2013 MITSUBISHI LANCER SE AWC fuel consumption

[x] Cancel search: fuel consumption

Page 97 of 722

MITSUBISHI LANCER SE AWC 2013 8.G Owners Manual 3-2 Features and controls
3Break-in recommendations
N00508700297
Advanced automobile manufacturing techniques permit you to
operate your new vehicle without requiring a long break-in
period of low-spe

Page 232 of 722

MITSUBISHI LANCER SE AWC 2013 8.G Owners Manual Features and controls
3-137
3
Drive mode-selector
N00548400010
The drive mode can be selected by pressing the switch while
the ignition switch is in the “ON” position.
The drive mode is displayed

Page 277 of 722

MITSUBISHI LANCER SE AWC 2013 8.G Owners Manual 3-182 Features and controls
3Multi-information display
N00555000236
The multi-information display displays warnings, the odometer, trip odometer, service reminder, engine coolant temperature, fuel
rem

Page 278 of 722

MITSUBISHI LANCER SE AWC 2013 8.G Owners Manual Features and controls
3-183
3
NOTEThe fuel units, temperature units, display language, and
other settings can be changed.
Refer to “Changing the function settings (With ignition
switch in the “ON

Page 286 of 722

MITSUBISHI LANCER SE AWC 2013 8.G Owners Manual Features and controls
3-191
3
NOTEWhile driving, the function setting screen is not displayed
even if you operate the multi-information meter switch.
Always park the vehicle in a safe place before op

Page 288 of 722

MITSUBISHI LANCER SE AWC 2013 8.G Owners Manual Features and controls
3-193
3
Average speed displayThis displays the average speed from the last reset to the
present.
There are 2 types of mode settings as follows.
For details on how to change the a

Page 289 of 722

MITSUBISHI LANCER SE AWC 2013 8.G Owners Manual 3-194 Features and controls
3
Auto reset mode
When the average fuel consumption is being displayed, if
you hold down the multi-information meter switch, these
calculations will be reset to zero.
Whe

Page 298 of 722

MITSUBISHI LANCER SE AWC 2013 8.G Owners Manual Features and controls
3-203
3
NOTETo return the menu screen to the function setting screen,
press and hold the multi-information meter switch (for
about 2 seconds or more).
If no operations are made
Page:   1-8 9-16 next >