2013 NISSAN PATHFINDER Owners Manual

Page 465 of 506

NISSAN PATHFINDER 2013 R52 / 4.G Owners Manual If excessive tire wear is found, it is recommended
that all four tires be replaced with tires of the
same size, brand, construction and tread pattern.
The tire pressure and wheel alignment should
also

Page 466 of 506

NISSAN PATHFINDER 2013 R52 / 4.G Owners Manual 9 Technical and consumer information
Capacities and recommended fuel/lubricants.........9-2
Fuel recommendation ...........................9-3
Engine oil and oil filter recommendations ..........9-5
A

Page 467 of 506

NISSAN PATHFINDER 2013 R52 / 4.G Owners Manual The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure
described in the “Maintenance and do-it-yourself” section to

Page 468 of 506

NISSAN PATHFINDER 2013 R52 / 4.G Owners Manual FUEL RECOMMENDATION
Use unleaded regular gasoline with an octane
rating of at least 87 AKI (Anti-Knock Index) num-
ber (Research octane number 91) .
CAUTION
●Only vehicles with the E-85 filler door

Page 469 of 506

NISSAN PATHFINDER 2013 R52 / 4.G Owners Manual ●If a methanol blend is used, it should
contain no more than 5% methanol
(methyl alcohol, wood alcohol) . It
should also contain a suitable amount
of appropriate cosolvents and corro-
sion inhibitor

Page 470 of 506

NISSAN PATHFINDER 2013 R52 / 4.G Owners Manual ENGINE OIL AND OIL FILTER
RECOMMENDATIONS
Selecting the correct oil
It is essential to choose the correct grade, quality
and viscosity engine oil to ensure satisfactory
engine life and performance. Se

Page 471 of 506

NISSAN PATHFINDER 2013 R52 / 4.G Owners Manual Your engine was filled with a high-quality engine
oil when it was built. You do not have to change
the oil before the first recommended change
interval. Oil and filter change intervals depend
upon how

Page 472 of 506

NISSAN PATHFINDER 2013 R52 / 4.G Owners Manual ENGINE
ModelVQ35DE
Type Gasoline, 4-cycle, DOHC
Cylinder arrangement 6-cylinder, V-block, Slanted at 60°
Bore x Stroke in (mm) 3.780 x 3.189 (96 x 81)
Displacement cu in (cm
3) 213.45 (3,498)
Firing