2013 INFINITI M fog light

4
Forest Air® System (if so equipped)
this system helps keep the air inside your vehicle
clean using an automatic air intake and ventilation
system that monitors air quality with outside and
inside sensors.

Automatic humidity control prevents over-drying of
the passenger compartment and fogging of the
windshield. when the system is On, the defroster
may automatically turn on.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s Manual.
ECO Pedal System (if so equipped)

with the Infiniti drive Mode Selector switch
01 in
the ECO Mode, the ec O pedal system assists the
driver in improving fuel economy.

the ec O pedal system applies force to make the
accelerator pedal heavier depending on the
accelerator pedal operation.
For more information, refer to the “Starting and driving (section 5)” of your
Owner’s Manual.
Blind Spot Warning (BSW) and Blind Spot Intervention™ (BSI) (if so equipped)

the Blind Spot warning (BSw) system alerts the
driver when another vehicle moves into the vehicle’s
blind spot area.

An indicator light
01 near the driver’s outside mirror

will illuminate if the radar sensors detect a vehicle in
the detection zone.

the Blind Spot Intervention™ (BSI) system can assist
the driver in returning the vehicle to the center of the
traveling lane by applying individual brake pressure
to the left or right wheels for a short period of time.

the indicator light
02 will first illuminate in orange and
then turn green before turning off. this indicates that
the Blind Spot warning (BSw) and Blind Spot Intervention (BSI) systems are operational.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01
02
01
new system features

11
FOG LIGht S
wItch
nO te: the headlights must be on and the low beams

selected for the fog lights to operate.

turn the switch (inside collar) to the
position
06
to turn the fog lights on.

turn the switch (inside collar)
to the OFF position to
turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
06
Windshield Wiper/Washer Switch

Move the lever to the following positions to operate
the windshield wipers:

01 Mist (MISt) - One sweep operation of the wipers.

02 Auto (A U tO ) - Operates the rain-sensing wipers
intermittently. the intermittent speed can be
adjusted by twisting the time control ring

03 .

04 Low (LO) - wipers operate at a continuous
low-speed.

05 high (hI) - wipers operate at a continuous
high-speed.

06 p ull the lever toward you to activate the washer.
the wipers will operate several times.
RAIn-S enSInG A utO wIpeR S yS teM

the rain-sensing auto wiper system can automatically turn on the wipers and adjust the wiper
speed depending on the rainfall and the vehicle speed.

to set the rain-sensing auto wiper system, push the lever down to the AU tO position
02 . the

wiper will sweep once while the ignition switch is in the ON position.

the rain sensor sensitivity level can be adjusted by turning the time control ring
03 toward the

front (high sensitivity) or toward the rear (low sensitivity).
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
MISt
OFF
AU tO
LO
hI
02
04
05
01
03
06

13
07 FAN SPEED CONtROL BUtt
ONS


press the left button to decrease the fan speed or press the right
button to increase
the fan speed.
08 DEFROS
tING/DEFOGGING FRONt AND SIDE WINDOWS

press the defroster control button
to turn the system on.
the A/c automatically turns
on when the defroster mode is selected. this feature removes humidity from the air.

to defrost the front and side windows, set the temperature controls
03 and fan speed

controls
07 to their maximum settings.

09 DEFROS
tING REAR WINDOW AND OUt SIDE MIRRORS

push the rear window defroster switch
to turn the system on or off.

this function automatically turns off after approximately 15 minutes.
10 FORES
t BUtt ON

press the forest button
to activate the Forest Air® system.


this system’s settings will activate the breeze mode, the outside odor and exhaust gas
detection sensor, the inside air quality sensor and the auto humidity control. the fan
speed and air flow is automatically set to the auto position.
11 INt
AkE AIR CONtROL BUtt ON


press the intake air control button to recirculate interior air inside the vehicle.
the
indicator light on the button will illuminate. this system is used to avoid certain
outside odors and helps to adjust the inside vehicle temperature more effectively.

the air recirculation mode cannot be activated when the air conditioner is in the front
defrost mode

.


press the intake air control button again to change the air circulation from the intake
air to the outside air. the
indicator light on the button will turn off.
12 OFF BUtt
ON

press the OFF button to turn the climate control system off.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s Manual.