11
Front Seat Adjustments
To slide the seat forward or backward, push the control
switch
01 forward or backward .
To recline the seatback, push the switch
02
forward or backward.
SEAT LIf TER
To raise or lower the front portion or height of the seat,
push the front or back end of the switch
01
up or down.
POWER LUMBAR SUPPORT (if so equipped for driver’s seat)
To adjust the seat lumbar support, push the front or back end of the switch
03 .
f
or more information, refer to the “Safety —— seats, seat belts and supplemental restraint system (section 1)” of your
Owner’s Manual.
2ND Row Seats
To slide the seat forward or backward, pull the center
of the bar
01 up and hold it while you slide the seat
forward or backward to the desired position. Release
the bar to lock the seat in position.
To recline the seatback, pull up on the seatback release
lever
02 and lean back. To bring the seatback forward,
pull the lever up and lean your body forward. Release
the lever to lock the seatback in position.
MULTI-MODE/CHILD SEAT ACCESS fUNCTION
If a child safety seat is installed on the passenger’s side of the 2nd row seat, the 3rd row can be
accessed without removing the child safety seat.
To access the 3rd row from outside the vehicle, lift up on the seatback release lever
03 .
EZ ENTRy MODE
To enter the 3rd row from outside the vehicle, lift up on the seatback lever
03 . This will release
the back of the seat and fold up the seat cushion.
Slide the entire seat forward for access to the rear seat.
To return the seat to a locked position, push the upper seatback rearward until the seatback and
track are locked. Push the seat cushion down.
for more information, refer to the “Safety —— seats, seat belts and supplemental restraint system (section 1)” of your Owner’s Manual.
010203
0102
03
12
first drive features
3RD Row Seats
To recline the seatback, pull up on the latch
01 located
on the outside corner of each seatback. Lean back until
the desired angle is obtained.
To bring the seatback forward again, pull up on the
latch
01 and move your body forward. The seatback
will move forward.
for more information, refer to the “Safety —— seats, seat belts and supplemental
restraint system (section 1)” of your Owner’s Manual.
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner
01 memory.
follow these procedures to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
• Adjust the driver’s seat, steering column and
outside mirrors to the desired positions using the
adjusting switches for each feature.
• Push the SET switch and within 5 seconds, push the memory switch (1 or 2) for at least 1 second.
• The indicator light on the memory switch you select will illuminate for approximately 5 seconds.
• The driver’s seat, steering column and outside mirror positions are now set to your preference.
These memorized positions can also be linked to your INfINITI Intelligent Key™.
for more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
To select the right or left side mirror, move the control
switch
01 right or left.
Adjust each mirror to the desired position using the
switch
02 .
To fold the outside rearview mirrors, push the switch
03 to the
position. To unfold the outside
rearview mirrors, push the switch
03 to the
position.
02
01
03
01
01
