2013 Lexus GS300h phone

4535-1. Remote Touch screen
5
Interior features
GS450h_300h_OM_OM30D53E_(EE)
Set up screen
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
You can change the Remote Touch screen to your desired settings.
Press the “MENU” button on the Remote Touch, then select
“Setup” on the “Menu” screen.
Owners of models equipped with a navigation system should refer
to the “Navigation System Owner’s Manual”.
Vehicles without a navigation
systemVehicles with a navigation
system
SwitchPage
“General”P. 454/
Navigation System Owner’s Manual
“Voice”P. 467/
Navigation System Owner’s Manual
“Navigation”Navigation System Owner’s Manual
“Vehicle”P. 468/
Navigation System Owner’s Manual
“Telephone”P. 4 6 9
“Bluetooth*”P. 4 6 9
“Audio”P. 4 7 0
“Info”Navigation System Owner’s Manual

4655-1. Remote Touch screen
5
Interior features
GS450h_300h_OM_OM30D53E_(EE)
Delete personal data
This function is not available while driving.
Select “Delete personal data” on the “General settings” screen.
Select “Delete”.
Check carefully beforehand, as
data cannot be retrieved once
deleted.
Select “Yes”.
The following personal data can be deleted or returned to their default set-
tings:
• Maintenance conditions
*
• Maintenance information off setting*
• Memory point*
• Password settings for backing up and copying memory points*
•Areas to avoid*
• Previous points*
• Route guidance*
•Route trace*
• Phonebook data
• Call history data
• Speed dial data
•Bluetooth
® phone data
• Phone sound settings
• Phone display settings
• Message settings
• Audio setting
•Bluetooth
® audio setting
• Search engine settings
• Opening image data
• Screen off image data
*: Vehicles with a navigation system.
1
2
3

4695-1. Remote Touch screen
5
Interior features
GS450h_300h_OM_OM30D53E_(EE)
Select “Telephone” on the “Setup” screen.
Sound settings
Detailed information: P. 6 4 6
Phonebook settings
Detailed information: P. 6 4 8
Message settings
Detailed information: P. 6 6 4
Telephone display settings
Detailed information: P. 6 6 8
Select “Bluetooth*” on the “Setup” screen.
Registered devices
Detailed information: P. 6 7 2
Selecting a Bluetooth® phone
Detailed information: P. 6 7 8
Selecting portable player
Detailed information: P. 6 7 9
Detailed Bluetooth® settings
Detailed information: P. 6 8 0
Communication settings
Refer to “Navigation System
Owner’s Manual”.
*: Bluetooth is a registered trade-
mark of Bluetooth SIG, Inc.
Telephone settings
1
2
3
4
Bluetooth® settings
1
2
3
4
5

4725-1. Remote Touch screen
GS450h_300h_OM_OM30D53E_(EE)
Microphone

4755-1. Remote Touch screen
5
Interior features
GS450h_300h_OM_OM30D53E_(EE)
Recognizable speech commands and their actions are shown below.
For devices that are not installed in the vehicle, the related com-
mands will not be displayed in the “Shortcuts” screen. Also,
according to conditions, other commands may not be displayed
in the “Shortcuts” screen.
Voice recognition language can be changed. (P. 456)
Commands that have a “O” in the “Shortcuts” column in the fol-
lowing table can be recognized from the “Shortcuts” screen.
Calling a Telephone (P. 630)
Command list
CommandActionShortcuts
“Call ”
Calls made by saying a name from
the phonebook.
For example: Say “Call John Smith”,
“Call John Smith, mobile” etc.
O
“Dial ”
Calls made by saying the Telephone
number.
For example: Say “Dial
0123456789” etc.
O

