2013 JEEP WRANGLER headlamp

Flash Lamp with Lock
When on is selected, the front and rear turn signals will
flash when the doors are locked or unlocked with the
RKE transmitter. This feature may be selected with or
without the Sound Horn with Lock feature selected. To
make your selection, press and release the SELECT
button until “On” or “Off” appears.
Headlamp Off Delay
When this feature is selected, the driver can choose to
have the headlights remain on for 0, 30, 60, or 90 seconds
when exiting the vehicle. To make your selection, press
and release the SELECT button until “0,” “30,” “60,” or
“90” appears.
Headlamps with Wipers (Available with Auto
Headlights Only)
When on is selected, and the headlight switch is in the
AUTO position, the headlights will turn on approxi-
mately 10 seconds after the wipers are turned on. If the
headlights were turned on by this feature they will also
turn off when the wipers are turned off. To make your
selection, press and release the SELECT button until
“ON” or “OFF” appears.
NOTE:Turning the headlights on during the daytime
causes the instrument panel lights to dim. To increase the
brightness, refer to “Lights” in “Understanding The
Features Of Your Vehicle”.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 337

▫Clutch Hydraulic System (Manual
Transmission) – If Equipped ..............597
▫ Manual Transmission – If Equipped ........597
▫ Transfer Case ....................... .598
▫ Front/Rear Axle Fluid ..................599
▫ Appearance Care And Protection From
Corrosion .......................... .600
 FUSES ............................. .607
▫ Totally Integrated Power Module ..........607
 VEHICLE STORAGE ....................613
 REPLACEMENT BULBS .................614 
BULB REPLACEMENT ..................615
▫ Headlamp ......................... .615
▫ Front Park/Turn Signal .................616
▫ Front Side Marker .....................616
▫ Front Fog Lamp ..................... .616
▫ Rear Tail, Stop, Turn Signal, And
Backup Lamp ....................... .617
▫ Center High-Mounted Stop Lamp (CHMSL) . .617
 FLUID CAPACITIES ....................618
 FLUIDS, LUBRICANTS AND
GENUINE PARTS ..................... .619
▫ Engine ............................ .619
▫ Chassis ............................ .620
568 MAINTAINING YOUR VEHICLE

Cavity Cartridge Fuse Mini FuseDescription
J1 — —
J2 30 Amp Pink Transfer Case Module
J3 — —
J4 25 Amp Natural Driver Door Node
J5 25 Amp Natural Passenger Door Node
J6 40 Amp Green Anti-Lock Brake System (ABS) Pump/Stability
Control System
J7 30 Amp Pink Anti-Lock Brake System (ABS) Valve/Stability
Control System
J8 — —
J9 40 Amp Green PZEV Sec Motor/Flex Fuel
J10 30 Amp Pink Headlamp Wash Relay/Manifold Tuning Valve
J11 30 Amp Pink Sway Bar
J12 30 Amp Pink Rear Blower Motor/Radiator Fan
J13 60 Amp Yellow Ignition Off Draw (IOD) – Main
608 MAINTAINING YOUR VEHICLE

Cavity Cartridge Fuse Mini FuseDescription
M26 10 Amp Red Power Window Switch, Driver Window Switch
M27 10 Amp RedIgnition Switch Feed, Wireless Module
M28 10 Amp RedPowertrain Control Module
M29 10 Amp Red Powertrain
M30 15 Amp BlueWiper Motor Frt, J1962 Diagnostic Feed
M31 20 Amp Yellow Backup Lamps
M32 10 Amp RedAirbag Controller, TT EUROPE
M33 10 Amp RedPowertrain Controller
M34 10 Amp Red Park Assist, Climate Control System, Headlamp
Wash, Compass
M35 10 Amp RedHeated Mirrors
M36 20 Amp Yellow Power Outlet
M37 10 Amp Red Anti-Lock Brake System, Electronic Stability
Control, Stop Lamp Switch, Fuel Pump Relay
M38 25 Amp Natural Lock/Unlock Motors
612 MAINTAINING YOUR VEHICLE

REPLACEMENT BULBS
Interior Bulbs
Bulb Number
Automatic Transmission Indicator
Lamp 658
Heater Control Lamps (2) 194
Rocker Switch Indicator Lamp
(Rear Window Defogger, and Rear
Wash/Wipe) **
Soundbar Dome Lamp 912
** Bulbs only available from authorized dealer.
Exterior Bulbs
Bulb Number
Headlamps (2) H13
Front Park/Turn Signal Lamps (2) 3157
Front Side Marker Lamps (2) 168
Fog Lamps PSX24W
Rear Stop/Tail/Turn Lamps (2) 3157
Center High-Mounted Stop Lamp L.E.D.
Backup Lamps (2) 3157
License Lamp 194
NOTE:
Numbers refer to commercial bulb types that can be
purchased from your local authorized dealer.
If a bulb needs to be replaced, visit your authorized
dealer or refer to the applicable Service Manual.
614 MAINTAINING YOUR VEHICLE

BULB REPLACEMENT
NOTE:Lens fogging can occur under certain atmo-
spheric conditions. This will usually clear as atmospheric
conditions change to allow the condensation to change
back into a vapor. Turning the lamps on will usually
accelerate the clearing process.
Headlamp
1. Open hood and support using prop rod.
2. Remove the front grille. Turn the retainers along the top 1/4 turn counterclockwise and remove.
3. Pull the bottom of the grille away starting at one side and working toward the other.
4. Turn both park and turn signal socket assemblies 1/4 turn counterclockwise and remove.
5. Remove the four screws holding the metal retaining ring. 6. Remove the lamp from the collar.
7. Grasp the bulb and turn 1/4 turn counterclockwise.
8. Pull the bulb from the housing.
9. Push connector locking tab to the unlock position.
10. Remove connector from bulb.
11. Push connector onto new bulb base, and push the
connector locking tab to the lock position.
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.
12. Reinstall bulb housing. Rotate the bulb 1/4 turn clockwise.7
MAINTAINING YOUR VEHICLE 615