2013 JEEP WRANGLER radio antenna

Satellite Antenna
To ensure optimum reception, do not place items on the
roof around the rooftop antenna location. Metal objects
placed within the line of sight of the antenna will cause
decreased performance. Larger luggage items such as
bikes should be placed as far rearward as possible, within
the loading design of the rack. Do not place items directly
on or above the antenna.
Reception Quality
Satellite reception may be interrupted due to one of the
following reasons:
•The vehicle is parked in an underground parking
structure or under a physical obstacle.
• Dense tree coverage may interrupt reception in the
form of short audio mutes. •
Driving under wide bridges or along tall buildings can
cause intermittent reception.
• Placing objects over or too close to the antenna can
cause signal blockage.
Operating Instructions - Uconnect® (Satellite)
Mode
NOTE: The ignition switch must be in the ON/RUN or
ACC position to operate the radio.
SEEK Buttons
Press and release the SEEK buttons to search for the next
channel in Satellite mode. Press the right switch to seek
up and the left switch to seek down. The radio will
remain tuned to the new channel until you make another
selection. Holding either button will bypass channels
without stopping until you release it.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 357

Satellite Antenna
To ensure optimum reception, do not place items on the
roof around the rooftop antenna location. Metal objects
placed within the line of sight of the antenna will cause
decreased performance. Larger luggage items such as
bikes should be placed as far rearward as possible, within
the loading design of the rack. Do not place items directly
on or above the antenna.
Reception Quality
Satellite reception may be interrupted due to one of the
following reasons:
•The vehicle is parked in an underground parking
structure or under a physical obstacle.
• Dense tree coverage may interrupt reception in the
form of short audio mutes. •
Driving under wide bridges or along tall buildings can
cause intermittent reception.
• Placing objects over or too close to the antenna can
cause signal blockage.
Operating Instructions - Uconnect® (Satellite) Mode
NOTE: The ignition switch must be in the ON/RUN or
ACC position to operate the radio.
SEEK Buttons
Press and release the SEEK buttons to search for the next
channel in Satellite mode. Press the right switch to seek
up and the left switch to seek down. The radio will
remain tuned to the new channel until you make another
selection. Holding either button will bypass channels
without stopping until you release it.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 383

NOTE:If you experience difficulty in playing a particular
disc, it may be damaged (i.e., scratched, reflective coating
removed, a hair, moisture or dew on the disc) oversized, or
have protection encoding. Try a known good disc before
considering disc player service.
RADIO OPERATION AND MOBILE PHONES
Under certain conditions, the mobile phone being on in your
vehicle can cause erratic or noisy performance from your
radio. This condition may be lessened or eliminated by
relocating the mobile phone antenna. This condition is not
harmful to the radio. If your radio performance does not
satisfactorily “clear” by the repositioning of the antenna, it is
recommended that the radio volume be turned down or off
during mobile phone operation when not using Uconnect®
(if equipped).
CLIMATE CONTROLS
The air conditioning and heating system is designed to
make you comfortable in all types of weather.
Manual Heating And Air Conditioning
The Manual Temperature Controls consist of a series of
outer rotary dials and inner push knobs.
Manual Temperature Control
4
UNDERSTANDING YOUR INSTRUMENT PANEL 395

Interior Care
Use MOPAR® Total Clean or equivalent to clean fabric
upholstery and carpeting.
Interior Trim should be cleaned starting with a damp
cloth, a damp cloth with MOPAR® Total Clean or equiva-
lent , then MOPAR® Spot & Stain Remover or equivalent
if absolutely necessary. Do not use harsh cleaners or
Armor All®. Use MOPAR® Total Clean or equivalent to
clean vinyl upholstery.
WARNING!
Do not use volatile solvents for cleaning purposes.
Many are potentially flammable and, if used in
closed areas, they may cause respiratory harm.
CAUTION!
When installing hanging air fresheners in your ve-
hicle, read the installation instructions carefully.
Some air fresheners will damage the finish of
painted or decorated parts if allowed to directly
contact any surface.
Glass Surfaces
All glass surfaces should be cleaned on a regular basis with
MOPAR® Glass Cleaner, or any commercial household-
type glass cleaner. Never use an abrasive type cleaner. Use
caution when cleaning the inside rear window equipped
with electric defrosters or the right rear quarter window
equipped with the radio antenna. Do not use scrapers or
other sharp instrument that may scratch the elements.
7
MAINTAINING YOUR VEHICLE 603

