2013 MAZDA MODEL CX-5 ignition

3
Before Driving
ON/OFF button Indicator light
Close
OpenLeft rear
window
Right rear windowFront
passenger's
window
Driver's window
Master control switches
Mirror switch
Centre position
Outside Mirrors
1. Rotate the mirror switch to the left or
right to choose the left or right side
mirror.
2. Press the mirror switch in the
appropriate direction.
For details, refer to Section 3, “Mirrors” or “Windows”.
Rearview Mirror
Auto-dimming mirror
The auto-dimming mirror automatically reduces
glare of headlights from cars at the rear when the
ignition is switched ON.
Press the ON/OFF button to cancel the automatic
dimming function. The indicator light will turn off.
To reactivate the automatic dimming function, press the
ON/OFF button. The indicator light will illuminate.
Operation of the Power Windows
Each passenger window can also be operated using the master control switches on
the driver's door.
To open the window to the desired position, lightly hold down the switch.
To close the window to the desired position, lightly pull up the switch.
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD

When Driving
5
Indicator light
Starting the Engine
For details, refer to Section 4, “Start/Stop Engine”.
(SKYACTIV-D 2.2)
• The starter does not rotate until the glow indicator light turns off.
• When starting the engine, do not release the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) until the glow indicator light in the
instrument cluster turns off and the engine starts, after pressing the push button
start.
1. Make sure the parking brake is on.
2. Continue to press the brake pedal firmly until
the engine has completely started.
3. (Manual transaxle)
Continue to press the clutch pedal firmly until
the engine has completely started.
(Automatic transaxle)
Put the vehicle in park (P). If you must restart the
engine while the vehicle is moving, shift into
neutral (N).
4. Press the push button start after both the KEY indicator
light (green) (if equipped) in the instrument cluster and
the push button start indicator light (green) illuminate.
• If the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle) is
released before the engine starts, depress the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) again and press the push button start to
start the engine.
• If the ignition is left switched ON for a long period of time without the engine
running after the glow plugs are warmed up, the glow plugs may warm up again
which will illuminate the glow indicator light.
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD

9
When Driving
Higher sensitivity
Less sensitivitySwitch
Centre
position
Lock-release button
For details, refer to Section 4, “Transmission” or “Switches and Controls”.
Automatic Transaxle Controls
Operation of the Headlights
Without auto-light control With auto-light control
Operation of the Windscreen Wipers
With intermittent wiper With auto-wiper control
Single wipe cycle (mist)
Intermittent (With intermittent wiper)/
Auto control (With auto-wiper control)
Low speed Switch
PositionWiper operation
High speed
When the wiper lever
is in the
position, the rain
sensor senses the
amount of rainfall on
the windscreen and
turns the wipers on
or off automatically.
Various Lockouts:
Indicates that you must depress
the brake pedal and hold in the
lock-release button to shift (The
ignition must be switched ON).
Indicates the selector lever can be
shifted freely into any position.
Indicates that you must hold in
the lock-release button to shift.
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD