2013 MAZDA MODEL CX-5 instrument cluster

When Driving
5
Indicator light
Starting the Engine
For details, refer to Section 4, “Start/Stop Engine”.
(SKYACTIV-D 2.2)
• The starter does not rotate until the glow indicator light turns off.
• When starting the engine, do not release the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) until the glow indicator light in the
instrument cluster turns off and the engine starts, after pressing the push button
start.
1. Make sure the parking brake is on.
2. Continue to press the brake pedal firmly until
the engine has completely started.
3. (Manual transaxle)
Continue to press the clutch pedal firmly until
the engine has completely started.
(Automatic transaxle)
Put the vehicle in park (P). If you must restart the
engine while the vehicle is moving, shift into
neutral (N).
4. Press the push button start after both the KEY indicator
light (green) (if equipped) in the instrument cluster and
the push button start indicator light (green) illuminate.
• If the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle) is
released before the engine starts, depress the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) again and press the push button start to
start the engine.
• If the ignition is left switched ON for a long period of time without the engine
running after the glow plugs are warmed up, the glow plugs may warm up again
which will illuminate the glow indicator light.
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD

7
When Driving
For details, refer to Section 4, “Start/Stop Engine”.
i-stop OFF Switch
The i-stop function can be turned off by
pressing the switch until the beep sounds and
the i-stop warning light (amber) in the
instrument cluster illuminates.
The i-stop function can be turned back on by
pressing the switch again until the beep sounds
and the i-stop warning light (amber) turns off.
Operation of i-stop Function
(Automatic transaxle)
1.(Except European model)
The i-stop indicator light (green) illuminates when the i-stop conditions are met
while the vehicle is being driven.
2. The i-stop function operates when the brake pedal is depressed while driving
the vehicle (except for driving in reverse) and the vehicle is stopped. The
i-stop indicator light (green) also illuminates while the i-stop function is
operating.
3. When the brake pedal is released while the shift lever is in the D/M position (not
second gear fixed mode), the engine restarts automatically and the i-stop
indicator light (green) turns off. The i-stop indicator light (green) illuminates if
the i-stop function conditions are met again while driving (except European
model)
With the selector lever in the N or P position, the engine will not restart even if
the brake pedal is released. If the brake pedal is depressed again, the engine
will restart.
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD

8
When Driving
For details, refer to Section 4, “Instrument Cluster and Display”.
Warning/Indicator Lights
Signal Warning/Indicator Lights
1
2
3
4
5
6
7
8
9
10Brake System Warning Light Master Warning Light
ABS Warning Light
Charging System Warning Indication
Engine Oil Warning Indication
Check Engine Light
High Engine Coolant Temperature
Warning Light (Red)
i-stop Warning Light
(Amber)/Indicator Light (Green)
Rear Vehicle Monitoring (RVM)
System Warning Light
(Amber)/Indicator Light (Green)
11
12
13
14
15Lane Departure Warning System
(LDWS) Warning Light
(Amber)/Indicator Light (Green)
4WD Warning Indication
Automatic Transaxle Warning
Indication
Power Steering Malfunction
Indication
16Air Bag/Front Seat Belt Pretensioner
System Warning Light
Low Fuel Warning Light
17Seat Belt Warning Light
18
2022
23
24
30
31
32
33
Door-Ajar Warning IndicationTyre Pressure Monitoring System
Warning Light
KEY Indication
High Beam Control System (HBC)
Warning Light (Amber)/Indicator
Light (Green)
TCS/DSC Indicator Light
TCS OFF Indicator Light
AFS OFF Indicator Light
Low Engine Coolant Temperature
Indicator Light (Blue)
34
35
36
37
38Shift Position Indication
Headlight High-Beam Indicator
Light
Direction Indicator/Hazard Warning
Indicator Lights
Security Indicator Light
39Cruise Main Indicator Light
(Amber)/Cruise Set Indicator Light
(Green)
Lights-On Indicator Light
40Front Fog Light Indicator Light
Rear Fog Light Indicator Light Signal Warning/Indicator Lights
Some of the warning/indicator lights are displayed in the instrument cluster.
If a warning/indicator light is displayed in the instrument cluster, verify the
meaning of the warning in the Warning (Display Indication) item.
19Liftgate-Ajar Warning IndicationGlow Indicator Light
Diesel Particulate Filter Indication
Wrench Indication 25
26
27
Vehicle Speed Warning Indication28
29Sedimentor Warning Indication
Low Ambient Temperature Warning
Indication 21
Low Washer Fluid Level Warning
Indication
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD

When Driving
12
X Mark Full Low
For details, refer to Section 4, “Switches and Controls”, “ABS/TCS/DSC” or “Tyre Pressure
Monitoring System”.
Tyre Pressure Monitoring System
The Tyre Pressure Monitoring System (TPMS) monitors the air pressure of all
four tyres. If the air pressure of one or more tyres is too low, the system warns the
driver by indicating the tyre pressure monitoring system warning light in the
instrument cluster and operating a beep sound.
In the following cases, system initialization must be performed so that the system
operates normally.
• A tyre pressure is adjusted.
• Tyre rotation is performed.
• A tyre or wheel is replaced.
• The battery is replaced or completely drained.
• The tyre pressure monitoring system warning
light is illuminated.
Diesel Particulate Filter
The diesel particulate filter collects and removes most of the particulate matter
(PM) in the exhaust gas of a diesel engine.
Inspect the engine oil level periodically. When inspecting the engine oil, if the
engine oil level is close to or exceeds the “X” mark on the dipstick, replace the
engine oil.
Whenever the engine oil is replaced, the vehicles engine control unit needs to be
reset according to the instruction in Workshop Manual as soon as possible.
Otherwise the engine oil warning light may illuminate. Consult an expert repairer
to reset the engine control unit, we recommend an Authorised Mazda Repairer.
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD