2013 Lexus GS300h light

861-2. Hybrid system
GS450h_300h_OM_OM30D53E_(EE)
If a warning light comes on, a warning message is displayed, or the 12-volt
battery is disconnected
The hybrid system may not start. In that case, try to start the system again. If
the “READY” indicator does not come on, contact any authorized Lexus
dealer or repairer, or another duly qualified and equipped professional.
Running out of fuel
When the vehicle has run out of fuel and the hybrid system cannot be started,
refuel the vehicle with at least enough gasoline to make the low fuel level
warning light (P. 833) go off. If there is only a small amount of fuel, the
hybrid system may not be able to start. (The minimum amount of fuel to add
to make the low fuel level warning light go out is about 9.9 L [2.6 gal., 2.2
Imp.gal.], when the vehicle is on a level surface. This value may vary when
the vehicle is on a slope.)
Electromagnetic waves
High voltage parts and cables on the hybrid vehicles incorporate electro-
magnetic shielding, and therefore emit approximately the same amount of
electromagnetic waves as conventional gasoline powered vehicles or home
electronic appliances.
Your vehicle may cause sound interference in some third party-produced
radio parts.
Hybrid battery (traction battery)
The hybrid battery (traction battery) has a limited service life. The lifespan of
the hybrid battery (traction battery) can change in accordance with driving
style and driving conditions.
Declaration of conformity
This model conforms to hydrogen emissions according to regulation ECE100
(Battery electric vehicle safety).

91
1 1-3. Theft deterrent system
GS450h_300h_OM_OM30D53E_(EE)
For safety and security
Immobilizer system
The indicator light flashes after
the power switch has been turned
off to indicate that the system is
operating.
The indicator light stops flashing
after the power switch has been
turned to ACCESSORY or ON
mode to indicate that the system
has been canceled.
System maintenance
The vehicle has a maintenance-free type immobilizer system.
Conditions that may cause the system to malfunction
If the grip portion of the key is in contact with a metallic object
If the key is in close proximity to or touching a key to the security system
(key with a built-in transponder chip) of another vehicle
The vehicle’s keys have built-in transponder chips that prevent the
hybrid system from starting if a key has not been previously regis-
tered in the vehicle’s on-board computer.
Never leave the keys inside the vehicle when you leave the vehicle.
This system is designed to help prevent vehicle theft but does not
guarantee absolute security against all vehicle thefts.

97
1 1-3. Theft deterrent system
GS450h_300h_OM_OM30D53E_(EE)
For safety and security
Alarm
The alarm uses light and sound to give an alert when an intrusion is
detected.
The alarm is triggered in the following situations when the alarm is
set:
A locked door is unlocked or opened in any way other than using
the entry function or wireless remote control. (The door will lock
again automatically.)
A trunk is opened in any way other than using the entry function,
wireless remote control or mechanical key.
The hood is opened.
The tilt sensor detects a change of vehicle inclination. (if
equipped)
Close the doors, trunk and hood,
and lock all the doors using the
entry function or wireless remote
control. The system will be set
automatically after 30 seconds.
The indicator light changes from
being on to flashing when the sys-
tem is set.
: If equipped
The alarm
Setting the alarm system

1011-3. Theft deterrent system
1
GS450h_300h_OM_OM30D53E_(EE)
For safety and security
Canceling and automatic re-enabling of the intrusion sensor and tilt sensor
The alarm will still be set even when the intrusion sensor and tilt sensor are
canceled.
After the intrusion sensor and tilt sensor are canceled, pressing the power
switch or unlocking the doors using the entry function, wireless remote con-
trol or mechanical key will re-enable the intrusion sensor and tilt sensor.
The intrusion sensor and tilt sensor will automatically be re-enabled when
the alarm system is deactivated.
Intrusion sensor detection considerations
The sensor may trigger the alarm in the following situations:
Places with extreme vibrations or noises, or situations in which the vehicle
is subject to repeated impacts or vibrations:
• When parked in a parking garage
• When the vehicle is transported by a ferry, trailer, train, etc.
• When ice adhering to the vehicle is removed
• When the vehicle is in an automatic or high-pressure car wash
• When in a hail or lightning storm
A window or the moon roof is open.
In this case, the sensor may detect the
following:
• Wind or the movement of objects
such as leaves and insects inside the
vehicle
• Ultrasonic waves emitted from
devices such as the intrusion sensors
of other vehicles
• The movement of people outside the
vehicle
Unstable items, such as dangling acces-
sories or clothes hanging on the coat
hooks, are in the vehicle.

103
2Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)2. Instrument cluster
Warning lights
and indicators.................. 104
Gauges and meters ............ 109
Multi-information display..114
Head-up display ................ 122
Energy monitor/
consumption screen ........ 130

1042. Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)
Warning lights and indicators
Instrument cluster
The units used on the speedometer may differ depending on the target
region.
Center panel
The warning lights and indicators on the instrument cluster, center
panel and outside rear view mirrors inform the driver of the status
of the vehicle’s various systems.
For the purpose of explanation, the following illustration displays
all warning lights and indicators illuminated.

1052. Instrument cluster
2
Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)
Outside rear view mirrors (vehicles with BSM)
Warning lights inform the driver of malfunctions in the indicated
vehicle’s systems.
Warning lights
*1Brake system warning
light
(P. 830)*1, 2
(if
equipped)
“PCS” warning light
(P. 832)
*1Charging system warn-
ing
light (P. 8 3 1 )*1Slip indicator
(P. 832)
*1
Malfunction indicator
lamp (P. 831)
*1, 2
(if
equipped)
“AFS OFF” indicator
(P. 832)
*1
SRS warning light
(P. 831)
*1, 2
(if
equipped)
Brake hold operated
indicator (P. 832)
*1ABS warning light
(P. 831)*2Parking brake indicator
(P. 832)
*1Electric power steering
system warning light
(P. 832)*1Brake system warning
light (P. 8 3 2 )

1062. Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)
*1: These lights turn on when the power switch is turned to ON mode to indi-
cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if the lights do not come on, or turn off. Have the vehicle
inspected by any authorized Lexus dealer or repairer, or another duly qual-
ified and equipped professional.
*2: The light flashes to indicate a malfunction.
The indicators inform the driver of the operating state of the vehi-
cle’s various systems.
Open door warning light
(P. 833)*1Master warning light
(P. 833)
Low fuel level warning
light (P. 8 3 3 )
*1
(if
equipped)
Tire pressure warning
light
(P. 834)
Seat belt reminder light
(P. 833)
Indicators
Turn signal indicator
(P. 264)
(if
equipped)
Automatic High Beam
indicator (P. 277)
Tail light indicator
(P. 272)
(if
equipped)
Front fog light indicator
(P. 283)
Headlight high beam
indicator (P. 272)Rear fog light indicator
(P. 283)