2013 Peugeot 208 bulb

.
.
Contents
Direction indicators 125Hazard warning lamps 125Emergency or assistance call 126Horn 126ESP system 127Front seat belts 130Airbags 133Child seats 137ISOFIX child seats 143Child lock 146
Safety
Te m p o r a ry puncture repair kit 147Changing a wheel 153Snow chains 160Changing a bulb 161Changing a fuse 168Battery 174Electrical energy economy mode 177Changing a wiper blade 178To w i ng the vehicle 179To w i ng a trailer 181Fitting roof bars 183Advice on care and maintenance 184Accessories 185
Practical information
Bonnet 188Petrol engines 189Diesel engines 190Fuel tank 191Misfuel prevention (Diesel) 193Running out of fuel (Diesel) 195Checking levels 196Checks 199
Checks
Petrol engines 201Petrol weights 203Diesel engines 206Diesel weights 208Dimensions 211Identifi cation markings 212
Technical data
Emergency or assistance 213Touch screen 215Audio system / Bluetooth 275Audio system 301
Audio equipment and telematics
Visual search
Alphabetical index

114
Visibility
Daytime running lamps
Daytime lighting, compulsory in cer tain
countries, which comes on automatically when
the engine is star ted making the vehicle more
visible to other users.
LED lamps
They come on when the engine is star ted.
Depending on the country of sale, they are used for:
- daytime running lamps * in day mode and
sidelamps in night mode (they are brighter
when daytime running lamps), or
- sidelamps in day and night mode.

*

Function that can be set in the vehicleconfiguration menu.
Thi
s function is assured:


- in countries where it is imposed by
re
gulations,
by illumination of the dipped beam
headlamps with the sidelamps and number
plate lamps; this function cannot be
deactivated.

- for other countries where it is provided,
by the use of dedicated lamps (bulbs or
LEDs); this function can be activated or
deactivated via the vehicle configurationmenu.
The lighting control stalk must be placed in
th
e "0"
or "AUTO"
(day mode) position.
Deactivation of the daytime running lamps iseffective after operation of the lighting control
stalk or after the next engine start; activation iseffective immediately.

The instruments and controls
(instrument
panel, multifunction screen, air conditioning control panel, ...) are not illuminated, except
in night mode with manual or automatic
illumination of headlamps.

161
7
Practical information











Changing a bulb


Front lamps
A. Model with light guide

In some weather conditions (e.g. low temperature or humidity), the presence of misting on the internal sur face of the glass of the headlamps and rear lampsis normal; it disappears after the lamps have been on for a few minutes.

The headlamps are fitted with polycarbonate glass with a protectivecoating:)
do not clean them using a dry or abrasive cloth, nor with a detergent or solvent product,)
use a sponge and soapy water or apH neutral product,)
when using a high pressure washer on persistent marks, do not keep the lance directed towards thelamps or their edges for too long, so as not to damage their protectivecoating and seals,)
do not touch the bulb directly withyour fingers, use lint-free cloths.
Changing a bulb should only be doneafter the headlamp has been switched off for a few minutes (risk of serious burns). It is imperative to use only anti-ultraviolet (UV) type bulbs in order notto damage the headlamp. Always replace a failed bulb with a new bulb with the same type andspecification.
B. Model without light guide
1.Main beam headlamps (H7-55W).2.Dipped beam headlamps (H7-55W).3.Daytime running lamps / sidelamps(light emitting diodes - LEDs).4.Direction indicators (PWY-24W).
5.Front foglamps (directional accordingto version) (H11- 55W).
1.Main beam headlamps (H7-55W).2.Dipped beam headlamps (H7-55W).3.Daytime running lamps / sidelamps (W5-5W).4.Direction indicators (PWY-24W).5. Front foglamps (directional accordingto version) (H11- 55W).

162
Practical information
Changing dipped beam headlampbulbs
) Remove the protective cover by pulling on
the tab. ) Disconnect the bulb connector.)Spread the spring to release the bulb (model A).AA)
Extract the bulb and change it.

