CAUTION!
•Damage to the fuel system or emission
control system could result from using an
improper fuel cap (gas cap). A poorly fitting
cap could let impurities into the fuel sys-
tem. Also, a poorly fitting aftermarket cap
can cause the “Malfunction Indicator Light
(MIL)” to illuminate, due to fuel vapors
escaping from the system.
• A poorly fitting gas cap may cause the MIL
to turn on.
• To avoid fuel spillage and overfilling, do not
“top off” the fuel tank after filling.
WARNING!
•Never have any smoking materials lit in or
near the vehicle when the gas cap is
removed or the tank is being filled.
(Continued)
WARNING!(Continued)
•Never add fuel when the engine is running.
This is in violation of most state and fed-
eral fire regulations and may cause the
malfunction indicator light to turn on.
•
A fire may result if gasoline is pumped into a
portable container that is inside of a vehicle.
You could be burned. Always place gas
containers on the ground while filling.
NOTE:
• When the fuel nozzle “clicks” or shuts off,
the fuel tank is full.
•
Tighten the gas cap about one-quarter turn
until you hear one click. This is an indica-
tion that the cap is properly tightened.
•If the gas cap is not tighten properly, the MIL
will come on. Be sure the gas cap is tight-
ened every time the vehicle is refueled.
Emergency Fuel Filler Door Release
If you are unable to open the fuel filler door, use
the fuel filler door emergency release.
1. Open the liftgate.
2. Push down on the inboard edge of the left
storage bin, this will pop up the outboard edge.
3. Grab popped up outboard edge with other
hand to disengage snaps.
4. Remove the storage bin.
5. Pull the release cable.
Release Cable
277
