2013 INFINITI FX Owner's Manual

3-28Pre-driving checks and adjustments
For more information, see“Automatic drive
positioner” (P.3-32).
GUID-0E6A7B36-6F14-49B7-8E47-FADFD89E0563
SPA2471
1. To block glare from the front, swing
down the main sun visor
*1. 2. To block glare from the side, remove
the main sun visor from the center
mount and swing the visor to the side
*2.
3. Slide the sun visor
*3in or out as
needed.
SUN VISORS

GUID-7EA98A31-E7A3-4913-AD21-96E01843E14F
SPA2447
INSIDE MIRRORGUID-5B83EE67-E9E9-45D0-832E-DF080FD9E09C
SPA2422A
Type A
SPA2450
Type B
Automatic anti-glare typeGUID-03C3FC21-1717-4122-B190-E80C6E9E78DE
switch*Bto make the
inside rearview mirror operate normally
and the indicator light will turn off. Push
the
switch again to turn the system on.
Type B: Push the “*”switch
*Cto make
the inside rearview mirror operate nor-
mally. The indicator light will turn off. Push
the “I”switch
*Dto turn the system on.
Do not allow any object to cover the
sensors
*Eor apply glass cleaner on
them. Doing so will reduce the sensitivity
of the sensor, resulting in improper
operation.
For the compass (if so equipped) opera-
tion, see “Compass” (P.2-9).
Pre-driving checks and adjustments3-29
MIRRORS

3-30Pre-driving checks and adjustments
SPA2214
OUTSIDE MIRRORSGUID-0F47C170-B53D-469E-B980-6262E97ED2E8
WARNING
Objects viewed in the outside mirror on the
passenger side are closer than they appear.
Be careful when moving to the right. Using
only this mirror could cause an accident.
Use the inside mirror or glance over your
shoulder to properly judge distances to
other objects.
Adjusting outside mirrorsGUID-173800D2-EA0E-45DA-A1C3-3B5C444AAE84

SPA1732A
Foldable outside mirrorsGUID-6304F622-C60E-4C4E-AD43-2AD64F0E8BCF
CAUTION
.Do not touch the mirrors while they are
moving. Your hand may be pinched, and
the mirror may malfunction.
. Do not drive with the mirrors stored. You
will be unable to see behind the vehicle.
. If the mirrors were folded or unfolded by
hand, there is a chance that the mirror
will move forward or backward during
driving. If the mirrors were folded or
unfolded by hand, be sure to adjust them again electrically before driving.
The outside rearview mirror remote control
operates when the ignition switch is in the
“ACC”
or“ON” position.
To fold the outside rearview mirrors, push
the outside rearview mirror folding switch
to the “CLOSE” position
*1. To unfold,
push to the “OPEN”position
*2.
If mirrors are manually operated or
bumped, the mirror body can become
loose at the pivot point. To correct electro-
nic mirror operation, cycle mirrors by
pushing the "CLOSE" switch until closed,
the push "OPEN" until mirror is in the open
position.
Reverse tilt-down feature (if so
equipped)
GUID-DA17CE23-684E-454F-B737-21D5F8261845

3-32Pre-driving checks and adjustments
SIC3869
VANITY MIRRORGUID-3780BCDB-5920-42A8-A7E5-61F0F7698B59

Initialize entry/exit functionGUID-CF566402-5592-4485-AD8B-9C26CE39C0D0
SPA2525
SEAT SYNCHRONIZATION FUNCTIONGUID-E98A706D-B662-4EF7-B535-D126949B4047

3-34Pre-driving checks and adjustments
holding the SET switch for more than 10
seconds while the ignition switch is in the
ACC position.
The indicator lights on the memory
switches (1 and 2) will blink once when
the function is canceled, and the indicator
lights will blink twice when the function is
activated. Note that the indicator lights
may illuminate after 5 seconds while
holding the SET switch. This indicates
readiness for linking the Intelligent Key to
a stored memory position. Keep the SET
switch pushed for more than 10 seconds to
turn on or off the seat synchronization
function.
MEMORY STORAGEGUID-7C0BBA0A-C562-4C67-B0C1-457131FC41EB
button on the
Intelligent Key. If the indicator light
blinks, the Intelligent Key is linked to
that memory setting. Push the ignition switch to the OFF posi-
tion, and then push the
button on the
Intelligent Key. The driver’s seat, steering
wheel and outside mirrors will move to the
memorized position or to the exit position
when the entry/exit function is set to
active.
Confirming memory storageGUID-E77C3565-8BEE-460B-9BBC-75EC608F88AD

Selecting the memorized positionGUID-2FEA9244-0775-4478-9531-20E8C2DBBEC5