4785-1. Remote Touch screen
GS450h_300h_OM_OM30D53E_(EE)
When using the microphone
It is unnecessary to speak directly into the microphone when giving a com-
mand.
Wait for the confirmation beep before speaking a command.
Speech commands may not be recognized if:
• Spoken too quickly.
• Spoken at a low or high volume.
• The roof or windows are open.
• Passengers are talking while speech commands are spoken.
• The air conditioning speed is set high.
• The air conditioning vents are turned towards the microphone.
In the following conditions, the system may not recognize the command
properly and using speech commands may not be possible:
• The command is incorrect or unclear. Note that certain words, accents or
speech patterns may be difficult for the system to recognize.
• There is excessive background noise, such as wind noise.
When searching for a track
A USB memory or iPod must be connected to enable track searching and
playback. (P. 579, 590)
When a USB memory or iPod is connected, recognition data is created so
tracks can be searched using speech commands.
Recognition data is updated under the following conditions:
• When the USB memory or iPod data has changed.
• When the voice recognition language is changed. (P. 456)
While the recognition data is being created or being updated, a track search
cannot be performed using a speech command.
When “Play music” is dimmed in the “Shortcuts” screen, it is not possible
to search for a track using a speech command. In this situation, reduce the
amount of music data in the USB memory or iPod and update the recogni-
tion data to enable searching by speech command.

5045-3. Using the audio system
GS450h_300h_OM_OM30D53E_(EE)
Using cellular phones
Interference may be heard through the audio system’s speakers if a cellular
phone is being used inside or close to the vehicle while the audio system is
operating.
When using the Remote Touch screen
Dimmed screen buttons cannot be operated.
Ta b
Select or , located either side of the screen tabs, to display tabs from
the previous or next page.
About Dolby
Manufactured under license from Dolby Laboratories. Dolby and the double-
D symbol are trademarks of Dolby Laboratories.
CAUTION
Certification for the disc player
This product is a Class 1 laser product classified under the Safety of laser
products, IEC 60825-1:2007, and contains a class 1 M laser module. To
ensure continued safety, do not remove any covers or attempt to gain access
to the inside of the product. Refer all servicing to qualified personnel.
CLASS 1 LASER PRODUCT
CAUTION - CLASS 1 M VISIBLE
AND INVISIBLE LASER RADIA-
TION WHEN OPEN, DO NOT VIEW
DIRECTLY WITH OPTICAL
INSTRUMENTS.

5065-3. Using the audio system
GS450h_300h_OM_OM30D53E_(EE)
Open source license
This product uses the following open source software.
T- K e r n e l
This Product uses the Source Code of T-Kernel under T-License granted
by the T-Engine Forum (www.t-engine.org
).
C Library
This product includes software developed by the University of California,
Berkeley and its contributors. This product includes software developed by
the University of California, Lawrence Berkeley Laboratory.
Copyright © 1982, 1985, 1993 The Regents of the University of California.
All rights reserved.
Copyright © 1982, 1986, 1993 The Regents of the University of California.
All rights reserved.
Copyright © 1982, 1986, 1989, 1993 The Regents of the University of
California. All rights reserved.
© UNIX System Laboratories, Inc. All or some portions of this file are
derived from material licensed to the University of California by American
Telephone and Telegraph Co. or Unix System Laboratories, Inc. and are
reproduced herein with the permission of UNIX System Laboratories, Inc.
Copyright © 1982, 1986, 1991, 1993, 1994 The Regents of the University of
California. All rights reserved.
© UNIX System Laboratories, Inc. All or some portions of this file are
derived from material licensed to the University of California by American
Telephone and Telegraph Co. or Unix System Laboratories, Inc. and are
reproduced herein with the permission of UNIX System Laboratories, Inc.
Copyright © 1983, 1990, 1993 The Regents of the University of California.
All rights reserved.
© UNIX System Laboratories, Inc. All or some portions of this file are
derived from material licensed to the University of California by American
Telephone and Telegraph Co. or Unix System Laboratories, Inc. and are
reproduced herein with the permission of UNIX System Laboratories, Inc.
Copyright © 1983, 1993 The Regents of the University of California. All
rights reserved.