2013 Lexus GS300h engine oil

7426-3. Do-it-yourself maintenance
GS450h_300h_OM_OM30D53E_(EE)
Adding engine oil
If the oil level is below or near the low level mark, add engine oil
of the same type as that already in the engine.
Make sure to check the oil type and prepare the items needed
before adding oil.
Remove the oil filler cap by turning it counterclockwise.
Add engine oil slowly, checking the dipstick.
Install the oil filler cap by turning it clockwise.
GS300hGS450h
Engine oil selectionP. 9 3 1
Oil quantity (Low  Full) 1.5 L (1.6 qt., 1.3 Imp.qt.)
Items Clean funnel
1
2
3

743 6-3. Do-it-yourself maintenance
6
Maintenance and care
GS450h_300h_OM_OM30D53E_(EE)
Engine oil consumption
A certain amount of engine oil will be consumed while driving. In the fol-
lowing situations, oil consumption may increase, and engine oil may need to
be refilled in between oil maintenance intervals.
When the engine is new, for example directly after purchasing the vehicle
or after replacing the engine
If low quality oil or oil of an inappropriate viscosity is used
When driving at high engine speeds or with a heavy load, when towing, or
when driving while accelerating or decelerating frequently
When leaving the engine idling for a long time, or when driving frequently
through heavy traffic
CAUTION
Used engine oil
Used engine oil contains potentially harmful contaminants which may
cause skin disorders such as inflammation and skin cancer, so care should
be taken to avoid prolonged and repeated contact. To remove used engine
oil from your skin, wash thoroughly with soap and water.
Dispose of used oil and filters only in a safe and acceptable manner. Do
not dispose of used oil and filters in household trash, in sewers or onto the
ground.
Call any authorized Lexus dealer or repairer, or another duly qualified and
equipped professional, service station or auto parts store for information
concerning recycling or disposal.
Do not leave used engine oil within the reach of children.
NOTICE
To prevent serious engine damage
Check the oil level on a regular basis.
When replacing the engine oil
Be careful not to spill engine oil on the vehicle components.
Avoid overfilling, or the engine could be damaged.
Check the oil level on the dipstick every time you refill the vehicle.
Be sure the engine oil filler cap is properly tightened.

8417-2. Steps to take in an emergency
7
When trouble arises
GS450h_300h_OM_OM30D53E_(EE)
A buzzer sounds and a warning message is shown on the multi-
information display. The following warning indicates the possibil-
ity of damage to the vehicle that may lead to an accident. Immedi-
ately stop the vehicle in a safe place and contact any authorized
Lexus dealer or repairer, or another duly qualified and equipped
professional.
Stop the vehicle immediately.
Wa r n i n g m e s s a g eDetails
Indicates abnormal engine oil pressure
The warning light may come on if the engine
oil pressure is too low.
Indicates a malfunction in the hybrid system
or

8537-2. Steps to take in an emergency
7
When trouble arises
GS450h_300h_OM_OM30D53E_(EE)
*: For the EV drive mode operating conditions: P. 254
Indicates that the EV
drive mode is not avail-
able
*
The reason the EV
drive mode is not
available (the vehi-
cle is idling, battery
charge is low, speed
is higher than the EV
drive mode operat-
ing speed range,
accelerator pedal is
depressed too much)
may be displayed.
Use the EV drive mode
when it becomes avail-
able.
Indicates that the EV
drive mode has been
automatically can-
celed
*
The reason the EV
drive mode is not
available (the battery
charge is low, speed
is higher than the EV
drive mode operat-
ing speed range,
accelerator pedal is
depressed too much)
may be displayed.
Drive the vehicle for a
while.
Indicates that engine
oil level is lowCheck the level of
engine oil, and add if
necessary.
Wa r n i n g m e s s a g eDetailsCorrection procedure

