2013 INFINITI G COUPE ECO mode

Black plate (205,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
1. Highlight [Help on Speaking] and push.
2. To confirm the page, scroll the screen using the INFINITI controller.
Voice recognition settings
The settings for easy operation of the voice
recognition system are displayed.
IVR01061. Highlight [Voice Recognition Settings]and push .
2. To confirm the page, scroll the screen using the INFINITI controller.
Adapting Voice Recognition System
to Your Voice
The voice recognition system is equipped
with a learning function to adapt to the
user’s voice for better recognition. It is
possible to confirm how to operate the
learning function through this tutorial.
IVR01071. Highlight [Adapting the System to YourVoice] and push . The tutorial
starts.
IVR01082. The voice guide demonstrates the steps that have to be performed.
3. When the tutorial is completed, the system automatically switches to the
Menu screen.
USING VOICE RECOGNITION SYS-
TEM
Initialization
When the ignition switch is pushed to the
ON position, Voice Recognition is initia-
lized, which may take up to one minute.
When completed, the system is ready to
accept voice commands. If >is
pushed before the initialization completes,
the display will show the message: “Sys-
tem not ready”.
BEFORE STARTING
To get the best recognition performance
out of Voice Recognition, observe the
following:
. The interior of the vehicle should be as
quiet as possible. Close the windows to
eliminate the surrounding noises (traf-
fic noise and vibration sounds, etc.),
which may prevent the system from
correctly recognizing the voice com-
mands.
. Wait until the tone sounds before
speaking a command.
. Speak in a natural conversational voice
without pausing between words.
9. Voice recognition
9-13
Condition: Language=NAM_English/

Black plate (206,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
9. Voice recognition
9-14
.If the air conditioner is set to “Auto”,
the fan speed is automatically lowered
so that voice commands can be recog-
nized more easily.
. The voice recognition system cannot be
operated when the retractable hard top
is not closed (for G37 Convertible only).
GIVING VOICE COMMANDS
1. Push located on the steering
wheel.
IVR01092. A list of commands appears on the screen, and the system announces,
“Please say a command”.
3. After the tone sounds and the icon on the screen changes from [
] to [],
speak a command.
Operating tips
. If the command is not recognized, the
system announces, “Please say again”.
Repeat the command in a clear voice.
. Push once to return to the
previous screen.
. To cancel the command, push and hold
>. The message, “Voice can-
celed” will be announced.
. Push >to stop the voice
prompt and give the command at once.
Remember to wait for the tone before
speaking.
. To adjust the volume of the system
feedback, push the volume control
buttons [+] or [−] on the steering wheel
or use the audio system volume control
knob while the system is making an
announcement.
How to speak numbers
INFINITI Voice Recognition requires a cer-
tain way to speak numbers when giving
voice commands. Refer to the following
examples. General rule:
Only single digits 0 (zero) to 9 can be used.
For example, to speak 500,
“five zero zero”
can be used, but “five hundred”cannot.
Examples:
1-800-662-6200
“One eight zero zero six six two six two
zero zero”
Improving Recognition of Phone numbers:
Recognition of phone numbers can be
improved by speaking the phone number
in 3 groups of numbers. For example, to
call 800-662-6200, speak “Eight Zero
Zero” first, and the system will then ask
to speak the next three digits. Then, speak
“Six Six Two”. After recognition, the
system will then ask to speak the last 4
digits. Speak, “Six Two Zero Zero”. Using
this method of phone digit entry can
improve recognition performance.INFO:
For best recognition, speak “zero”for the
number “0”and “oh” for the letter “o”.
Condition: Language=NAM_English/

Black plate (207,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
SYSTEM FEEDBACK ANNOUNCE-
MENT MODES
It is possible to select two modes, long or
short, for the announcement by the sys-
tem.
How to set
1. Push.
2. Highlight [Others] and push .
3. Highlight [Voice Recognition] and push .
IVR01114.Highlight [Minimize Voice Feedback]
and push . The indicator illumi-
nates, and the system announcement
mode switches to the short mode.
5. Push to return to the previous
screen. Push

