2013 Lexus IS300h navigation system

105
1. BASIC OPERATION
IS300h/250_Navi_EE
3
NAVIGATION SYSTEM
1 Place the cursor over an icon.
2Select “Info”.
POI informationMemory point information
Destination information
Traffic information
Parking information
DISPLAYING
INFORMATION ABOUT THE
ICON WHERE THE CURSOR
IS SET
When the cursor is placed over an
icon on the map screen, the name bar
is displayed on the upper part of the
screen. If “Info” appears on the right
side of the name bar, the detailed in-
formation can be displayed.

107
1. BASIC OPERATION
IS300h/250_Navi_EE
3
NAVIGATION SYSTEM
4. TRAFFIC AND PARKING INFORMATION
*: Can only be used when receiving RDS-
TMC or TPEG (Transport Protocol Ex-
perts Group) information. Depending on
the country or area, receiving RDS-TMC
and TPEG information may not be possi-
ble.
1Press the “MENU” button on the
Remote Touch.
2Select “Info”.
Traffic information, traffic predic-
tion information and parking lot in-
formation can be viewed.
The following 3 methods are avail-
able to receive the above information:
• RDS-TMC* (Radio Data System-
Traffic Message Channel) using FM
signals
• TPEG*-TEC (Traffic Event Com-
pact), TPEG*-TFP (Traffic Flow
Prediction) and TPEG*-PKI (Live
Parking Information) using DAB
• TPEG*-TEC, TPEG*-TEP and
TPEG*-PKI via the internet by
using Wi-Fi
® or a cellular phone
For detailed information about con-
nection methods for a Wi-Fi® device
or cellular phone: P.48, 67
Receiving information using a cellu-
lar phone
• In order to use this service, a
Bluetooth
® DUN/PAN compatible
cellular phone with sufficient net-
work coverage and a SIM card with
a contract that allows access to the
internet are required.
• When using this service, depending
on your telephone subscription,
some related fees might apply.
• When a cellular phone is used in a
roaming situation (when outside the
geographical coverage area of
mobile network provider) connec-
tion fees will be more expensive.
DISPLAYING TRAFFIC AND
TRAFFIC PREDICTION
INFORMATION

109
1. BASIC OPERATION
IS300h/250_Navi_EE
3
NAVIGATION SYSTEM
4Check that the traffic information is
displayed.
“Map”: Select to display around traffic
event information.
“Detail”: Select to display detailed traf-
fic event information.
URGENT TRAFFIC EVENTS
NOTIFICATIONTRAFFIC INFORMATION ON
THE MAP SCREEN
On map screen
On motorway screen
If urgent traffic information is de-
tected around the current position, a
pop-up message is displayed on the
screen. Select “Yes” to display the
traffic information.
Traffic information such as traffic
congestion, accidents and road clo-
sures are displayed on the map
screen. (For setting traffic informa-
tion icons displayed on the screen:
P.175)

111
1. BASIC OPERATION
IS300h/250_Navi_EE
3
NAVIGATION SYSTEM
1Press the “MENU” button on the
Remote Touch.
2Select “Info”.
3Select “Parking information”.
4Select the desired parking lot.PARKING INFORMATION
The location and available spaces of
parking lots can be checked. These
parking lots can also be set as a des-
tination.
No.Information/Function
Parking lot name
Parking fee
Distance from current position
Sort (P.112)
Parking lot search (P.113)

113
1. BASIC OPERATION
IS300h/250_Navi_EE
3
NAVIGATION SYSTEM
1Select “Search area”.
2Select the location or area to be
searched.
SEARCHING FOR PARKING
LOT
No.Function
A search around the current posi-
tion can be performed.
A search around the currently set
destination can be performed.
The size of the search area around
the set location can be selected.
Select to change pages.

114
IS300h/250_Navi_EE
2. DESTINATION SEARCH
1. DESTINATION SEARCH SCREEN
The “Destination” screen enables you to search for a destination. Press the
“MENU” button on the Remote Touch. Select “Nav” and then “Menu” to dis-
play the navigation menu screen. Then select “Destination” to display the
“Destination” screen.
No.FunctionPage
Select to search for a destination by address.118
Select to search for a destination by point of interest.121
Select to search for a destination by online search.
The navigation system can use an internet search engine to set a
destination using the most up to date information. After setting
the search engine to be used for “Online search”, the screen but-
ton name will change to the search engine’s logo.
379
Select to change the search area.117

115
2. DESTINATION SEARCH
3
NAVIGATION SYSTEM
IS300h/250_Navi_EE
Select to search for a destination by the last displayed map.122
Select to search for a destination by memory points.122
Select to search for a destination from previously set destinations.123
Select to search for a destination by intersection.124
Select to search for a destination by motorway entrance/exit.125
Select to search for a destination by UK/NL postal code.128
Select to search for a destination by coordinates.126
Select to search for a destination by telephone number.126
Select to search for a destination by point of interest near cursor.127
Select to set a destination by home.117
Select to set a destination by quick access.118
No.FunctionPage

117
2. DESTINATION SEARCH
3
NAVIGATION SYSTEM
IS300h/250_Navi_EE
1Display the “Destination” screen.
(P.116)
2Select the search area button.
3Enter the search area name and se-
lect “OK”.
4Select the desired search area.
1Display the “Destination” screen.
(P.116)
2Select “Home”.
SELECTING THE SEARCH
AREA
INFORMATION
Included countries may be different
by map version or sales countries.
For map database information and
updates: P. 1 8 5
SETTING HOME AS
DESTINATION
To use this function, it is necessary to
register a home address. (P.150)