8567-2. Steps to take in an emergency
GS450h_300h_OM_OM30D53E_(EE)
(If equipped)
Indicates that the LKA
(Lane-Keeping Assist)
system detects no-
handed driving (while
the lane keeping assist
function is operating)
The warning buzzer
sounds twice.
Grip the steering wheel
firmly.
(If equipped)
Indicates that the Blind
Spot Monitor sensors
or the surrounding area
on the bumper is dirty
or covered with ice
Clean the sensor and its
surrounding area on the
bumper.
Indicates that the
hybrid system has
overheated
This message may be
displayed when driv-
ing under severe
operating condi-
tions. (For example,
when driving up a
long steep hill.)
Stop and check.
(P. 917)
Indicates that the
hybrid system output is
limited because the
engine oil is over-
heatedDrive the vehicle at a
safe speed until the
warning message dis-
appears.
Wa r n i n g m e s s a g eDetailsCorrection procedure

9308-1. Specifications
GS450h_300h_OM_OM30D53E_(EE)
*: The engine oil capacity is a reference quantity to be used when changing
the engine oil. Warm up the engine and turn off the hybrid system, wait
more than 5 minutes, and check the oil level on the dipstick.
Hybrid battery (traction battery)
Ty p eNickel-Metal hydride battery
Vo l t a g e7.2 V/module
Capacity6.5 Ah (3HR)
QuantityGS300h32 modules
GS450h40 modules
Overall voltageGS300h230.4 V
GS450h288 V
Lubrication system
Oil capacity
(Drain and refill 
reference
*)
With filter
Without filter
GS300hGS450h
4.5 L (4.8 qt., 4.0 lmp.
qt.)
4.1 L (4.3 qt., 3.6 lmp.
qt.)6.2 L (6.6 qt., 5.5
Imp.qt.)
5.9 L (6.2 qt., 5.2
Imp.qt.)

931
8 8-1. Specifications
Vehicle specifications
GS450h_300h_OM_OM30D53E_(EE)
Engine oil selection
“Toyota Genuine Motor Oil” is used in your Lexus vehicle.
Lexus recommends the use of approved “Toyota Genuine Motor
Oil”. Another motor oil of matching quality can also be used.
Oil grade:
0W-20, 5W-20, 5W-30 and 10W-30:
API grade SL “Energy-Conserving”, SM “Energy-Conserving”
or SN “Resource-Conserving”; or ILSAC multigrade engine oil
15W-40 and 20W-50:
API grade SL, SM or SN multigrade engine oil
Recommended viscosity (SAE):
SAE 0W-20 is filled into your
Lexus vehicle at manufactur-
ing, and the best choice for
good fuel economy, and good
starting in cold weather.
If SAE 0W-20 oil is not avail-
able, SAE 5W-30 oil may be
used. However, it should be
replaced with SAE 0W-20 at
the next oil change.
If you use SAE 10W-30 or a
higher viscosity engine oil in
extremely low temperatures,
the engine may become diffi-
cult to start, so SAE 0W-20,
5W-20 or 5W-30 engine oil is
recommended.
Temperature range anticipated
before next oil changePreferred

9328-1. Specifications
GS450h_300h_OM_OM30D53E_(EE)
Oil viscosity (0W-20 is explained here as an example):
• The 0W in 0W-20 indicates the characteristic of the oil which
allows cold startability. Oils with a lower value before the W
allow for easier starting of the engine in cold weather.
• The 20 in 0W-20 indicates the viscosity characteristic of the
oil when the oil is at high temperature. An oil with a higher
viscosity (one with a higher value) may be better suited if the
vehicle is operated at high speeds, or under extreme load con-
ditions.
How to read oil container labels:
Either or both API registered marks are added to some oil con-
tainers to help you select the oil you should use.
API Service Symbol
Top portion: “API SERVICE
SN” means the oil quality desig-
nation by American Petroleum
Institute (API).
Center portion: “SAE 0W-20”
means the SAE viscosity grade.
Lower portion: “Resource-Con-
serving” means that the oil has
fuel-saving and environmental
protection capabilities.
ILSAC Certification Mark
The International Lubricant
Specification Advisory Com-
mittee (ILSAC) Certification
Mark is displayed on the front
of the container.
1
2