Cavity Cartridge Fuse Mini FuseDescription
M7 20 Amp YellowPower Outlet #2 (BATT/ACC SELECT)
M8 20 Amp Yellow Front Heated Seat
M9 20 Amp YellowRear Heated Seat – If Equipped
M10 15 Amp Blue Ignition Off Draw – Vehicle Entertainment System,
Satellite Digital Audio Receiver (SDARS), DVD,
Hands-Free Module, RADIO, Antenna, Universal Garage Door Opener, Vanity Lamp
M11 10 Amp Red (Ignition Off Draw) Climate Control System,
Underhood Lamp
M12 30 Amp Green Amplifier
M13 20 Amp Yellow Ignition Off Draw – Cabin Compartment Node,
Wireless Control Module, SIREN, MultifunctionControl Switch
M14 20 Amp YellowTrailer Tow (Export Only)
610 MAINTAINING YOUR VEHICLE

ABS (Anti-Lock Brake System)................307
Adding Engine Coolant (Antifreeze) ............588
Adding Fuel ............................ .517
Additives, Fuel .......................... .515
Airbag ..................................62
Airbag Deployment ........................71
Airbag Light .............................73
Airbag Maintenance ........................72
Airbag, Side ..............................70
Air Cleaner, Engine (Engine Air Cleaner Filter) . . . .577
Air Conditioner Maintenance .................579
Air Conditioning ......................... .395
Air Conditioning Controls ...................395
Air Conditioning Filter .....................407
Air Conditioning, Operating Tips ..............408
Air Conditioning Refrigerant .................579
Air Conditioning System ....................395
Air Pressure, Tires ........................ .489
Alarm Light ............................ .309Alarm (Security Alarm)
......................21
Alterations/Modifications, Vehicle ...............9
Antenna, Satellite Radio .....................357
Antifreeze (Engine Coolant) ..................588
Disposal ............................. .590
Anti-Lock Brake System (ABS) ................459
Anti-Lock Warning Light ....................307
Appearance Care ........................ .600
Arming Theft System (Security Alarm) ...........22
Assistance Towing ........................ .130
Auto Down Power Windows ..................44
Automatic Dimming Mirror ..................113
Automatic Door Locks ......................41
Automatic Headlights ..................... .170
Automatic Oil Change Indicator ...............329
Automatic Temperature Control (ATC) ..........399
Automatic Transaxle Interlock System .........................17
644 INDEX

Safety Checks Inside Vehicle.................101
Safety Checks Outside Vehicle ................103
Safety Defects, Reporting ....................637
Safety, Exhaust Gas ....................... .100
Safety Information, Tire .....................476
Safety Tips ............................. .100
Satellite Radio Antenna .....................357
Schedule, Maintenance .....................622
Seat Belt Maintenance ..................... .604
Seat Belt Reminder .........................60
Seat Belts ................................50
Adjustable Upper Shoulder Anchorage .........56
And Pregnant Women .....................61
Child Restraint ..........................75
Extender ..............................61
Front Seat .............................50
Inspection ........................... .101
Pretensioners ...........................60 Reminder
............................ .305
Untwisting Procedure .....................56
Seats ................................. .153
Adjustment .......................... .154
Easy Entry ........................... .156
Fold and Tumble Rear ....................163
Heated .............................. .160
Height Adjustment ..................... .155
Rear Folding ......................... .165
Removal ............................ .164
Seatback Release ....................... .156
Tilting .............................. .156
Security Against Theft .......................21
Security Alarm (Theft Alarm) ..................21
Sentry Key (Immobilizer) ....................18
Sentry Key Programming ....................20
Sentry Key Replacement .....................19
Service Assistance ........................ .633
10
INDEX 657

INSTALLATION OF RADIO TRANSMITTING
EQUIPMENTSpecial design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained personnel.
The following must be observed during installation.
The positive power connection should be made directly to
the battery and fused as close to the battery as possible. The
negative power connection should be made to body sheet
metal adjacent to the negative battery connection. This
connection should not be fused.
Antennas for two-way radios should be mounted on the roof
or the rear area of the vehicle. Care should be used in
mounting antennas with magnet bases. Magnets may affect
the accuracy or operation of the compass on vehicles so
equipped.The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use only
fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to ensure
a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interference
between the communications equipment and the vehicle’s
electronic systems.