2013 MERCEDES-BENZ CL CLASS child seat

[x] Cancel search: child seat

Page 65 of 496

MERCEDES-BENZ CL CLASS 2013  Owners Manual instructions when installing the LATCH-
type (ISOFIX) child restraint system.
Top Tether
Top Tether provides an additional connection
between the child restraint system secured
with ISOFIX and the rea

Page 66 of 496

MERCEDES-BENZ CL CLASS 2013  Owners Manual If children open a door, they could injure other
persons or get out of the vehicle and injure
themselves or be injured by following traffic.
Do not expose the child restraint system to
direct sunlight

Page 76 of 496

MERCEDES-BENZ CL CLASS 2013  Owners Manual Vehicle equipment
i This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-s

Page 83 of 496

MERCEDES-BENZ CL CLASS 2013  Owners Manual ProblemPossible causes/consequences and M SolutionsThe engine cannot be
started using the
SmartKey.The on-board voltage is too low.XRemove the SmartKey and re-insert it into the ignition lock.XStart t

Page 86 of 496

MERCEDES-BENZ CL CLASS 2013  Owners Manual XClose the front-passenger door.XMake sure that the doors and the trunk are
locked.
i If you lock the vehicle as described above,
the fuel filler flap is not locked. The anti-
theft alarm system is no

Page 88 of 496

MERCEDES-BENZ CL CLASS 2013  Owners Manual trunk opening/closing switch can be
operated. Therefore, do not leave children
unattended in the vehicle, or with access to
an unlocked vehicle. A child's unsupervised
access to a vehicle could re

Page 90 of 496

MERCEDES-BENZ CL CLASS 2013  Owners Manual Side windows
Important safety notes
GWARNING
When leaving the vehicle, always remove the
SmartKey from the ignition lock. Always take
the SmartKey with you and lock the vehicle.
Do not leave children

Page 93 of 496

MERCEDES-BENZ CL CLASS 2013  Owners Manual Problems with the side windows
Problem: a side window cannot be closed 
because an object is obstructing the side 
window.XRemove the object(s).XClose the side window.
Problem: a side window cannot be
Page:   < prev 1-8 9-16 17-24 25-32 33-40 next >