level). Then
adjust the volume of your audio system.
Displa
y and management of the controls are via the portable device.
Select changing the source.
Press the MODE button until the RADIO
display is obtained.
Select the AUXILIARYsource.Y
MUSIC
250
Page 253 of 332

06
251
- " Ambience" (choice of 6 musical ambiences)
- " Bass"
-"
Treble"
-
"Loudness" (Activate/Deactivate)
-
"Distribution" (" Driver
", "rAll passengers", " Front speakers only
")
The audio settin
gs ( Ambience
, Bass
, Trebleand Loudness) are
different and independent for each sound source.
The settin
gs for distribution and balance are common to all sources.
The distribution
(or spatialisation using the Arkamys© system)©
of sound is an audio process that allows the audio quality to be
adapted to the number of listeners in the vehicle.
On-board audio: Arkamys©
Sound Staging.©
With Sound Staging, the driver and passengers are immersed in an
"audio scene" recreating the natural atmosphere of an auditorium:
truly a part of the scene and its surroundings.
This new sensation is made possible b
y software in the audiosystem which processes the digital signals from the media players (radio, CD, MP3…) without changing the audio settings. This
processing takes account of the characteristics of the passenger compartment to produce optimum results.
The Arkam
ys© software installed in your audio system processes ©
the digital signal from the media players (radio, CD, MP3, ...) and
recreates a natural musical scene, with harmonious placement of
instruments and voices in the space in front of passengers, level with
the windscreen.
AUDIO
Select "Audio".
Press Menu to display the "MAIN MENU
", then select " Preferences".
Select "Ambience
" or " Distribution".
SETTINGS
Page 273 of 332

FREQUENTLY ASKED QUESTIONS
271
QUESTION
ANSWER
SOLUTION
Some characters in themedia information are not
displayed correctly while playing. The audio s
ystem does not display some types of characters. Use standard characters to name tracks and
folders.
Pla
ying of streaming fi lesdoes not start. The peripheral device connected does not support automatic play. Start the playback from the device.
Th
e names of tracks and
the track length are not
displa
yed on the screen
when streaming audio. The Bluetooth pro
fi le does not allow the transfer of this information.
The qualit
y of receptionof the radio station listened to graduallydeteriorates or the stored stations do not function(no sound, 87.5 Mhz is
displayed...). The vehicle is too far from the transmitter used b
y the station listened
to or there is no transmitter in the geographical area through which the
vehicle is travelling.
Activate the "RDS" function by means of theshort-cut menu to enable the system to check
whether there is a more powerful transmitter in the
geographical area.
The environment
(hills, buildings, tunnels, basement car parks...) block reception, including in RDS mode. This phenomenon is normal and does not indicate
a fault with the audio system.
The aerial is absent or has been dama
ged (for example when goingthrough a car wash or into an underground car park). Have the aerial checked by a PEUGEOT dealer.
I
cannot fi nd some radiostations in the list of stations received.
The station is not received or its name has changed in the list.
Some radio stations send other information in
place of their name (the title of the song for example).
The s
ystem interprets this information as the name of the station.
The name of the radio station changes.