2013 MAZDA MODEL CX-5 clutch

When Driving
5
Indicator light
Starting the Engine
For details, refer to Section 4, “Start/Stop Engine”.
(SKYACTIV-D 2.2)
• The starter does not rotate until the glow indicator light turns off.
• When starting the engine, do not release the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) until the glow indicator light in the
instrument cluster turns off and the engine starts, after pressing the push button
start.
1. Make sure the parking brake is on.
2. Continue to press the brake pedal firmly until
the engine has completely started.
3. (Manual transaxle)
Continue to press the clutch pedal firmly until
the engine has completely started.
(Automatic transaxle)
Put the vehicle in park (P). If you must restart the
engine while the vehicle is moving, shift into
neutral (N).
4. Press the push button start after both the KEY indicator
light (green) (if equipped) in the instrument cluster and
the push button start indicator light (green) illuminate.
• If the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle) is
released before the engine starts, depress the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) again and press the push button start to
start the engine.
• If the ignition is left switched ON for a long period of time without the engine
running after the glow plugs are warmed up, the glow plugs may warm up again
which will illuminate the glow indicator light.
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD

6
When Driving
Engine stop Restart
Neutral position
(Manual transaxle)
Automatic transaxle
Automatic transaxle
For details, refer to Section 4, “Start/Stop Engine”.
Operation of i-stop Function
The i-stop (idling stop) function automatically stops the engine when the vehicle is
stopped at a traffic light or stuck in traffic after the engine has been warmed up
(SKYACTIV-G 2.0, SKYACTIV-G 2.5) or other times when the engine is not cold
(SKYACTIV-D 2.2), and then restarts the engine automatically to resume driving.
The system provides improved fuel economy, reduced exhaust gas emissions, and
eliminates idling noise while the engine is stopped.
(Manual transaxle)
2. Depress the brake pedal and then the clutch pedal, and bring the vehicle to a
complete stop.
3. After bringing the vehicle to a stop, shift the lever to the neutral position while
depressing the clutch pedal. The engine automatically stops after the clutch
pedal is released. The i-stop indicator light (green) illuminates while the i-stop
function is operating.
4. To restart the engine, depress the clutch pedal (i-stop indicator light (green)
turns off). 1.(Except European model)
The i-stop indicator light (green) illuminates when the i-stop conditions
are met while the vehicle is being driven.
The i-stop indicator light (green) illuminates if the i-stop function conditions
are met again while driving (except European model).
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD

Maintenance and Care
14
SKYACTIV-G 2.0 and SKYACTIV-G 2.5
SKYACTIV-D 2.2 Windscreen washer fluid reservoir
Engine oil-filler capBrake/Clutch fluid reservoir
BatteryFuse block
Engine oil dipstickEngine coolant reservoir Cooling system cap
Windscreen washer fluid reservoir
Engine oil-filler capBrake/Clutch fluid reservoir
BatteryFuse block
Engine oil dipstick Cooling system cap Engine coolant reservoir
Owner Maintenance Precautions
Routine Service
We highly recommend that these items be inspected daily, or at least every week.
• Engine Oil Level
• Engine Coolant Level
• Brake and Clutch Fluid Level
• Washer Fluid Level
• Battery Maintenance
• Tyre Inflation Pressure
For details, refer to Section 6, “Owner Maintenance”.
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD