2013 Lexus GS300h light

1072. Instrument cluster
2
Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)“READY” indicator
(P. 246)EV indicator (P. 8 2 )
Cruise control “SET”
indicator (P. 298)Cruise control indicator
(P. 298)
(if
equipped)
LKA (Lane-Keeping
Assist) indicator
(P. 337)
(if
equipped)
Radar cruise control
indicator (P. 302)
(if
equipped)
Lexus parking assist-
sensor indicator (P.
346)Parking brake indicator
(P. 266)
*1
(if
equipped)
“AFS OFF” indicator
(P. 274)
*1
Brake hold standby indi-
cator (P. 269)
*1, 2Slip indicator
(P. 396)*1Brake hold operated
indicator (P. 269)
*1
VSC OFF indicator
(P. 397)
*4
(if
equipped)
BSM (Blind Spot Moni-
tor) outside rear view
mirror indicators (P.
414)
*1, 3
(if
equipped)
“PCS” warning light
(P. 404)
*1
“PASSENGER AIR BAG” indica-
tor (P. 5 6 )

1082. Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)
*1: These lights turn on when the power switch is turned to ON mode to indi-
cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if the lights do not come on, or turn off. Have the vehicle
inspected by any authorized Lexus dealer or repairer, or another duly qual-
ified and equipped professional.
*2: The light flashes to indicate that the system is operating.
*3: The light comes on when the system is turned off. The light flashes faster
than usual to indicate that the system is operating.
*4: In order to confirm operation, the BSM outside rear view mirror indicators
illuminate in the following situations:
• When the power switch is turned to ON mode while the BSM main
switch is set to ON.
• When the BSM main switch is set to ON while the power switch is in
ON mode.
If the system is functioning correctly, the BSM outside rear view mirror
indicators will turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not
turn off, there may be a malfunction with the system.
If this occurs, have the vehicle inspected by any authorized Lexus dealer
or repairer, or another duly qualified and equipped professional.
CAUTION
If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning light not
come on when you start the hybrid system, this could mean that these sys-
tems are not available to help protect you in an accident, which could result
in death or serious injury. Have the vehicle inspected by any authorized
Lexus dealer or repairer, or another duly qualified and equipped profes-
sional immediately if this occurs.

1112. Instrument cluster
2
Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)
Switches between odometer and
trip meter displays. When the
trip meter is displayed, pressing
and holding the button will reset
the trip meter.
The brightness of the instrument panel lights can be adjusted.
Darker
Brighter
Changing the display
Instrument panel light control
1
2

1122. Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)
The meters and display illuminate when
The power switch is in ON mode.
Instrument panel brightness adjustment
The instrument panel brightness levels when the tail lights are on and off can
be adjusted individually. However, when the surroundings are bright (day-
time, etc.), turning on the tail lights will not change the instrument panel
brightness.
Limitation of brightness adjustment
The brightness of the instrument panel lights is automatically adjusted based
on the light sensor detecting how bright the surroundings are. However, if the
instrument panel brightness has been manually set to either the brightest or
darkest setting, the automatic adjustment will not be performed.
Hybrid System Indicator
Hybrid System Indicator is displayed when the driving mode is other than
the sport mode.
By keeping the indicator needle within Eco area, more Eco-friendly driving
can be achieved.
Charge area indicates regeneration* status. Regenerated energy will be
used to charge the battery.
*: When used in this manual, “regeneration” refers to the conversion of
energy created by the movement of the vehicle into electrical energy. Charge area
Shows regenerative charging.
Hybrid Eco area
Shows that gasoline engine power is
not being used very often.
The gasoline engine will automatically
stop and restart under various condi-
tions.
Eco area
Shows that the vehicle is being driven
in an Eco-friendly manner.
Power area
Shows that an Eco-friendly driving
range is being exceeded (during full
power driving etc.)
1
2
3
4

1202. Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)
System check display
After turning the power switch to ON mode, “SYSTEM CHECK” is dis-
played while system operation is checked.
Outside temperature display
In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change.
When stopped, or driving at low speeds (less than 20 km/h [12 mph])
When the outside temperature has changed suddenly (at the entrance/exit of
a garage, tunnel, etc.)
Setting display automatic cancelation
In the following situations, setting display in which the settings can be
changed through the “DISP” button will automatically be turned off.
When a warning message appears while the setting display is displayed
When the vehicle begins to move while the setting display is displayed
Tire inflation pressure (if equipped)
It may take a few minutes to display the tire inflation pressure after the
power switch is turned to ON mode. It may also take a few minutes to dis-
play the tire inflation pressure after inflation pressure has been adjusted.
“---” may be displayed if the tire position information cannot be determined
due to unfavorable radio wave conditions.
Tire inflation pressure changes with temperature. The displayed values may
also be different from the values measured using a tire pressure gauge.
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
Customization
Setting of available languages can be changed. (Customizable features: P.
944)

1322. Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)These images are examples only, and may vary slightly from actual condi-
tions.
Remote Touch screenMulti-information dis-
play
When the vehicle is pow-
ered by the electric motor
(traction motor)
When the vehicle is pow-
ered by both the gasoline
engine and the electric
motor (traction motor)
When the vehicle is pow-
ered by the gasoline
engine
When the vehicle is
charging the hybrid bat-
tery
(traction battery)
When there is no energy
flow
Hybrid battery (traction
battery) status
LowFullLowFull

1342. Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)
Trip information
If the “Past record” screen is displayed, select “Trip informa-
tion”.
Resetting the consumption
data
Fuel consumption in the
past 15 minutes
Regenerated energy in the
past 15 minutes
One symbol indicates 50
Wh. Up to 5 symbols are
shown.
Displays the average vehi-
cle speed since the hybrid
system was started.
Displays the elapsed time
since the hybrid system was
started.
Cruising range (P. 136)
Average fuel consumption for
the past 15 minutes is divided
by color into past averages and
averages attained since the
power switch was last turned to
ON mode. Use the displayed
average fuel consumption as a
reference.
The image is an example only,
and may vary slightly from
actual conditions.
1
2
3
4
5
6

1352. Instrument cluster
2
Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)
Past record
If the “Trip information” screen is displayed, select “Past
record”.
Updating the average fuel
consumption data
Resetting the past record
data
Best recorded fuel con-
sumption
Average fuel consumption
Previous fuel consumption
record
The average fuel consumption
history is divided by color into
past averages and the average
fuel consumption since the last
updated. Use the displayed
average fuel consumption as a
reference.
The image is an example only,
and may vary slightly from
actual conditions.
1
2
3
4
5