2013 Lancia Ypsilon Warning lights ice

[x] Cancel search: Warning lights ice

Page 155 of 315

Lancia Ypsilon 2013  Owner handbook (in English) IMPORTANT
Do not wash the seats with water or pressurised
steam (by hand or at automatic seat washing
stations).
The front airbags and/or side bags may be
deployed if the car is subject to violent imp

Page 156 of 315

Lancia Ypsilon 2013  Owner handbook (in English) WARNING
Do not travel carrying objects in your
lap, in front of your chest or between
your lips (pipe, pencils, etc.). They could
cause severe injury if the airbag is deployed.
WARNING
The expiry date

Page 163 of 315

Lancia Ypsilon 2013  Owner handbook (in English) Electrical devices
Only use electrical devices for the amount of time
needed. The heated rear window, additional
headlights, windscreen wipers and heater fan need
a considerable amount of energy, ther

Page 165 of 315

Lancia Ypsilon 2013  Owner handbook (in English) In addition to the electrical branches, the car's
electrical system can be connected only to the
supply cable for an electric brake and to the cable
for an internal trailer light, though not more

Page 166 of 315

Lancia Ypsilon 2013  Owner handbook (in English) All four tyres should be the same (brand and
track) to ensure greater safety when driving and
braking and better driveability. Remember that
you should not change the rotation direction of the
tyres.

Page 174 of 315

Lancia Ypsilon 2013  Owner handbook (in English) Under these conditions, you may continue
travelling at moderate speed without demanding
excessive effort from the engine. Prolonged use
of the car with the warning light on may cause
damage. Contact a

Page 178 of 315

Lancia Ypsilon 2013  Owner handbook (in English) Dusk sensor failure
(for versions/markets, where provided)
The warning light switches on (together with a
message on the display) when a dusk sensor
failure is detected.
Engine oil pressure sensor fai

Page 180 of 315

Lancia Ypsilon 2013  Owner handbook (in English) START&STOP SYSTEM ACTIVATION/
DEACTIVATION
START&STOP SYSTEM FAILURE
Start&Stop system activation
A message will be displayed when the Start&Stop
system is on. In this condition the LED on the
button