2013 MERCEDES-BENZ GLA SUV wheel

[x] Cancel search: wheel

Page 288 of 401

MERCEDES-BENZ GLA SUV 2013  Owners Manual Display messages
Possible causes/consequences and
M
MSolutions 4matic currently
4matic currently
unavailable unavailable 4MATIC (permanent all-wheel drive) has overheated. The vehicle is
only driven b

Page 292 of 401

MERCEDES-BENZ GLA SUV 2013  Owners Manual Safety systems
Problem
Possible causes/consequences and
M
MSolutions J
The red brake system
warning lamp is lit while
the engine is running. A
warning tone also
sounds. There is insufficient brake flu

Page 293 of 401

MERCEDES-BENZ GLA SUV 2013  Owners Manual Problem
Possible causes/consequences and
M
MSolutions !
The yellow ABS warning
lamp is lit while the
engine is running. ABS is temporarily unavailable. Therefore, BAS, COLLISION PRE-
VENTION ASSIST, C

Page 294 of 401

MERCEDES-BENZ GLA SUV 2013  Owners Manual Problem
Possible causes/consequences and
M
MSolutions !
The yellow ABS warning
lamp is lit while the
engine is running. A
warning tone also
sounds. EBD is faulty. Therefore, ABS, BAS, COLLISION PREVEN

Page 295 of 401

MERCEDES-BENZ GLA SUV 2013  Owners Manual Problem
Possible causes/consequences and
M
MSolutions ÷
The yellow ESP
®
warn-
ing lamp flashes while
the vehicle is in motion. ESP
®
or traction control has intervened because there is a risk of
s

Page 316 of 401

MERCEDES-BENZ GLA SUV 2013  Owners Manual X
Open the telephone compartment
(Y page 302).
X Place the mobile phone bracket into the
pre-installed fitting; see the separate instal- lation instructions for the mobile phone fit-
ting.
X Insert th

Page 325 of 401

MERCEDES-BENZ GLA SUV 2013  Owners Manual The multifunction display shows a service
message for a few seconds, e.g.:
R Service A in .. days
Service A in .. days
R Service A due
Service A due
R Service A overdue by .. days
Service A overdue by

Page 326 of 401

MERCEDES-BENZ GLA SUV 2013  Owners Manual ple, changed more frequently. The tyres must
be checked more frequently if the vehicle is
operated under increased loads. Further
information can be obtained at a qualified
specialist workshop, e.g. a