Black plate (208,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
9. Voice recognition
9-16
IVR01134.Highlight [Speaker Adaptation] and
push .
IVR01145.Highlight the user whose voice is
memorized by the system, and push
.
IVR01156.Highlight [Start Speaker Adaptation
Learning] and push .
IVR01167. Highlight the voice command category
to be learned by the system, and push
. The voice command category
list is displayed.
JNI0150X8. Highlight the voice command to belearned by the system, and push
. The voice recognition system
starts.
JNI0151X9. The system announces, “Please say a
command”.
10. After the tone sounds and the icon on the screen changes from [
] to [],
speak a command.
Condition: Language=NAM_English/

Black plate (209,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
JNI0152X11. When the system has recognized thevoice command, the voice of the user is
learned. Push once to return to
the previous screen.
INFO:
With [Continuous Learning] set to on, the
system does not go back to the command
list screen, allowing to continue voice
command learning by the system.
12. If the system has learned the command correctly, “None”will change to
“Stored”.
Editing registered items
It is possible to edit user names and select
learning function settings.
1. Push . 2. Highlight [Others] and push
.
3. Highlight [Voice Recognition] and push .
IVR01204.Highlight [Speaker Adaptation] and
push .
IVR01215.Highlight a user to edit, and push
.
IVR01226. Highlight [Setting] and push .
IVR01237. Highlight an item to edit, and push
.
Setting items
.[Edit User Name]:
Edit the user name.
.[Delete Voice Data]:Reset the user voice that the voice
recognition system has learned.
9. Voice recognition
9-17
Condition: Language=NAM_English/

Black plate (210,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
9. Voice recognition
9-18
.[Continuous Learning]:Have the system learn the voice
commands of the user in succession,
without selecting commands one by
one.
VOICE COMMAND EXAMPLES
To use the voice recognition function,
speaking one command is sometimes
sufficient, but at other times it is necessary
to speak two or more commands. As
examples, some additional basic opera-
tions by voice commands are described
here.
Example 1: Switching map to 2D
(Plan View) mode
IVR01241. Push located on the steering
wheel.
2. The system announces, “Please say a
command”. 3. After the tone sounds and the icon on
the screen changes from [
] to [],
speak “Plan View Map”.
IVR01254. Voice feedback will be provided when
the command is accepted, and the map
is displayed in 2D (Plan View).
Example 2: Setting destination
using places list
IVR01261. Push located on the steering
wheel. 2. The system announces,
“Please say a
command”.
3. After the tone sounds and the icon on the screen changes from [
] to [],
speak “Places”.
IVR01274. If a route is already set, choose “Near
Current Location”, “Along Route”or
“Near Destination”.
5. After the tone sounds and the icon on the screen changes again, speak
“Along Route”.
IVR0128
Condition: Language=NAM_English/

Black plate (211,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
6. Voice feedback will be provided whenthe command is accepted, and the list
of places of interest categories ap-
pears.
7. After the tone sounds and the icon on the screen changes again, speak
“Two”.
IVR01298. Voice feedback will be provided whenthe command is accepted, and the list
of places of interest in the category
specified in the previous step appears.
9. After the tone sounds and the icon on the screen changes again, speak
“One”.
IVR013010. Voice feedback will be provided whenthe command is accepted, and the
system starts calculating a route to
the selected facility.
Example 3: Setting destination by
street address
1. Push located on the steering
wheel.
2. The system announces, “Please say a
command”.
3. Speak “Address”.
IVR0133
4. Speak the name of the state, “Califor-
nia”.
IVR01345. Speak the name of the city, “Gardena”.
IVR01356. Speak the name of the street, “South
Figueroa street”.
INFO:
Speak the street name precisely including
boulevard, way, north, south, etc. In Alter-
nate Command Mode, the system does not
recognize abbreviated names when they are
9. Voice recognition
9-19
Condition: Language=NAM_English/

Black plate (212,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
9. Voice recognition
9-20
spoken. In this case, the system does not
accept“Figueroa street” or“Figueroa”.
IVR01367. Voice feedback will be provided when
the command is accepted, and the list
of street names appears.
8. After the tone sounds and the icon on the screen changes again, speak
“One”.
IVR01379. Speak the house number.
“How to speak numbers”
(page 9-14)
INFO:
If the house number is unknown, speak “No
house number”.
IVR013810. To confirm the destination location on the map, speak “Show Map”. To
calculate a route, speak “Calculate
Route”.
Condition: Language=NAM_English/