2013 Lexus CT200h operating temp

581-1. For safe use
CT200h_OM_OM76102E_(EE)
Safety information for children
It is recommended that children sit in the rear seats to avoid accidental
contact with the shift lever, wiper switch etc.
Use the rear door child-protector lock or the window lock switch to
avoid children opening the door while driving or operating the power
window accidentally. (P. 136, 178)
Do not let small children operate equipment which may catch or pinch
body parts, such as the power window, hood, back door, seats etc.
Observe the following precautions when children are in the vehicle.
Use a child restraint system appropriate for the child, until the child
becomes large enough to properly wear the vehicle’s seat belt.
WA R N I N G
Never leave children unattended in the vehicle, and never allow children to
have or use the key.
Children may be able to start the vehicle or shift the vehicle into neutral. There
is also a danger that children may injure themselves by playing with the win-
dows, the moon roof (if equipped) or other features of the vehicle. In addition,
heat build-up or extremely cold temperatures inside the vehicle can be fatal to
children.

1773-4. Adjusting the steering wheels and mirrors
3
Operation of each component
CT200h_OM_OM76102E_(EE)
WA R N I N G
When driving the vehicle
Observe the following precautions while driving.
Failing to do so may result in loss of control of the vehicle and cause an acci-
dent, resulting in death or serious injury.
Do not adjust the mirrors while driving.
Do not drive with the mirrors folded.
Both the driver and passenger side mirrors must be extended and properly
adjusted before driving.
When a mirror is moving
To avoid personal injury and mirror malfunction, be careful not to get your
hand caught by the moving mirror.
When the mirror defoggers are operating
Do not touch the rear view mirror surfaces, as they can become very hot and
burn you.
NOTICE
Handling the rain clearing mirror (type B only)
The rain clearing effect is finite. Observe the Following precautions in order to
retain the rain-clearing properties of the mirrors:
When using water repellent, oil film remover, wax, or any other car mainte-
nance product that contains silicone, pay full attention not to adhere it to the
mirror surface.
Do not wipe the mirror surface by using any cloth smeared with sand, oil film
remover, abrasive agent, or any other thing that may scratch the mirror sur-
face.
When the mirrors become iced up, remove the ice by applying warm water, or
operating the outside rear view mirror defoggers, etc. But, do not attempt to
scrape the ice off by using the plastic plate, etc.
When washing your vehicle using car shampoo with water repellent effect,
rinse the mirror surface with a lot of water, and remove the water drops by
using a clean and soft cloth.

1994-2. Driving procedures
4
Driving
CT200h_OM_OM76102E_(EE)
When the ambient temperature is low, such as during winter driving conditions
When starting the hybrid system, the flashing time of the “READY” indicator
may be long. Leave the vehicle as it is until the “READY” indicator is steady on,
as steady means the vehicle is able to move.
Conditions affecting operation
P. 145
Note for the entry function
P. 146
If the hybrid system does not start
The immobilizer system may not have been deactivated. (P. 87)
Contact any authorized Lexus dealer or repairer, or another duly qualified and
equipped professional.
When the power switch indicator flashes in amber
The system may be malfunctioning. Have the vehicle inspected by any autho-
rized Lexus dealer or repairer, or another duly qualified and equipped profes-
sional immediately.
If the “READY” indicator does not come on
In the event that the “READY” indicator does not come on even after performing
the proper procedures for starting the vehicle, contact any authorized Lexus
dealer or repairer, or another duly qualified and equipped professional immedi-
ately.
If the hybrid system is malfunctioning
P. 580
If the electronic key battery is depleted
P. 530
Operation of the power switch
When operating the power switch, one short, firm press is enough. If the switch
is pressed improperly, the hybrid system may not start or the power switch
mode may not change. It is not necessary to press and hold the switch.
If attempting to restart the hybrid system immediately after turning the power
switch off, the hybrid system may not start in some cases. After turning the
power switch off, please wait a few seconds before restarting the hybrid system.
Automatically P position selection function
P. 207
When the P position control system malfunctions
The power switch will not be able to be turned off. In such a case, the switch can
be turned off after applying the parking brake.
Have the vehicle inspected by any authorized Lexus dealer or repairer, or another
duly qualified and equipped professional immediately.

