2013 MERCEDES-BENZ CLA COUPE wheel

[x] Cancel search: wheel

Page 176 of 373

MERCEDES-BENZ CLA COUPE 2013  Owners Manual If you leave the engine or the auxiliary heating
running, make sure the exhaust pipe and area
around the vehicle are clear of snow. To
ensure an adequate supply of fresh air, open a window on the side

Page 182 of 373

MERCEDES-BENZ CLA COUPE 2013  Owners Manual !
If DISTRONIC PLUS or the HOLD function
is activated, the vehicle brakes automati-
cally in certain situations. To prevent dam-
age to the vehicle, deactivate DISTRONIC
PLUS and the HOLD function in

Page 190 of 373

MERCEDES-BENZ CLA COUPE 2013  Owners Manual R
you depress the brake pedal again with a
certain amount of pressure until :disap-
pears from the multifunction display.
R you secure the vehicle using the electric
parking brake.
R you activate DIST

Page 191 of 373

MERCEDES-BENZ CLA COUPE 2013  Owners Manual X
To cancel: pull the left steering wheel shift
paddle (Y page 160).
or
X To confirm: pull the right steering wheel
shift paddle (Y page 160).
The RACE START available Depress
RACE START available Dep

Page 195 of 373

MERCEDES-BENZ CLA COUPE 2013  Owners Manual Problems with PARKTRONIC
Problem
Possible causes/consequences and
M
MSolutions Only the red segments
in the PARKTRONIC
warning displays are lit.
You also hear a warning
tone for approximately
two seco

Page 197 of 373

MERCEDES-BENZ CLA COUPE 2013  Owners Manual 35 km/h. While in operation, the system inde-
pendently locates and measures parking
spaces on both sides of the vehicle.
Active Parking Assist will only detect parking
spaces:
R that are parallel or

Page 199 of 373

MERCEDES-BENZ CLA COUPE 2013  Owners Manual Vehicles with automatic transmission:
shift the transmission to position Dor R.
The Start Park Assist? Yes: OK No:
Start Park Assist? Yes: OK No:
% message appears in the multifunction
display.
X To c

Page 201 of 373

MERCEDES-BENZ CLA COUPE 2013  Owners Manual Activating/deactivating the reversing
camera X
To activate: make sure that the key is in
position 2in the ignition lock.
X Make sure that the "Activation by R gear"
function is selected in the