Amber coloured bulbs, such as thedirection indicators, must be replacedwith bulbs of identical specificationsand colour.
When refitting, close the protective cover carefully to preser ve the sealing of the headlamp.

Rapid flashing of the direction indicator warning lamp (right or left) indicates thefailure of a bulb on that side.
Changing direction indicator bulbs
)Turn the bulb holder a quarter of a turn and extract it. )Pull out the bulb and change it.
To reassemble, carry out these operations in
reverse order.
To reassemble, carry out these operations in
reverse order, positioning the alignment lug at
the bottom
(model A) or at the top (model AB ).

163
7
Practical information

Changing main beam headlamp bulbs
)Remove the protective cover by pulling on the tab.)Disconnect the bulb connector. )Pull out the bulb and replace it.
Changing daytime running lamp /
sidelamp bulbs
) Turn the bulb holder a quar ter turn and pull it out. )
Pull out the bulb and replace it.
To reassemble, carry out these operations inreverse order.

Changing the daytime running lamps / sidelamps (light-emittingdiodes - LEDs)

For the replacement of this type of LED lamp, contact a PEUGEOT dealer or a qualified
workshop.

To reassemble, carry out these operations in
reverse order, positioning the alignment lug at
the bottom.

164
Practical information
Changing front foglamp / directional lamps
) Access to the front foglamp is through the
orifice below the bumper.
) Disconnect the bulb holder connector by pressing on the top of the tongue. )
Extract the bulb holder by pressing on the
two clips clips (top and bottom).) Replace the module.
To reassemble, carry out these operations in
reverse order.
Changing integrated direction
indicator side repeater bulbs
)Press the central tongue and remove the side repeater. )Pull the bulb holder out and replace the failed bulb.
To reassemble, carry out these operations in
reverse order.
You should contact a PEUGEOT dealer or aqualified workshop for the replacement of thesebulbs.

)
Insert a flat screwdriver between the mirror glass and its base.)
Use the screwdriver as a lever to extract
the mirror glass. ) Unclip the mirror shell by pressing on the
two retaining clips.
To obtain this module, contact aPEUGEOT dealer or a qualifiedworkshop. You can also contact a PEUGEOT dealer or a qualified workshop for thisreplacement.

166
Practical information
These three bulbs are changed from inside the boot:
)open the boot, )remove the access grille from the corresponding side trim panel, )slacken and remove the nut, )disconnect the lamp unit connector, )unclip the lamp unit carefully extract itpulling in line towards the outside,
)
press the four tabs and remove the bulb
holder,
) turn the bulb a quarter of a turn and change it.
To r e a s s e m b l e , c a r ry out these operations in reverse order.
Take care to engage the lamp unit in its guides,
while keeping it in line with the vehicle.
Tighten sufficiently to ensure sealing, but
without damaging the lamp.

167
7
Practical information
Changing the third brake lamp
bulbs
)Unscrew the fixing pins on each side of the
lamp, without removing them completely. )Push on the screws to unclip the lamp.
)Disconnect the lamp connector.)Remove the lamp from the outside.)Turn the bulb holder which corresponds
to the faulty bulb one quar ter of a turn and remove it.)Pull the bulb and change it.
To r e f i t , c a r ry out these operations in reverse order.

Number plate lamps
To facilitate the removal of the lamp, carry out
this operation with the tailgate half open.
) Insert a thin screwdriver into the lenscutout. )
Push it outwards. )
Remove the lens.)
Change the faulty bulb.
To refit, press on the lens to clip it in place.
Access is by passing a hand under the bumper. ) Turn the bulb holder a quarter of a turn and
pull it out.)
Disconnect the connector on the bulb holder. )
Pull the bulb out and change it.
To r e f i t , c a r ry out these operations in reverseorder.
You can also contact a PEUGEOT dealer or a qualified workshop for the replacement of these bulbs.
Changing a foglamp bulb