2064-2. Driving procedures
CT200h_OM_OM76102E_(EE)
For the shift positions
When the power switch is off, the shift position cannot be changed.
When the power switch is in ON mode (the hybrid system is not operating), the
shift position can only be changed to N. The shift position will be changed to N
even if the shift lever is shifted to D or R and held in that position.
When the “READY” indicator is on, the shift position can be changed from P to
D, N or R.
When the “READY” indicator is flashing, the shift position cannot be changed
from P to another position even if the shift lever is operated. Wait until the
“READY” indicator changes from a flashing to a solid light, and then operate
the shift lever again.
The shift position can only be changed to B directly from D.
In addition, if an attempt is made to change the shift position by moving the shift
lever or by pressing the P position switch in any of the following situations, the
buzzer will sound and the shifting operation will be disabled or the shift position
will automatically change to N. When this happens, select an appropriate shift
position.
Situations where the shifting operation will be disabled:
• When an attempt is made to change the shift position from P to another posi-
tion by moving the shift lever without depressing the brake pedal.
• When an attempt is made to change the shift position from P or N to B by
moving the shift lever.
Situations where the shift position will automatically change to N:
• When the P position switch is pressed while the vehicle is running.
*1
• When an attempt is made to select the R position by moving the shift lever
when the vehicle is moving forward.
*2
• When an attempt is made to select the D position by moving the shift lever
when the vehicle is moving in reverse.
*3
• When an attempt is made to change the shift position from R to B by moving
the shift lever.
*1: Shift position may be changed to P when driving at extremely low speeds.
*2: Shift position may be changed to R when driving at low speeds.
*3: Shift position may be changed to D when driving at low speeds.
Reverse warning buzzer
When shifting into R, a buzzer will sound to inform the driver that the shift posi-
tion is in R.

2084-2. Driving procedures
CT200h_OM_OM76102E_(EE)
WA R N I N G
When driving on slippery road surfaces
Do not accelerate or shift the shift position suddenly.
Sudden changes in engine braking may cause the vehicle to spin or skid, result-
ing in an accident.
For the shift lever
Do not remove the shift lever knob or use anything but a genuine Lexus shift
lever knob. Also, do not hang anything on the shift lever.
Doing so could prevent the shift lever from returning to position, causing unex-
pected accidents to occur when the vehicle is in motion.
P position switch
Do not press the P position switch while the vehicle is moving.
If the P position switch is pressed when driving at very low speeds (for exam-
ple, directly before stopping the vehicle), the vehicle may stop suddenly when
the shift position switches to P, which could lead to an accident.
NOTICE
Hybrid battery (traction battery) charge
If the shift position is in N, the hybrid battery (traction battery) will not be
charged. To help prevent the battery from discharging, avoid leaving the N
position selected for an extended period of time.
Situations where P position control system malfunctions are possible
If any of the following situations occurs, P position control system malfunc-
tions are possible.
Immediately stop the vehicle in a safe place on level ground, apply the parking
brake, and then contact any authorized Lexus dealer or repairer, or another duly
qualified and equipped professional.
When the warning message indicating the P position control system appears
on the multi-information display. (P. 581)
When the shift position indicator remains off.
Notes regarding shift lever and P position switch operation
Avoid repeatedly operating the shift lever and P position switch in quick suc-
cession.
The system protection function may activate and it will not be temporarily pos-
sible to shift the shift position other than P. If this happens, please wait for a
while before attempting to change the shift position again.

2184-3. Operating the lights and wipers
CT200h_OM_OM76102E_(EE)
Windshield wipers and washer
The wiper operation is selected by moving the lever as follows.
Intermittent windshield wipers with interval adjuster
Intermittent operation
Low speed operation
High speed operation
Temporary operation
Wiper intervals can be adjusted when intermittent operation is selected.
Increases the intermittent wind-
shield wiper frequency
Decreases the intermittent wind-
shield wiper frequency
Operating the wiper lever
1
2
3
4
5
6

2194-3. Operating the lights and wipers
4
Driving
CT200h_OM_OM76102E_(EE)
Washer/wiper dual operation
The wipers will automatically oper-
ate a couple of times after the washer
squirts.
Vehicles with headlight cleaners: If
the headlights are on, the headlight
cleaners will operate once.
Rain-sensing windshield wipers
Rain-sensing operation
Low speed operation
High speed operation
Temporary operation
When “AUTO” is selected, the wip-
ers will operate automatically when
the sensor detects falling rain. The
system automatically adjusts wiper
timing in accordance with rain vol-
ume and vehicle speed.
7
1
2
3
4

2204-3. Operating the lights and wipers
CT200h_OM_OM76102E_(EE)
The sensor sensitivity can be adjusted when “AUTO” is selected.
Increases the sensitivity
Decreases the sensitivity
Washer/wiper dual operation
The wipers will automatically oper-
ate a couple of times after the washer
squirts.
Vehicles with headlight cleaners: If
the headlights are on, the headlight
cleaners will operate once.
The windshield wipers and washer can be operated when
The power switch is in ON mode.
Raindrop sensor (vehicles with rain-sensing windshield wipers)
If the wiper switch is turned to the “AUTO” position while the power switch is
in ON mode, the wipers will operate once to show that AUTO mode is acti-
vated.
If the temperature of the raindrop sensor is 90C (194F) or higher, or -15C
(5F) or lower, automatic operation may not occur. In this case, operate the wip-
ers in any mode other than “AUTO”.
If no windshield washer fluid sprays
Check that the washer nozzles are not blocked if there is washer fluid in the
washer fluid tank.
5
6
7
The raindrop sensor judges the amount of
raindrops.
An optical sensor is adopted. It may not
operate properly when sunlight from the
rising or setting of the sun intermittently
strikes the windshield, or if bugs etc. are
present on the windshield.