2013 Lexus CT200h Headlight

1022. Instrument cluster
CT200h_OM_OM76102E_(EE)
*1: These lights turn on when the power switch is turned to ON mode to indicate
that a system check is being performed. They will turn off after the hybrid sys-
tem is on, or after a few seconds. There may be a malfunction in a system if
the lights do not turn on, or turn off. Have the vehicle inspected by any autho-
rized Lexus dealer or repairer, or another duly qualified and equipped profes-
sional.
*2: The light flashes to indicate a malfunction.
*3: This light illuminates on the center panel.
The indicators inform the driver of the operating state of the vehicle’s
various systems.
Indicators
Turn signal indicator
(P. 209)“ECO MODE” indica-
tor
(P. 265)
Tail light indicator
(P. 211)“SPORT MODE”
indicator (P. 265)
Headlight high beam
indicator (P. 212)
(if
equipped)
Cruise control indicator
(P. 228, 231)
(if
equipped)
Front fog light indicator
(P. 216)
(if
equipped)
Radar cruise control
indicator (P. 231)
Rear fog light indicator
(P. 216)
(if
equipped)
Lexus parking
assist-sensor indicator
(P. 245)
“READY” indicator
(P. 196)
*1, 2Slip indicator light
(P. 268, 271)
EV indicator (P. 79)
*1“TRC OFF” indicator
(P. 268)

1062. Instrument cluster
CT200h_OM_OM76102E_(EE)
Switches between odometer and
trip meter displays. When the trip
meter is displayed, pressing and
holding the button will reset the trip
meter.
The brightness of the instrument panel lights can be adjusted by turning
the dial.
Brighter
Darker
When the headlight switch is turned
to ON, the brightness will be
reduced slightly unless the control
dial is turned fully up.
When the dial is turned fully down,
the cup holder light and the footwell
lights will turn off. (P. 461)
Changing the display
Instrument panel light control
1
2

1733-4. Adjusting the steering wheels and mirrors
3
Operation of each component
CT200h_OM_OM76102E_(EE)
Auto anti-glare inside rear view mirror
Responding to the level of brightness of the headlights of vehicles behind,
the reflected light is automatically reduced.
Changing automatic anti-glare
function mode
On/off
When the automatic anti-glare func-
tion is in ON mode, the indicator
illuminates.
The function will set to ON mode
each time the power switch is turned
to ON mode.
Pressing the button turns the func-
tion to OFF mode. (The indicator
also turns off.)
To prevent sensor error (vehicles with auto anti-glare inside rear view mirror)
Indicator
To ensure that the sensors operate properly,
do not touch or cover them.
WA R N I N G
Do not adjust the position of the mirror while driving.
Doing so may lead to mishandling of the vehicle and cause an accident, result-
ing in death or serious injury.

185
4Driving
CT200h_OM_OM76102E_(EE)
4-1. Before driving
Driving the vehicle............ 186
Cargo and luggage ............ 194
Trailer towing.................... 195
4-2. Driving procedures
Power (ignition) switch ..... 196
EV drive mode .................. 201
Hybrid transmission .......... 203
Turn signal lever ............... 209
Parking brake .................... 2104-3. Operating the lights
and wipers
Headlight switch ................211
Fog light switch ................ 216
Windshield wipers and
washer ............................. 218
Rear window wiper and
washer ............................. 222
Headlight cleaner switch .. 223
4-4. Refueling
Opening the fuel tank cap . 224
4-5. Using the driving support
systems
Cruise control ................... 228
Dynamic radar cruise
control ............................. 231
Lexus parking
assist-sensor .................... 245
Rear view monitor system 253
Driving mode select
switch.............................. 265
Driving assist systems ...... 266
Hill-start assist control ...... 271
PCS (Pre-Crash Safety
system)............................ 273
4-6. Driving tips
Hybrid vehicle driving tips 281
Winter driving tips ............ 284

211
4 4-3. Operating the lights and wipers
Driving
CT200h_OM_OM76102E_(EE)
Headlight switch
Turning the end of the lever turns on the lights as follows:
The daytime running
lights turn on.
The front position, tail,
license plate and instru-
ment panel lights turn on.
The headlights and all
lights listed above turn
on.
The headlights, daytime
running lights and front
position lights turn on
and off automatically.
(When the power switch
is in ON mode.)
The headlights can be operated manually or automatically.
Operating instructions
1
2
3
4

2124-3. Operating the lights and wipers
CT200h_OM_OM76102E_(EE)
With the headlights on, push the
lever away from you to turn on
the high beams.
Pull the lever toward you to the cen-
ter position to turn the high beams
off.
Pull the lever toward you and
release it to flash the high beams
once.
You can flash the high beams with
the headlights on or off.
This system allows the headlights to be turned on for 30 seconds when
the power switch is off.
Pull the lever toward you and
release it with the light switch is in
or after turning the power
switch off.
Pull the lever toward you and release
it again to turn off the lights.
Turning on the high beam headlights
1
2
Follow me home system

2134-3. Operating the lights and wipers
4
Driving
CT200h_OM_OM76102E_(EE)
The level of the headlights can be adjusted according to the number of
passengers and the loading condition of the vehicle.
Raises the level of the headlights
Lowers the level of the head-
lights
Guide to dial settings
Manual headlight leveling dial (if equipped)
1
2
Occupancy and luggage load conditionsDial positionOccupantsLuggage load
DriverNone0
Driver and front
passengerNone0
All seats occupiedNone1.5
All seats occupiedFull luggage loading2.5
DriverFull luggage loading4

2144-3. Operating the lights and wipers
CT200h_OM_OM76102E_(EE)
Daytime running light system
To make your vehicle more visible to other drivers, the front position lights turn
on automatically (at an increased intensity) whenever the hybrid system is started
and the parking brake is released. Daytime running lights are not designed for
use at night.
Headlight control sensor
Automatic light off system
When the light switch is in the or position: The headlights turn off
automatically if the power switch is turned to ACCESSORY mode or OFF.
When the light switch is in the position: The headlights and all lights turn
off automatically if the power switch is turned to ACCESSORY mode or OFF.
To turn the lights on again, turn the power switch to ON mode, or turn the light
switch off once and then back to the
or position.
Automatic headlight leveling system (if equipped)
The level of the headlights is automatically adjusted according to the number of
passengers and the loading condition of the vehicle to ensure that the headlights
do not interfere with other road users.
Light reminder buzzer (if equipped)
A buzzer sounds when the power switch is turned off or turned to ACCESSORY
mode and the driver’s door is opened while the lights are turned on. The sensor may not function properly if an
object is placed on the sensor, or anything
that blocks the sensor is affixed to the wind-
shield.
Doing so interferes with the sensor detect-
ing the level of ambient light and may cause
the automatic headlight system to malfunc-
tion.